Vitek VTC-IRA40 Manual


Læs gratis den danske manual til Vitek VTC-IRA40 (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Vitek VTC-IRA40, eller vil du spørge andre brugere om produktet?

Side 1/32
VITEK
VTC-IRA40/3516
750 TV Line Day/Night
IR Bullet Camera
w/150’ Range (960H)
1/3” High density Sony® CCD (960H)
High Resolution of 750 Horizontal Lines
Sony Effio-A Digital Signal Processor
Simple Installation with External Focus and Zoom control and one
turn mount positioning lock
True Day/Night by ICR (Infrared Cut Removal)
E-WDR by ATR-EX (Adaptive Tone Reproduction)
40 Infrared LEDs at 850nm enable viewing in total darkness up to
150 feet
0.003 Lux (Sens-up Off) / 0 Lux (IR-ON)
3.5-16mm Varifocal Auto Iris Lens with External Adjustments for
Focus and Zoom
True Day/Night by ICR - Infrared Cut Removal
XD-DNR (2D+3D DNR) Advanced Digital Noise Reduction
Built-in Motion Detection with a 24x16 Grid
OSD (On Screen Display) menu and Camera ID
Dual Glass Compartments to Eliminate Glare
IP68 NEMA Rating
Heavy Duty Mount with Cable Feed Through
Secondary Video Output & OSD Control Joystick are accessible
inside a gasket sealed removable side panel
24VAC/12VDC Dual Voltage
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
2


Produkt Specifikationer

Mærke: Vitek
Kategori: Ikke kategoriseret
Model: VTC-IRA40

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VTC-IRA40 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vitek Manualer

Vitek

Vitek VTC-IRE40/3516 Manual

15 November 2024
Vitek

Vitek VTM-LCD155P Manual

7 Oktober 2024
Vitek

Vitek VTC-C594DN Manual

7 Oktober 2024
Vitek

Vitek VTC-THB5RV Manual

14 September 2024
Vitek

Vitek VTD-VH412VP4 Manual

13 September 2024
Vitek

Vitek VTC-C960WS Manual

9 September 2024
Vitek

Vitek VTC-TNB42R3F Manual

8 September 2024
Vitek

Vitek VTC-IRB424M Manual

8 September 2024
Vitek

Vitek VT-PIRC2H Manual

7 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer