Vitek VTC-C2NZ Manual


Læs gratis den danske manual til Vitek VTC-C2NZ (23 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Vitek VTC-C2NZ, eller vil du spørge andre brugere om produktet?

Side 1/23
VITEK
VTC-C2NZ
ENVI 2.1MP Auto-
Focus-Zoom IR Network
Camera
• 1/2.9” Sony CMOS
• 2.1 MegaPixel
• Up to 30fps live view @ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-C2NZ39) / 9-22mm
(VTC-C2NZ922) with Auto-Focus Motorized Optical Zoom
• H.264/MJPEG Dual Streaming
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-
Focus-Zoom by tracking motion, then optically zooming in
to that area of the frame
• Onvif Compliance
• Integrated Cooling Fan
• SD memory card slot for Local recording
• Mechanical IR Cut Filter (True Day/Night)
• Motion Activated Pointing Zoom, Defog, BLC/HLC, Motion
Deblur, Pixel Defect Compensation, Mirror, Flip, Pixel
Defect Compensation
• 12VDC/24VAC & PoE (Power over Ethernet) Operation
Specifications & installation procedure subject to
change without notice. Visit www.vitekcctv.com for
the most current information available.
Safety Precaution
01
NETWORK AF-ZOOM CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.


Produkt Specifikationer

Mærke: Vitek
Kategori: Ikke kategoriseret
Model: VTC-C2NZ

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VTC-C2NZ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vitek Manualer

Vitek

Vitek VTC-IRE40/3516 Manual

15 November 2024
Vitek

Vitek VTM-LCD155P Manual

7 Oktober 2024
Vitek

Vitek VTC-C594DN Manual

7 Oktober 2024
Vitek

Vitek VTC-THB5RV Manual

14 September 2024
Vitek

Vitek VTD-VH412VP4 Manual

13 September 2024
Vitek

Vitek VTC-C960WS Manual

9 September 2024
Vitek

Vitek VTC-TNB42R3F Manual

8 September 2024
Vitek

Vitek VTC-IRB424M Manual

8 September 2024
Vitek

Vitek VT-PIRC2H Manual

7 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer