Vocopro BT-1 Manual

Vocopro Karaoke system BT-1

Læs gratis den danske manual til Vocopro BT-1 (2 sider) i kategorien Karaoke system. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Vocopro BT-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

BT-1 User’s Guide

BT-1

BLUETOOTH

MUSIC RECEIVER

LINE

OUT

VOL

Getting Connected (For BT-1L only)

Pairing

Installation (For BT-1 only)

1. When powered, the BT-1/L will automatically be discoverable in

pairing mode (indicated by the blinking LED).

2. Go to the Bluetooth settings on your Bluetooth device and pair

the device labeled VOCOPRO. This will cause the LED to remain lit

signaling a successful pairing.

NOTE: If you are prompted for a password, use: 0000.

3. Use the volume knob to adjust volume of bluetooth audio output.

4. Enjoy your music!

1. Connect the power supply to the BT-1L and a power outlet.

2. Using the supplied 1/8” to 1/8” audio cable, connect one end to the audio output on the

BT-1, connect the other end to your powered speaker or audio system.

3. Install the antenna by aligning it to the center of the antenna input and turn clockwise.

1. Remove the expansion port cover plate from your compatible host unit.

2. Find the 6-pin cable and connect its connector to the 6-pin connector on the back of the BT-1.

3. Slide the BT-1 into the port and secure with the screws.

4. Install the antenna by aligning it to the center of the antenna input and turn clockwise.

Antenna

Connector

2 3

Antenna

Connector

NOTE: Do not connect 6-pin

connector and 5V power

adapter simultaneously.

BT-1

BLUETOOTH MUSIC RECEIVER

BT-1

BLUETOOTH MUSIC RECEIVER

BT-1 User’s Guide

v1.0404

www.vocopro.com

OWNER’S MANUAL

Troubleshooting

If you experience performance issues with the BT-1/L, perform

the following:

1. Make sure the BT-1/L is still paired.

This can be veriﬁed by checking the LED.

• Solid LED: Paired

• Blinking LED: Not paired

If need be, repeat the process to pair your Bluetooth device.

2. Make sure you are within operating range.

The operating range is approximately 30 ft. If you are in excess

of 30 ft from the BT-1/L, the signal may cut-out or drop. Also

try and limit any obstructions to line of sight.

3. Check the volume levels.

On the BT-1/L, check the VOLUME knob to make sure it is at a

sufﬁcient level. Check the volume setting for the sound system.

Lastly, check the sound settings on your Bluetooth device.

Speciﬁcations

• Bluetooth: Version 3

• Frequency Band 2.402GHz~2.480GHz ISM Band

• Audio input: Bluetooth

• Audio output: 1/8” mini-jack

• Power - 5VDC 200 mA

6-Pin Connector

Produkt Specifikationer

Mærke:	Vocopro
Kategori:	Karaoke system
Model:	BT-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Vocopro BT-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Karaoke system Vocopro Manualer

Vocopro All-U Karaoke FM Mic Manual

18 September 2025

Vocopro DA-2200PRO Manual

18 September 2025

Vocopro Casaman-Voice Manual

17 September 2025

Vocopro Carry-Oke Star Manual

17 September 2025

Vocopro KJ-6000 Manual

15 August 2025

Vocopro DA-X10PRO Manual

15 August 2025

Vocopro WirelessMix-2 Manual

15 Juni 2025

Vocopro WirelessMix-BASIC Manual

10 Juni 2025

Vocopro All-U Karaoke Mic Manual

9 Juni 2025

Vocopro ProjectorOke Manual

16 August 2024

Karaoke system Manualer

Nyeste Karaoke system Manualer

Pyle PPHP1979 Manual

31 August 2025

Party Light & Sound KA100 Manual

13 August 2025

Pyle PKBRD4112 Manual

9 August 2025

6 August 2025

6 August 2025

5 August 2025

5 August 2025

5 August 2025

5 August 2025

LG LH-TK3526SQ Manual

5 August 2025