Vitek VTD-MD5CH Manual


Læs gratis den danske manual til Vitek VTD-MD5CH (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Vitek VTD-MD5CH, eller vil du spørge andre brugere om produktet?

Side 1/4
VITEK
VTD-MD5CH
Vandal Resistant Mini Dome
Camera
FEATURES:
1/3” Sony Super Had CCD
550 TV Lines of Resolution
3.6mm Fixed Lens Included
Minimum Illumination of 0.3 Lux
Can be Semi-Flush or Surface Mounted
IP-66 Rated Vandal Resistant Aluminum Enclosure with
Polished Chrome Finish
12VDC Operation
1
INSTALLATION
B
C
D
F
G
H E
I
J
A
1) Align the camera unit with the
surface of the ceiling, make marks
on the ceiling in the places where
the screw holes are to be drilled,
and then drill the three holes.
2) Cut a hole (diameter:50mm) in the
ceiling for routing the cables.
3) Pass the power cable (H) and
video cable (I) from the camera unit
through the cable hole in the ceiling.
4) Align the three screw holes in the
camera unit (G) with the screw holes
in the ceiling, and then secure the
camera in place by tightening the
three tapping screws(J).
5) Use the supplied the four screws(F)
to secure the middle base(F) to the
bottom base(G)
6) Tighten the guide ring(C), then
adjustment the camera(D).
7) Attach the bubble(B) to the middle
base(E).
8) Attach the top cover(A) to the middle
base(E).
9) Use the supplied star-shaded L-
wrench to tighten the set screw on
the top cover.
Open Close


Produkt Specifikationer

Mærke: Vitek
Kategori: Ikke kategoriseret
Model: VTD-MD5CH

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VTD-MD5CH stil et spørgsmål nedenfor, og andre brugere vil svare dig