VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
| | |T: +886-2-82455282 F: +886-2-82455532 E: sales@vivotek.com
VIVOTEK USA, INC.
 2050 Ringwood Avenue, San Jose, CA 95131
| | |T:  408-773-8686 F:  408-773-8298 E:  salesusa@vivotek.com 
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T E: +31(0)36-5298-434  : saleseurope@vivotek.com
100m 100m
48W consumpon
Speed Dome
95W PoE Injector
AP-FXC-0160
PoE IN Green ON LAN: Data is being transmitted or received.
Yellow ON PWR: PoE IN port is connected to PSE. 
OFF No connection. 
Power OUT# Green ON LAN: Data is being transmitted or received.
Yellow ON PWR: PoE OUT port is connected to PD. 
OFF No connection. 
1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust. 
2. Make sure the ventilation openings on the extender are not blocked. 
3. Use CAT5 or 6 UTP/STP cables.  Avoid using low-quality cables, which will seriously limit the cabling distance. 
AP-FXC-0160, AP-FXC-0260 Outdoor PoE Extender 
Quick Installation Guide
AP-FXC-0160: 1 PoE IN - to - 1 PoE OUT.
AP-FXC-0260: 1 PoE IN - to - 2 PoE OUT. 
The AP-FXC-0160/0260 is a PoE extender capable of receiving 95W power from PSE. Multiple extenders can be 
cascaded to increase the cabling distance. 
IMPORTANT: 
INTRODUCTION
LED DEFINITIONS
CONNECTION
• •1x PoE extender 1x Quick Installation Guide
PACKAGE CONTENTS
Allspecicationsaresubjecttochangewithoutnoice.
Copyright © 2017 VIVOTEK INC. All rights reserved. 
Following are the conditions for making the cabling: 
1.Use18~19Ω,24AWGCAT5cables.
2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
    Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch. 
NOTE: There are power losses due to cable resistance.  
100m 100m100m
95W PoE Injector 802.3af PoE Camera
PoE CameraPoE Camera 802.3af802.3at
AP-FXC-0260 AP-FXC-0260
DIP# ON Turn on PoE output for the PoE out port. 
OFF Turn off PoE output for the PoE out port. 
DIP SWITCH DEFINITIONS