Vollrath 59508DW Manual

Vollrath Komfur 59508DW

Læs gratis den danske manual til Vollrath 59508DW (24 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Vollrath 59508DW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Operator’s Manual

Mirage

Induction Buffet Warmers

2017 The Vollrath Company L.L.C. Part No. 2350248-1 ml 8/18/17

Thank you for purchasing this Vollrath equipment. Before operating the

equipment, read and familiarize yourself with the following operating

and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE

REFERENCE. Save the original box and packaging. Use this packaging

to ship the equipment if repairs are needed.

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand

their meaning. This manual contains safety precautions which are

explained below. Please read carefully.

Warning is used to indicate the presence of a hazard that will or can

cause severe personal injury or death.

Caution is used to indicate the presence of a hazard that will or can

cause minor or major personal injury if the caution is ignored.

NOTICE: Notice is used to note information that is important but not

hazard-related.

To reduce risk of injury or damage to the equipment

• Plug only into grounded electrical outlets matching the nameplate

rated voltage.

• As a precaution, persons using a pacemaker should stand back

12" (30 cm) from an operating unit. Studies have shown that the

induction element will not disrupt a pacemaker.

• Keep all credit cards, driver license and other items with a magnetic

strip away from an operating unit. The unit’s magnetic field will

damage the information on these strips.

• The heating surface is made of a strong, non-porous material.

However, should it crack or break, stop using and immediately

unplug the equipment.

• Do not leave an empty vessel on an operating unit.

• equipment should only be used in a flat, level position.

• Unplug equipment and let it cool before cleaning or moving.

• Do not touch the heating surface. It remains hot after the equipment

is turned off.

• Unplug when not in use.

• Keep equipment and power cord away from open flames, electric

burners or excessive heat.

• Do not heat sealed cans or containers as they may explode.

• Do not operate unattended.

• Closely supervise equipment operating in public areas and/or

around children.

• Do not operate if equipment has been damaged or is malfunctioning

in any way.

• Do not place any objects inside the air intake or exhaust panels.

WARNING

CAUTION

Item No. Model Description

5950275 59502XX 16"x 16" (40.6 x 40.6 cm)

Countertop Warmer, Black

595027502

595027503

595027504

595027505

5950280 16"x 16" (40.6 x 40.6 cm)

Countertop Warmer, Natural

595028002

595028003

595028004

595028005

59502DW 16"x 16" (40.6 x 40.6 cm)

Drop-in Warmer

59502DW02

59502DW03

59502DW04

59502DW05

5950875 59508XX 16"x 23" (40.6 x 58.4 cm)

Countertop Warmer, Black

595087502

595087503

595087504

595087505

5950880 16"x 23" (40.6 x 58.4 cm)

Countertop Warmer, Natural

595088002

595088003

595088004

595088005

59508DW 16"x 23" (40.6 x 58.4 cm)

Drop-in Warmer

59508DW02

59508DW03

59508DW04

59508DW05

2 Mirage

Induction Buffet Warmers Operator’s Manual

FUNCTION AND PURPOSE

This equipment is intended to hold heated prepared food at serving

temperatures. It is intended for use in commercial foodservice

operations only. It is not intended for household, industrial or

laboratory use. This equipment is designed to work with a

maximum of one induction-ready chafer or serving vessel.

Induction Ready Serving Vessel

• Vessel base must be flat

• Vessel base size must be:

• Material construction must be: ferrous stainless steel, iron, cast iron

Unsuitable Serving Vessel

• Vessel with a base less than 4½" (11.4 cm)

• Pottery, glass, al opper serving vesselsuminum, bronze or c

• Serving vessel with any type of footed base

FCC STATEMENT

This equipment has been tested and found to comply with Part 18 of

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

To assure continued compliance, any changes or modifications not

expressly approved by the party Responsible for compliance could void

the user’s authority to operate this equipment.

COUNTERTOP WARMER INSTALLATION

Clearance and Environment Requirements

This equipment is not designed to be enclosed or built into any area.

There must be a minimum clear space of:

• Under the warmer, a distance equal to the height of the feet of the

warmer.

• Sufficient airflow must be allowed around the equipment. Warmer

must not be placed on a soft surface that could restrict airflow to

the bottom of the warmer. Blocking the airflow could cause the

equipment to overheat.

• The maximum intake temperature must not exceed 104°F (40°C).

Temperatures are measured in ambient air while all appliances in

the kitchen are in operation.

Installation

1. Place the equipment on a hard flat stable surface.

2. Plug the power cord into a grounded electrical outlet with the

matching nameplate rated voltage.

NOTICE: Using a voltage other than the nameplate rated voltage

will cause damage to the equipment. Incorrect voltage,

modification to the power cord or electrical components

can damage equipment and will void the warranty.

Warmer Size Minimum Base Maximum Base

16" x 16"

4½"(11.4 cm)

10¼"(26 cm)

16" x 23" 10¼"x 17¼" (26 x 43.8cm)

Produkt Specifikationer

Mærke:	Vollrath
Kategori:	Komfur
Model:	59508DW

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath 59508DW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Komfur Vollrath Manualer

Vollrath HPI4-300002 Manual

21 Juni 2025

Vollrath 59502DW Manual

16 Juni 2025

Vollrath 6958301 Manual

16 Juni 2025

Vollrath 912HIMC Manual

16 Juni 2025

Vollrath 5950880 Manual

16 Juni 2025

Vollrath 69524 Manual

16 Juni 2025

Vollrath 69505 Manual

15 Juni 2025

Vollrath 59510P Manual

15 Juni 2025

Vollrath 59501 Manual

15 Juni 2025

Vollrath HPI4-380002 Manual

15 Juni 2025

Komfur Manualer

Nyeste Komfur Manualer

Frigidaire FCRE3083AD Manual

31 Juli 2025

Frigidaire FCRG3051BW Manual

31 Juli 2025

AEG XCB6845AB Manual

31 Juli 2025

Elica NikolaTesla ALPHA PRF0183127 Manual

31 Juli 2025

Frigidaire GCFD3661AF Manual

31 Juli 2025

Frigidaire GCRE3060BD Manual

31 Juli 2025

Gaggenau VR414611 Manual

31 Juli 2025

AEG HK857870XB Manual

31 Juli 2025

Gaggenau VK230 Manual

31 Juli 2025

Elica ENF436BL Manual

31 Juli 2025