Vitek VTC-C2BTS2 Manual


Læs gratis den danske manual til Vitek VTC-C2BTS2 (28 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Vitek VTC-C2BTS2, eller vil du spørge andre brugere om produktet?

Side 1/28
FEATURES:
• 1/2.8” Sony® Exmor Progressive Scan CMOS Sensor
• 2.1 MegaPixel with Full 1080p/720p TVI Output
• Sensitivity of 0.0009 Lux
• Smart Motion Zoom tracks motion, then intelligently zooms into that area of
the frame
• 3D-DNR Digital Noise Reduction
• CVBS (Analog) Output by BNC
• True Day/Night by ICR - Dual Filter Switch
• Fully programmable True WDR (Dual Scan)
• Advanced OSD Functions: NORMAL, WDR, D-WDR, 3DNR, Motion Detection,
Privacy Mask, D-Zoom(~8x), Sens-up(x32), Flickerless, BLC/HLC, Defog,
Pixel Defect Compensation, Title Set, LSC, Deblur, Flip
• External control via RS-485
• Low active TTL input from External IR illuminators
• 12VDC / 24VAC Dual Voltage Operation
VTC-C2BTS2
2.1MP Smart TVI WDR
Box Camera
VITEK
VITEK
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
2


Produkt Specifikationer

Mærke: Vitek
Kategori: Ikke kategoriseret
Model: VTC-C2BTS2

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VTC-C2BTS2 stil et spørgsmål nedenfor, og andre brugere vil svare dig