VIZIO S3821w-CNA Manual
VIZIO
Audio/video konverter
S3821w-CNA
Læs nedenfor 📖 manual på dansk for VIZIO S3821w-CNA (48 sider) i kategorien Audio/video konverter. Denne guide var nyttig for 48 personer og blev bedømt med 4.3 stjerner i gennemsnit af 24.5 brugere
Side 1/48
QUICK START GUIDE
Model: S3821w-C0NA
VIZIO
• Do not overload power strips and extension cords. Overloading can result in fire or electric
shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit,
unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your Unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
Continued use of your Unit may cause fire or electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with
heavy dust or high humidity may cause fire or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time,
unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to
leak which can damage the remote control or injure the operator.
• See the important note and rating located on the back of the unit.
• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled
with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.
• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed.
Do not disassemble the batteries or dispose of it in fire.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Explanation of WARNING symbols:
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to
constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and servicing instructions in the literature accompanying the appliance.
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use,
and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions
in a safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other
components to your Unit.
• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a
spray cleaner on your Unit. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do
not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the
top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.
• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug
the power cord.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PACKAGE CONTENTS
This Quick
Start Guide
Remote Control
with Batteries
High Definition Sound Bar with
wireless Subwoofer
Digital Optical
Cable
Stereo RCA to 3.5mm
Audio Cable
Coaxial Audio
Cable
2 x Power
Cable
2 x Sound Bar Wall
Mount Bracket
Wall Mount
Template
2 x Wall
Mount Screw
(Size: M4 x 10)
CONTROLS & CONNECTIONS
Back of Sound Bar
Power Port
USB (6)
USB In
OPTICAL (4)
Digital Optical Audio In
DIGITAL (3)
Coaxial In
AUX (1)
Analog Audio In
AUX (2)
Analog Audio In
Service Port
Pairing
Button
Control Buttons are located here:
Back of Sound Bar
Input
Power
Volume
+
-
Bluetooth Input
(Hold to force pair, See ‘Bluetooth Pairing’ for more information)
FIRST-TIME SETUP
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly
to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
AND CONNECT IT TO YOUR TV
CHOOSE CABLE:ONE
BETTER
GOOD
GOOD GOOD BETTERBETTER
3.5MM TO
RCA CABLE
3.5MM TO
RCA CABLE
DIGITAL COAXIAL
CABLE**
DIGITAL OPTICAL
CABLE**
**When using either of the Digital Inputs, if there is no audio: (A) try setting the TV
output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not
pass through digital audio.
Back of Sound Bar
2
Connect the Power Cable to
the Sound Bar.
Plug the Power Cable into
a power outlet.
1
PAIRING
AC IN
ON / OFF
BACK OF SUBWOOFER
AC IN
3
4
ON / OFF
5
Connect a Power Cable
to the Subwoofer.
Plug the Power Cable into
a power outlet.
Flip the Power Switch into
the On position.
For the best surround sound experience, position the Sound Bar and Subwoofer as shown.
The Sound Bar should be close to ear level. The Subwoofer should be placed in a corner of the room.
Sound Bar is centered
below the TV.
6
7
Remove the battery cover
by gently sliding it away
from the remote.
8
Insert the included batteries
and gently slide the battery
cover back into place.
9Turn your TV on, then press the button Power
on the remote to turn the Sound Bar on.
Press the button to switch between Input
audio sources. For example, if you
connected your TV to Input 1, set the Sound
Bar to Input 1.
Hardware setup is complete.
Power
Input
Top Top
Volume +
Press to increase volume.
Volume –
Press to decrease volume.
USING THE REMOTE
Previous
Press to return to previous track.
(Changes Treble and Bass levels)
Power
Press to turn on or off.
Mute
Press to mute/unmute.
Input
Press to change input source.
Enter/Play/Pause
Press to select an option.
Press to play or pause.
Next
Press to skip to the next track.
(Changes Treble and Bass levels)
Treble
Press to enter treble adjustment mode.
Bass
Press to enter bass adjustment mode.
TruVolume
Press to enable/disable
DTS TruVolume.
TruSurround HD
Press to enable/disable
DTS TruSurround HD.
Bluetooth
Press to enter Bluetooth input.
(To enter force pair mode, press and hold for 5 seconds)
LED Indicators are located here:
The LED Indicators will behave differently with each button on the remote control.
LED INDICATORS
Function LED Behavior Description
Input
Press the button on the remote to cycle through each available input: INPUT
• Analog Audio In - AUX (1)
• Analog Audio In - AUX (2)
• Coaxial In- Digital (3)
• Digital Optical Audio In - Optical (4)
• Bluetooth
• USB Device - USB (6)
Bluetooth Pairing
(When searching for device)
Flash from Left to Right
and back continuously.
Press and hold the button on the remote. The Sound Bar will be discoverable for 15
minutes. You can now search for the Sound Bar (VIZIO S3821w) using your Bluetooth Device.
The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
DTS TruVolume
On/Off
TruVolume On:
TruVolume Off:
Press the button to enable/disable TruVolume. When enabled (On), TruVolume TVOL
provides a consistent and comfortable volume level for a more enjoyable listening
experience.
DTS TruSurround
On/Off
TruSurround On:
TruSurround Off:
Press the button to enable/disable DTS TruSurround. When enabled (On), all inputs will TSHD
produce virtual surround sound. When disabled (Off), all sources will playback in 2.1 stereo.
Treble Levels
Two center LEDs indicate
Treble level 0.
Press the button then press the TREBLE Next/Previous button to increase/decrease the
treble level. The LED indicators will move to the right with increasing levels and to the left with
decreasing levels.
Bass Levels
Two center LEDs indicate
Bass level 0.
Press the button then press the BASS Next/Previous button to increase/decrease the bass
level. The LED indicators will move to the right with increasing levels and to the left with
decreasing levels.
Analog Audio In - AUX (1)
Analog Audio In - AUX (2)
Coaxial In - Digital (3)
Digital Optical Audio In -
Optical (4)
USB Device - USB (6)
Bluetooth
RE-LINKING THE SUBWOOFER WITH SOUND BAR
Your Subwoofer has already been paired with your
Sound Bar by VIZIO. However, you may need to pair
the Subwoofer to the Sound Bar if there is no sound
coming from the Subwoofer.
When the green LED on both the Sound Bar and
Subwoofer are lit, the two are paired. A slow blink
means the two are not paired.
PA
AC IN
ON / O FF
PAIRING
PAIRING
AC IN
1
First confirm that the power switch is in the position.ON
Press and hold the button on the back of the Pairing
Subwoofer for 5 seconds. The LED on the back of the
Subwoofer will blink rapidly.
2
Turn on the Sound Bar. Press and hold the Pairing button
on the back of the Sound Bar for 5 Seconds. The LED on
the back of the Sound Bar will blink rapidly. When the
green LED on both the Sound Bar and Subwoofer are lit,
the two are paired.
Back of Subwoofer
Back of Sound Bar
What does pairing mean?
Pairing means to wirelessly connect.
BLUETOOTH PAIRING
Back of Sound Bar
To pair the Sound Bar with a Bluetooth device:
1. Press and hold the button on the Sound Bar or the button Bluetooth Bluetooth on the remote for five (5)
seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the
Sound Bar will light sequentially from left to right and back again.
Once the device is paired, the LED Indicators will stop flashing.
2. You can now search for the Sound Bar (VIZIO S3821w) using your Bluetooth device. For more information, see the
documentation that came with your device.
3. Play audio from your Bluetooth device. Volume can be controlled on your source device and
the Sound Bar.
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability.
Device compatibility will vary, see your device’s documentation for more information. Once you have paired your
source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain
paired, even if you change the input on the Sound Bar.
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so
streamed music may lose some integrity when compared to a wired connection.
Try the following if your sound quality is less than optimal:
• If you hear any break-up or disconnect while streaming music from your device, move the source device
closer to the Sound Bar.
• Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source
device.
• Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video
baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve
Bluetooth range.
Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free
device for a smartphone.
Reduce the volume levels on your device and on the Sound Bar before pressing . High volume Play
levels can damage your hearing.
ADVANCED SETUP
DIGITAL OPTICAL
CABLE
Connect up to five (5) different devices
to the Sound Bar (devices shown are
examples you can use any device).
To listen to a device, change the input
source on the Sound Bar.
Optical, Coaxial, and 3.5mm cables
transmit audio only. If connecting a
video device, you will need a separate
video connection from the device to
your TV.
Game Console Network Media Player Tablet/MP3 Player/Laptop
USB
THUMB DRIVE*
3.5mm AUDIO
CABLE
DIGITAL COAXIAL
CABLE
RCA AUDIO
CABLE
*Supports .WAV file format playback only
Back of Sound Bar
WALL MOUNTING THE SOUND BAR
Back of Sound Bar
Wall-Mount
Screw Holes
Insert and tighten two Wall-Mount Screws with a Phillips-head
screwdriver into the Wall-Mount Screw Holes.
1
2
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls). Wall
mounting hardware is not included.
If you are unfamiliar with power tools or the layout of
electrical wiring in the walls of your home, consult a
professional installer.
22.5 in
(571.5 mm)
Wall Mount Screw
Screw Size: M4 x 10
3
There is no power.
• Press the button on the remote control or on the top of your Sound Bar.POWER
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
There is no sound.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing or
humming.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Bar.
The remote
isn’t working.
• Replace the remote batteries with new ones.
• Point the remote directly at the center of the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application. (e.g., Pandora doesn’t support the Back button.)
HELP & TROUBLESHOOTING
Available at www.VIZIO.com This Product Sold Separately
Introducing the new E-series slim frame design. The VIZIO E-series LED TV is shattering the mold in a
way only VIZIO can, with high-quality design and picture at the best value. With a stunningly slim outer
frame design – and LED with 1080p Full HD for rich colors and vivid details, this HDTV gives you the best
picture at the best value.
VIZIO RECOMMENDS
Available at www.VIZIO.com This Product Sold Separately
The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience,
turning any HDTV into the ultimate smart TV. Using the latest version of Google TV™, Co-Star decks out
your existing HDTV with apps, full-screen Web browsing and the best in streaming entertainment. And
with 1080p Full HD resolution, built-in Wi-Fi, and 3D-readiness, VIZIO Co-Star is the ultimate entertainment
upgrade for any high-definition television.
VIZIO RECOMMENDS
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90)
days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option
and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through
Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts
and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return
shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support
will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper
operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation
and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine
maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABIL-
ITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE
OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.
ONE-YEAR LIMITED WARRANTY
Sound Bar: 2 x 3” High-Efficiency Full-Range Transducers
Subwoofer: 1 x 6” High-Excursion (Long throw) Transducer
Inputs: 1 x 3.5mm Stereo Audio
1 x RCA Stereo Audio
1 x Optical (Toslink)
1 x Digital Coaxial Audio
1 x USB (WAV playback only)
Bluetooth (Wireless)
Sound Pressure Level (System): 100 dB
Frequency Response (System): 50 Hz - 19 KHz
Voltage: 120 VAC, 60 Hz
Compliances: UL, C-UL, FCC
SPECIFICATIONS
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct
such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
Other:
Image(s) used under license from Shutterstock.com
LEGAL & COMPLIANCE
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks,
and DTS TruSurround is a trademark of DTS, Inc. DTS, Inc. All
Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks,
and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
This product qualifies for ENERGY STAR in the “factory
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
settings or enabling other features will increase power
consumption that could exceed the limits necessary to
qualify for ENERGY STAR rating.
We want to help you save energy.
GUIDE DE DÉMARRAGE RAPIDE
Modèle: S3821w-C0NA
VIZIO
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
• Une fois branchée sur une prise d’alimentation, l’alimentation circule toujours vers votre unité. Pour déconnecter
entièrement l’alimentation, débrancher le cordon d’alimentation.
•Ne pas surcharger les barres d’alimentation et les cordons d’extension. Un surchargement peut provoquer
un incendie ou un choc électrique.
• La prise murale doit être située près de votre unité et être facilement accessible.
• Garder l’unité loin de l’humidité. Ne pas exposer l’unité à la pluie ou à l’humidité. Si de l’eau pénètre dans
l’unité, débrancher le cordon d’alimentation et contacter votre vendeur. Dans ce cas, une utilisation continue
pourrait causer un incendie ou un choc électrique.
• Ne pas utiliser l’unité si une anomalie survient. Si une fumée ou une odeur apparaît, débrancher le cordon
d’alimentation et contacter votre vendeur immédiatement. Ne pas tenter de réparer vous-même l’unité.
• Éviter d’utiliser des appareils endommagés ou laissés tomber. Si l’unité est laissée tomber par terre et que la
structure est endommagée, les composants internes fonctionneront peut-être anormalement. Débrancher le
cordon d’alimentation immédiatement et contacter votre vendeur pour une réparation. L’emploi continu de
votre unité peut engendrer un incendie ou un choc électrique.
•Ne pas installer l’unité dans un lieu contenant beaucoup de poussière ou une grande humidité. Le
fonctionnement de l’unité dans de tels environnements peut provoquer un incendie ou un choc électrique.
• Assurez-vous que le cordon d’alimentation et tout autre câble sont débranchés avant de déplacer votre unité.
• Lorsque vous débranchez votre unité, tenez la prise d’alimentation et pas le cordon. Tirer sur le cordon
d’alimentation peut endommager les fils à l’intérieur du cordon et provoquer un incendie ou un choc
électrique. Lorsque l’unité ne servira pas pendant une longue période de temps, débrancher le cordon
d’alimentation.
• Pour réduire le risque de choc électrique, ne pas toucher le connecteur avec des mains humides.
• Insérer les piles de la télécommande en suivant les instructions. Une mauvaise polarité peut causer une fuite de
la pile, endommageant peut-être la télécommande ou blessant l’utilisateur.
• Un avis important sur la classification se trouve à l’arrière de l’unité.
• AVERTISSEMENT : cet équipement n’est pas imperméable. Afin de prévenir tout risque d’incendie ou
d’électrocution, ne placez pas de conteneur rempli de liquide près de l’équipement (tels qu’un vase ou un pot
à fleurs) et n’exposez pas l’équipement près des égouttements,des éclaboussures, de la pluie ou de l’humidité.
• ATTENTION: risque d’explosion ou d’incendie si les piles ne sont pas utilisées correctement. Remplacer les piles
avec le même type ou un type spécifié.
• Ne pas laisser les piles exposées au soleil direct pour une période prolongée avec les portes et fenêtres fermées.
Ne pas démonter les piles ou les éliminer dans le feu.
AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, n’exposez pas cet appareil à la
pluie ou à l’humidité.
Explication des symboles d’AVERTISSEMENT:
Le symbole de l’éclair fléché à l’intérieur d’un triangle équilatéral a pour but d’avertir l’utilisateur de
la présence d’une tension dangereuse non isolée dans le produit, qui peut être d’une magnitude
suffisante pour constituer un risque de choc électrique aux personnes.
Le point d’exclamation à l’intérieur d’un triangle équilatéral a pour objectif d’avertir l’utilisateur que
des instructions importantes sur l’utilisation et l’entretien se trouvent dans les documents de votre
appareil.
Votre unité est conçue et fabriquée pour fonctionner dans les limites de conception définies, et une mauvaise
utilisation peut entraîner un choc électrique ou un incendie. Pour éviter d’endommager votre unité, vous devez
respecter les règles suivantes pour l’installation, l’utilisation et l’entretien. Veuillez lire les instructions de sécurité
suivantes avant de faire fonctionner votre unité. Conservez ces instructions dans un lieu sûr en vue d’une future
référence.
• Lire ces instructions.
• Conserver ces instructions.
• Tenir compte de toutes les mises en garde.
• Observer toutes les instructions.
• Ne pas utiliser cet appareil près de l’eau.
• Nettoyer à l’aide d’un chiffon sec seulement.
• Ne pas bloquer aucun orifice d’aération. Installer conformément aux instructions du fabricant.
• Ne pas installer près d’une source de chaleur, notamment un radiateur, une bouche de chaleur, un poêle, ou
tout autre appareil (incluant les amplificateurs) produisant de la chaleur.
• Ne pas aller à l’encontre du but de sécurité de la prise mise à la terre ou de la fiche polarisée. Une prise
polarisée est composée de deux fiches don’t l’une est plus large que l’autre. Une fiche de terre comporte deux
lames et une troisième broche de mise à la terre. La lame large ou la troisième broche sont fournies pour votre
sécurité. Si la fiche ne correspond pas à votre prise de courant, consultez un électricien pour qu’il remplace la
prise de courant désuete.
• Protéger le cordon d’alimentation afin qu’on ne marche pas dessus ou qu’on ne le compresse pas,
particulièrement près des prises de courant et de l’endroit d’où elle sort de l’appareil.
• Utiliser seulement du matériel ou des accessoires spécifiés par le fabricant.
• Faire seulement usage du chariot, du support, du trépied, de la fixation ou de la table
indiqué par le fabricant, ou vendu avec l’appareil. Lorsqu’un chariot est utilisé, faire
attention en déplaçant le chariot et l’appareil ensemble afin d’éviter les blessures
causées par un basculement.
• Débrancher l’appareil en cas d’orage électrique ou quand il n’est pas utilisé pendant de longues périodes de
temps.
• Consulter un technicien qualifié pour tout entretien. Un entretien courant est nécessaire lorsque l’appareil a
été endommagé de quelque façon que ce soit, notamment lorsque le cordon d’alimentation ou la fiche
d’alimentation est endommagé, lorsque du liquide a été renversé dans l’appareil ou des objets sont tombés
dedans, lorsque l’appareil a été exposé à la pluie ou à l’humidité, lorsque qu’il ne fontionne pas normalement
ou qu’il a été échappé.
•Pour réduire le risque de choc électrique ou de dommage à une composante, fermer l’alimentation avant de
connecter d’autres cosmposants à votre unité.
• Débrancher le cordon d’alimentation avant de nettoyer votre unité. Un linge humide suffit pour le nettoyage.
N’utilisez pas de nettoyants liquides ou en aérosol sur votre unité. Ne pas utiliser de nettoyants abrasifs.
• Toujours se servir des accessoires recommandés par le fabricant pour garantir la compatibilité.
• Lors du déplacement de votre unité depuis un lieu à basse température vers un lieu à haute température, de
la condensation peut se former dans la structure. Attendre avant d’allumer l’unité pour éviter de causer un
incendie, un choc électrique ou un dommage aux composants.
• Les fentes et les ouvertures au dos et au bas du caisson sont destinées à la ventilation. Pour garantir un
fonctionnement fiable de votre unité et pour la protéger d’un surchauffement, s’assurer que ces ouvertures ne
sont ni bloquées, ni couvertes. Ne pas placer l’unité dans une bibliothèque ou une armoire à moins qu’il y ait
une ventilation adéquate.
• Ne poussez jamais d’objets dans les fentes et les ouvertures de la structure de votre unité. Ne placez pas
d’objets sur le dessus de votre unité. Cela pourrait provoquer un court-circuit des pièces, engendrant ainsi un
incendie ou un choc électrique. Ne jamais renverser de liquide sur votre unité.
MISE EN GARDE
RISQUE DE CHOC ÉLECT RIQUE
NE PAS OUVRIR
CONTENU DU PAQUET
Ce guide de
démarrage
rapide
Télécommande
avec piles
Barre de son haute définition avec
caisson de basse sans fils
Câble optique
numérique
Câble audio stéréo RCA
pour prise de 3,5 mm
Câble audio
coaxial
2 x Câble
d’alimentation
2 supports pour
montage mural de la
barre de son
Modèle de
support mural
2 vis pour
montage mural
(taille: M4 x 10)
Produkt Specifikationer
| Mærke: | VIZIO |
| Kategori: | Audio/video konverter |
| Model: | S3821w-CNA |
Har du brug for hjælp?
Hvis du har brug for hjælp til VIZIO S3821w-CNA stil et spørgsmål nedenfor, og andre brugere vil svare dig
Audio/video konverter VIZIO Manualer
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
Audio/video konverter Manualer
- Audio/video konverter TechLogix Networx
- Audio/video konverter C2G
- Audio/video konverter Rockford Fosgate
- Audio/video konverter Intellinet
- Audio/video konverter PTN-electronics
- Audio/video konverter MuxLab
- Audio/video konverter Zoom
- Audio/video konverter Digitalinx
- Audio/video konverter Monoprice
- Audio/video konverter TV One
- Audio/video konverter Kathrein
- Audio/video konverter Adder
- Audio/video konverter Cudy
- Audio/video konverter SmartAVI
- Audio/video konverter StarTech.com
Nyeste Audio/video konverter Manualer
1 Juni 2025
1 Juni 2025
31 Maj 2025
7 April 2025
25 Marts 2025
25 Marts 2025
12 Marts 2025
9 Marts 2025
9 Marts 2025
27 Februar 2025