Vitek VTD-HOCMD2CH Manual

Vitek Overvågningskamera VTD-HOCMD2CH

Læs gratis den danske manual til Vitek VTD-HOCMD2CH (4 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vitek VTD-HOCMD2CH, eller vil du spørge andre brugere om produktet?

Side 1/4
VITEK
VTD-HOCMD2CH
HD-SDI Vandal Resistant
Mini Dome 2.1 Megapixel
FEATURES:
• 1/3” 2.1Megapixel CMOS Sensor
•1080(1920x1080)@30fps
• 3.6mm Fixed Lens Included
• 2D-DNR - Two Dimensional Motion Adaptive Noise
Reduction
• Can be Semi-Flush or Surface Mounted
• IP-66 Rated Weather Resistant Aluminum Enclosure w/
Polished Chrome Finish
• 12VDC Operation
1
INSTALLATION
1) Align the camera unit with the
surface of the ceiling, make marks
on the ceiling in the places where
the screw holes are to be drilled,
and then drill the three holes.
2) Cut a hole (diameter:50mm) in the
ceiling for routing the cables.
3) Pass the power cable (B) and video
cable (A) from the camera unit
through the cable hole in the ceiling.
4) Align the three screw holes in the
camera unit (C) with the screw holes
in the ceiling, and then secure the
camera in place by tightening the
three tapping screws.
5) Use the supplied four screws (E) to
secure the middle base (D) to the
bottom base (C)
6) Tighten the guide ring (G), then
adjustment the camera (F).
7) Attach the bubble (H) to the middle
base (D).
8) Attach the top cover (I) to the middle
base (D).
9) Use the supplied star-shaded
L-wrench to tighten the set screw on
the top cover.
Open Close


Produkt Specifikationer

Mærke: Vitek
Kategori: Overvågningskamera
Model: VTD-HOCMD2CH

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VTD-HOCMD2CH stil et spørgsmål nedenfor, og andre brugere vil svare dig




Overvågningskamera Vitek Manualer

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer