Vocopro PV-802 Manual


Læs nedenfor 📖 manual på dansk for Vocopro PV-802 (18 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.6 stjerner i gennemsnit af 2.5 brugere

Side 1/18

The PV-802 speakers can each be mounted on speaker stands using a VocoPro speaker stand adapter (sold separately).
NOTE: These speaker stand adapters are included with the purchase of VocoPro SS-88 speakers
stands. Contact your local VocoPro dealer to order a pair of VocoPro SS-88 speaker stands.
Attaching the Adapter to the Speakers
NOTE: The 4 mounting screws are included with the PV-802.
1. Remove the rubber pads covering the screw openings on the bottom of the PV-802 speakers to reveal the
NOTE: DO NOT remove the screw that is already on the bottom of the PV-802 main speaker. This
screw is keeping the internal amp and mixer in place and must not be removed.
2. Align the slots on the flat part of the adapter with the holes on the bottom of the PV-802 speaker (Fig. B)
3. Screw in the screws, tightly fastening the adapter to the speaker.
NOTE: Make sure the adapter is attached firmly to the speaker.
Attaching the Speaker Stand Adapters
DO NOT
REMOVE
Rub
Rubber Pads/
Screw Holes
MAIN SPEAKER (BOTTOM) SECOND SPEAKER (BOTTOM)
Fig.A
Fig.B
1


Produkt Specifikationer

Mærke: Vocopro
Kategori: Ikke kategoriseret
Model: PV-802

Har du brug for hjælp?

Hvis du har brug for hjælp til Vocopro PV-802 stil et spørgsmål nedenfor, og andre brugere vil svare dig