Vivanco UR 44 Manual

Vivanco Fjernbetjening UR 44

Læs gratis den danske manual til Vivanco UR 44 (19 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Vivanco UR 44, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)

4102231235, Fax: +49(0)4102 31444, e-Mail: 1hotline@vivanco.de

UR 44+4 Universal Controller

(GB) Instructions

UR 44+4 Universal remote control

To control almost all TV sets, satellite receivers, DVD

players and recorders, CD players and other infrared-

controllable devices.

1 Important – please read

The Vivanco UR 44+4 is pre-programmed to control up to 8

devices, replacing damaged or lost original remote controls.

It controls the basic functions of the devices for which it has

been set and is not designed to replace all the functions of

the original remote controls. In order to be able to control

your devices, you must set the remote control as described

in the section "Code entry".

2 Inserting batteries

Open the battery compartment on the underside of the UR

44+4. To do so, lightly press the locking mechanism of the

battery compartment upwards, then insert 2 new AAA

alkaline batteries. Make sure that the polarity is correct: the

"+" and "-" markings on the batteries and in the

compartment must match. To check functionality, press the

PWR button. If everything is correct the red lamp flickers

when the button is pressed.

3 Code entry

The correct control codes can be set via direct code entry or

automatic code search.

Direct code entry

Using the enclosed code list, note the possible codes for the

device and the brand.

To set your TV set, proceed as follows:

1. Using the enclosed code list, find the codes to

control your brand of television (TV). It is

Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)

4102231235, Fax: +49(0)4102 31444, e-Mail: 2hotline@vivanco.de

possible that there are several suitable codes

and you should find out the most suitable.

2. Switch on a program on your TV.

3. Press the button, hold it down and at theSET

same time press a device button, e.g. , untilTV*)

the red lamp comes on.

4. Then enter one of selected three-digit codes.

Key 0: please press key 10.

5. When the first and second number buttons are

pressed the lamp goes out briefly; when the third

is pressed it stays out.

6. Try out the functions. If everything is okay, you

can set the remote control as described in steps

1 to 5 for other devices. If it is not okay, try

another code for the same brand.

The letters on the device buttons TV1/TV2*), SAT1/SAT2*),

DVD1/DVD2*), VCR1/VCR2*) are for your orientation only.

You can set each type of device under any of the buttons.

If you do not find a suitable code for a device, look for it

using the code search.

*): All 4 keys of the device can be assigned twice so that 8

different devices can be controlled altogether. If you press a

key once according to these instructions you can enter a

device code for the first assignment or control the first

device. If you press a key twice within one second you can

set the key for a second device, or control a second device

via the key.

Code search

To control a TV:

1. Switch on a program on your TV (on the TV

itself or with the original remote control).

2. Press the button, hold it down and at theSET

same time press a device button, e.g. , untilTV*)

the red lamp comes on.

3. Then press the button again briefly, theSET

lamp starts to blink.

Produkt Specifikationer

Mærke:	Vivanco
Kategori:	Fjernbetjening
Model:	UR 44
Vægt:	- g
Produktfarve:	Sort, sølv
Indbygget skærm:	Ingen
Batteriteknologi:	Alkaline
Batteritype:	AAA
Antal understøttede batterier:	2
Fjernbetjening korrekt brug:	DVD/Blu-ray,SAT,TV
Indgangstype:	Tryk på knapper
Maks. rækkevidde:	- m
Antal understøttede enheder:	4
Genopladelig:	Ingen