Vivotek AW-IHS-0202 Manual

Vivotek Ikke kategoriseret AW-IHS-0202

Læs gratis den danske manual til Vivotek AW-IHS-0202 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Vivotek AW-IHS-0202, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

LC - or -SC

POWER Green ON Power is on and normal.

Fiber

Link/Act

Green ON Fiber is attached.

Green Flashing Data is being transmitted / received.

LAN port

Green

Green ON TX link is detected.

Green Flashing Data is being transmitted or received.

LAN port

Amber

Amber ON 100M speed is detected.

Amber OFF 10M speed is detected.

1. Install the converter in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the converter are not blocked.

3. Use ber optic cables and transceiver compliant with the following: Multi-mode: 50/125um, 62.5/125um, 850nm;

Single-mode): 9/125um ,1310nm.

4. AC input (18~36V/AC, 50~60Hz), DC input (12V~60VDC). Follow the printed polarity for V+, V-, and Ground.

AW-IHS-0200 Industrial Media Converter

AW-IHS-0201

AW-IHS-0202

Quick Installation Guide

The AW-IHS-0200 series is a rugged media converter designed for critical and space-limited outdoor applications.

Designed for IP surveillance, trafc monitoring, and security applications in critical environments, the converter features a

wide range of VAC and VDC input range, and an operating temperature ranging from -40°C to 75°C.

IMPORTANT:

INTRODUCTION

LED DEFINITIONS

CONNECTION

* 1x media converter * 1x Quick Installation Guide

* 2x wall mount brackets * 1x DIN rail bracket

* 1x 3-pin terminal block

PACKAGE CONTENTS

1. Pull out the 3-pin terminal block.

2. Connect wires to V+, V-, and Ground.

3. Connect SFP transceiver or SC ber to the ber port.

4. install the 3-pin terminal block.

WARNING - Do not force SFP transceiver into the SFP

socket without removing the terminal block.

OFF

DIP 1 ON Converter mode

OFF Switch mode (default)

DIP 2 ON LFP enabled

OFF LFP disabled (default)

Converter w/ SC type connectors

for Multi-mode 2KM and single-mode 30KM

Converter w/ LC type socket

for Multi-mode 2KM and single-mode 30KM

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

| | |T: +886-2-82455282 F: +886-2-82455532 E: sa les@vivotek.com

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

| | |T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

VIVOTEK Netherlands B.V.

Busplein 36, 1315KV, Almere, The Netherlands

| | |T: +31 (0)36 5389 149 F: +31 (0)36 5389 111 E: sa leseurope@vivot ek.com

All specications are subject to change without noice.

Produkt Specifikationer

Mærke:	Vivotek
Kategori:	Ikke kategoriseret
Model:	AW-IHS-0202
Kode for international beskyttelse (IP):	IP40
Bredde:	49 mm
Dybde:	59 mm
Højde:	36 mm
Vægt:	80 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Strømforbrug (typisk):	2 W
Driftstemperatur (T-T):	-40 - 75 °C
Husmateriale:	Aluminium
Certificering:	CE, C-Tick, FCC, VCCI, LVD
Netværksstandarder:	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	LAN, Power, Speed
Kan monteres på væggen:	Ja
DC indgangsspænding:	18 - 36 V
Fiber optisk strømstik:	SFP
Strøm over Ethernet (PoE):	Ingen
Auto MDI/MDI-X:	Ja
Kobber ethernet kabelteknologi:	10BASE-T, 100BASE-TX
Basis omskiftning RJ-45 Ethernet porte, antal:	1
Basis omskiftning RJ-45 Ethernet porttype:	Fast Ethernet (10/100)
Opbevar-og-frem:	Ja
MAC adresselabel:	1000 entries
Switch kapacitet:	- Gbit/sek.
Bufferstørrelse:	128 KB
DIN-skinne montering:	Ja
Monteringssæt til væggen:	Ja
Klemrække inkluderet:	Ja
DIN skinne inkluderet:	Ja
Understøttede kabeltyper:	Cat3, Cat4, Cat5, Cat5e
Fiberkanal porte:	1
Pakke videresendelsesrate (100 Mbps):	148000 pps
Pakke videresendelsesrate (10 Mbps):	14880 pps