Vitek VTC-IRB424M Manual

Vitek Ikke kategoriseret VTC-IRB424M

Læs gratis den danske manual til Vitek VTC-IRB424M (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Vitek VTC-IRB424M, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
VITEK
• High Density 1/4” Super DIS
• 700 TV Lines of Resolution
• 24 Infrared LEDs with up to 50’ Range
• 3.0mm Standard Lens Included
• IP-66 Rated Water Resistance
• 12 VDC Operation
VTC-IRB424M
Day/Night Infrared Bullet Camera
4
VITEK LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of any
rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a
period of three (3) years, or as otherwise stated above, from the date of
purchase by the end user. This warranty is non-transferable and extends
only to the original buyer or end user customer of a Vitek Authorized
Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way then the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
Vitek makes no warranty or guarantee whatsoever with respect to prod-
ucts sold or purchased through unauthorized sales channels. Warranty
support is available only if product is purchased through a Vitek Author-
ized Reseller.
28492 Constellation Road ValenCia, Ca 91355
WWW.ViteKCCtV.CoM | 888-ViteK-70
2 3
SPECIFICATIONS
CAUTION:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the pos-
sibility of such damages.
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient
magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly “lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be col-
lected separately at the product end-of-life. This applies to your product and any peripherals marked with
this symbol. Do not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or remove
any content in this manual at any time.
PACKAGE CONTENTS
CONNECTION
1 x VTC-IR424M Camera
1 x Mounting Bracket
1 x User Manual
1 x Hex Wrench
1 x Mounting Screws/Anchors Pack
1 x Mounting Template
1. Connect the camera video output to the monitor video input with a 75Ω coaxial cable.
2. DC12V Input Terminal
Connect the power connector of the camera to a 12V DC regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The
tolerance of this unit is DC12V ± 10%. Over the maximum DC12V power input will damage the
video output connector (VIDEO OUT).
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
Image Device
Resolution
Effective Pixels
Minimum illumination
Infrared LEDs
IR Distance
Day/Night
Built-In Lens
Scanning System
S/N Ratio
White Balance
Signal System
Weather Resistance
Power Source
Power Consumption
Operating Conditions
Dimension
Weight
1/4” Super DIS CMOS
700 TVL
720(H) x 480(V)
0 Lux (IR LED ON)
24 IR LEDs
50 ft
Auto
3.0mm IR Corrected
2:1 Interlace
≥ 46dB
ATW
NTSC/PAL
IP66
DC12V ± 10%
80mA / 260mA (IR OFF/ON)
-22°F to +104°F (-30°C to +40°C)
4.37” x 2.64” x 2.60” (111mm x 67mm x 66mm)
16.2 oz (450g)

Produkt Specifikationer

Mærke: Vitek
Kategori: Ikke kategoriseret
Model: VTC-IRB424M

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VTC-IRB424M stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Vitek Manualer

Vitek

Vitek VTC-IRV30/2810 Manual

6 August 2025
Vitek

Vitek VTC-IRE40/3516 Manual

15 November 2024
Vitek

Vitek VTM-LCD155P Manual

7 Oktober 2024
Vitek

Vitek VTC-C594DN Manual

7 Oktober 2024
Vitek

Vitek VTC-T4T3HR2MD Manual

6 Oktober 2024
Vitek

Vitek VTC-THB5RV Manual

14 September 2024
Vitek

Vitek VTD-VH412VP4 Manual

13 September 2024
Vitek

Vitek VTC-C960WS Manual

9 September 2024
Vitek

Vitek VTC-TNB42R3F Manual

8 September 2024
Vitek

Vitek VTC-IRB424M Manual

8 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea

Ikea RAGGBERG 806.111.29 Manual

14 Oktober 2025
Ikea

Ikea SINARP 405.951.88 Manual

14 Oktober 2025
Ikea

Ikea VINTERFINT 006.045.33 Manual

14 Oktober 2025
Ikea

Ikea PÅLYCKE 505.344.01 Manual

14 Oktober 2025
Learning Resources

Learning Resources Who Knows Math? Manual

14 Oktober 2025
Ikea

Ikea SKÅDIS 903.471.72 Manual

14 Oktober 2025
MB Quart

MB Quart MBTAC-STG6A-20-23 Manual

14 Oktober 2025
Ikea

Ikea SITTBRUNN 605.959.84 Manual

14 Oktober 2025
Valcom

Valcom ezIP EZ-PC3 Manual

14 Oktober 2025
Proel

Proel AE300R1 Manual

14 Oktober 2025