Vivanco PRO UR 3 TTP Manual

Vivanco Fjernbetjening PRO UR 3 TTP

Læs gratis den danske manual til Vivanco PRO UR 3 TTP (27 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Vivanco PRO UR 3 TTP, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/27
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail: 1hotline@vivanco.de
Universal Controllers
PRO UR 3 TTP (3in1)
(GB) Instructions for
Universal remote control
To control almost all TV sets, satellite receivers, DTT set top
boxes, DVD players and recorders, CD players and other
infrared-controllable devices.
1 Important – please read
The Vivanco PRO UR ...is pre-programmed to control up to
3 devices, replacing damaged or lost original remote
controls. It controls the basic functions of the devices for
which it has been set and is not designed to replace all the
functions of the original remote controls. In order to be able
to control your devices, you must set the remote control as
described in the section "Code entry".
2 Battery Replacement
Open the battery compartment on the underside of the PRO
UR . To do so, lightly press the locking mechanism (left side
of battery drawer) of the battery compartment upwards, then
ireplace the CR 2032 lithium cell. Make sure that the polarity
is correct. To check functionality, press the button. If PWR
everything is correct the red lamp flickers when the button is
pressed.
3 Code entry
The correct control codes can be set via direct code entry or
automatic code search.
Direct code entry
Using the enclosed code list, note the possible codes for the
device and the brand.
To set your TV set, proceed as follows:
1. Using the enclosed code list, find the codes to
control your brand of television (TV). It is
possible that there are several suitable codes
and you should find out the most suitable.
2. Switch on a program on your TV.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail: 2hotline@vivanco.de
3. Press the button, hold it down and at the SET
same time press a device button, e.g. , until TV
the red lamp comes on.
4. Then enter one of selected three-digit codes
5. When the first and second number buttons are
pressed the lamp goes out briefly; when the third
is pressed it stays out.
6. Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 5 for other devices. If it is not okay, try
another code for the same brand.
The letters on the device buttons are for your TV, SAT, AUX
orientation only. You can set each type of device under any
of the buttons.
If you do not find a suitable code for a device, look for it
using the code search.
Code search
To control a TV:
1. Switch on a program on your TV (on the TV
itself or with the original remote control).
2. Press the button, hold it down and at the SET
same time press a device button, e.g. , until TV
the red lamp comes on.
3. Then press the button again briefly, the SET
lamp starts to blink.
4. Press the button approx. every 2 seconds. PWR
5. When the TV switches itself off, briefly press the
device button ( ) to store the code found. TV
6. The lamp goes out and the search is ended.
7. Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 6 for other devices. Then press the device
buttons , or instead of . If it is not SAT AUX TV*)
okay, continue searching as described in 1 to 6.
Automatic code search
To control a TV:
1. Switch on a program on your TV (on the TV
itself or with the original remote control).

Produkt Specifikationer

Mærke: Vivanco
Kategori: Fjernbetjening
Model: PRO UR 3 TTP

Har du brug for hjælp?

Hvis du har brug for hjælp til Vivanco PRO UR 3 TTP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Vivanco Manualer

Vivanco

Vivanco vivcontrol 5 se Manual

26 August 2024
Vivanco

Vivanco UR12NB Manual

26 August 2024
Vivanco

Vivanco vivcontrol 3 se Manual

26 August 2024
Vivanco

Vivanco UR 1200 Manual

17 August 2024
Vivanco

Vivanco 37600 Manual

16 August 2024
Vivanco

Vivanco Viv.Control 3 Manual

15 August 2024
Vivanco

Vivanco UR 1250 Manual

15 August 2024
Vivanco

Vivanco UR ZAP2 Manual

14 August 2024
Vivanco

Vivanco UR Z2 Manual

14 August 2024
Vivanco

Vivanco UR S2 Manual

14 August 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Savio

Savio RC-23 Manual

7 Juni 2025
Sony

Sony RM-BR300 Manual

6 Juni 2025
Philips

Philips Prestigo SRU6006 Manual

4 Juni 2025
GBS

GBS All For You Manual

4 Juni 2025
Sony

Sony RM-AV2 Manual

3 Juni 2025
Rockford Fosgate

Rockford Fosgate Punch PEQ Manual

1 Juni 2025
Autel

Autel Smart Controller SE Manual

27 Marts 2025
Metronic

Metronic Zap 2 495383 Manual

26 Marts 2025
Ikea

Ikea RODRET 405.597.98 Manual

13 Marts 2025
GE

GE 24959 Manual

10 Marts 2025