Vitek VT-PIRC2 Manual

Vitek Ikke kategoriseret VT-PIRC2

Læs gratis den danske manual til Vitek VT-PIRC2 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Vitek VT-PIRC2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

VITEK

• Color CCD Image Sensor with 420 TV Lines (VT-PIRC2) /

550 TV Lines (VT-PIRC2/H)

• Minimum Illumination of 0.2 Lux / 0.5 Lux (VT-PIRC2/H)

• Pinhole 3.8mm / f2.0 Lens Included

• NC/C/NO Alarm Output

• Working 100’ Motion Detection Using 58 Beams Within 3

layers (35’ x 35’ Coverage Area)

VT-PIRC2

VT-PIRC2/H

Color PIR Cameras

PIR BOARD LAYOUT

1. LED: When an intrusion is detected, the LED will activate.

2. J2: Pulse count setting.

Relay will activate when an intrusion is detected once. (For stable 1-2 short (default):

environments or high risk operating environments)

Relay will activate when an intrusion is detected twice within 15 seconds.2-3 short:

(For harsh environments)

3. J1: Relay output select.

For outer control used in area where DC12V is requested (Limited at 200mA).Short:

N.C. = DC12V outNormal:

N.O. = DC12V outActivate:

Caution! Risk of electric shock. Set-up and operation should be

performed by authorized service person only.

Open (default): Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at

AC240V)

C & N.C. short / C & N.O. open.Normal:

C & N.C. open / C & N.O. short.Activate:

4. VR1: Sensitivity adjustment.

Turn clockwise for low sensitivity, turn counter-clockwise for high.

5. VR2: Relay activation time adjustment (range about 2 ~ 30 seconds).

Turn clockwise for short time, turn counter-clockwise for long.

6. NC/C/NO Wiring:

C: NO: NC: BLACK WHITE RED

7. J3: LED on/off

Open: LED off Short: LED on

CN1 Connector:

1. DC 12V IN

2. GND

3. AUDIO OUT (option)

4. GND

5. VIDEO OUT

6. RELAY C. (common)

7. RELAY N.O. (normal open)

8. RELAY N.C. (normal close)

CN2 Connector:

1. AUDIO IN (Not Available In US)

2. VIDEO IN (from CCD MODULE)

3. GND

4. DC 12V/500mA OUT (for CCD MODULE)

Produkt Specifikationer

Mærke:	Vitek
Kategori:	Ikke kategoriseret
Model:	VT-PIRC2

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VT-PIRC2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vitek Manualer

Vitek VTC-IRE40/3516 Manual

15 November 2024

Vitek VTM-LCD155P Manual

7 Oktober 2024

Vitek VTC-C594DN Manual

7 Oktober 2024

Vitek VTC-T4T3HR2MD Manual

6 Oktober 2024

Vitek VTC-THB5RV Manual

14 September 2024

Vitek VTD-VH412VP4 Manual

13 September 2024

Vitek VTC-C960WS Manual

9 September 2024

Vitek VTC-TNB42R3F Manual

8 September 2024

Vitek VTC-IRB424M Manual

8 September 2024

Vitek VT-PIRC2H Manual

7 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikan PT4500-TM-V3 Manual

9 Juli 2025

VOREL 74610 Manual

9 Juli 2025

Nokia E3110 Manual

9 Juli 2025

X-Sense XP0A-MR Manual

9 Juli 2025

Eton UG MB 195 L Manual

9 Juli 2025

Philips 42PFH5129 Manual

9 Juli 2025

Ikea PS 2017 806.080.18 Manual

9 Juli 2025

DB Technologies ASX 24 Manual

9 Juli 2025

Antelope Discrete 4 Pro Synergy Core Manual

9 Juli 2025

Philips 32PFL5578 Manual

9 Juli 2025