Vollrath 6950020 Manual

Vollrath Komfur 6950020

Læs gratis den danske manual til Vollrath 6950020 (12 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Vollrath 6950020, eller vil du spørge andre brugere om produktet?

Side 1/12
Operator’s Manual
Commercial Induction Range
©
2020 The Vollrath Company L.L.C. Part No. 351043-1 ml 1/10/20
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
Plug only into grounded electrical outlets that match the voltage on
the rating label.
This equipment requires a dedicated circuit.
Do not use extension cords, power strips or surge protectors with
this equipment.
Unplug this equipment from the wall outlet when not in use.
Use this equipment only in a flat, level position.
To protect against electrical shock do not immerse the cord or plug
in water. Keep the cord away from heated surface. Do not let the
cord hang over the edge of table or counter.
As a precaution, persons using a pacemaker should stand back 12"
(30 cm) from an operating unit. Studies have shown that the
induction element will not disrupt a pacemaker.
Keep all credit cards, driver licenses and other items with a magnetic
strip away from an operating unit. The unit’s magnetic field will
damage the information on these strips.
The heating surface is made of a strong, non-porous material.
However, should it crack or break, stop using and immediately
unplug the unit. Cleaning solutions and spills could penetrate the
broken cook-top and create a risk of electrical shock.
Do not operate this equipment with a damaged cord or plug or if it is
not functioning properly.
Do not operate unattended. Closely supervise units operating in
public areas and/or around children.
Do not place any objects inside the air intake or exhaust panels.
Do not attach any accessory objects to this equipment.
FUNCTION AND PURPOSE
This equipment is intended for use in commercial food service
operations only. It is not intended for household, industrial or
laboratory use. It is intended to be used with induction-ready cookware
with a flat, ferrous base measuring 4¾" (12.1 cm) to
10¼" (26 cm) wide.
CLEARANCE AND ENVIRONMENT REQUIREMENTS
This unit is not designed to be enclosed or built into any area. Sufficient
airflow must be allowed around the unit. Blocking the airflow could
cause the unit to overheat.
Rear of the range to any surrounding surface: 4" (10 cm)
Bottom of the range to any surrounding surface: ¾" (1.9 cm)
Indoor use only.
Do not place the equipment on or near heat-producing equipment.
WARNING
CAUTION
Item No. Description
6950020 Commercial Countertop Induction Range (US)
6951020 Commercial Countertop Induction Range (US and Canada)
2 Commercial Induction Range Operator’s Manual
COOKWARE REQUIREMENTS
Note: Cookware with inferior construction or material may not perform
well. Cookware with a larger base diameter can be used, however only
the area of the cookware above the induction coil will heat. The more
cookware extends past the coil, the more the overall performance will
be reduced.
FEATURES AND CONTROLS
OPERATION
NOTICE: This equipment requires a dedicated circuit.
NOTICE: Using a voltage other than the nameplate rated voltage will
cause damage to the equipment. Incorrect voltage,
modification to the power cord or electrical components
can damage equipment and will void the warranty.
NOTICE: Do not preheat empty cookware. Because of the speed and
efficiency of the induction range, cookware can very
quickly overheat and be damaged.
NOTICE: Do not drop cooking utensils or other objects onto the
cooking surface. The strong, non-porous surface will
break. The warranty does not cover this type of abuse.
NOTICE: Do not leave an empty pan on an operating unit.
NOTICE: Do not heat sealed cans or containers as they may
explode.
Turn on the Induction Range
1. Place the equipment on a hard flat stable surface.
2. Plug the power cord into a grounded electrical outlet with the
matching nameplate rated voltage.
3. Press and release .
4. Place the induction-ready cookware containing food in the center
position of a heating surface, The heating LED will illuminate to
indicate the range is heating.
Adjust the Power Level or Temperature
1. Press and release to switch between heat level and
temperature modes.
2. Press and release or to change the heat level or
temperature.
Cook Food
Removing cookware from the cooking surface for more than ten
minutes will cause the unit to automatically turn off. Removing
cookware for less than ten minutes will not interrupt operation.
Compatible
Incompatible
Flat base 4¾" to 10¼"
(12.1 to 26 cm) in diameter
Ferrous stainless steel, iron,
cast iron
Base is not flat
Base is less than 4¾" (12.1 cm)
in diameter
Pottery, glass, aluminum,
bronze or copper cookware
Metal disk on bottom of pan
NOTICE: Equipment Damage Hazard
Not intended for use with aluminum pans with a metal disk
on the bottom. Under high heat, the metal disk will separate
from the pan. These pans may damage your unit and void
your warranty.
A On/Off button. Press to turn equipment on.
B Heating LED. Illuminates when induction read-cookware is
detected and the equipment is heating.
C Up button. Increases the power level or temperature.
D Down button. Decreases the power level or temperature.
E Heat/Temperature Range LEDs. Shows a heat range between
low and high (nine settings). Or, shows a temperature value
using temperature (seven settings).
F Heat LED. Illuminates when the heat range display mode has
been selected.
G Temperature LED. Illuminates when the unit is in temperature
mode. This light is constant or blinks depending on the model.
H Heat/Temp button. Switches between temperature and heat level
modes.
4¾" to 10¼"
less than 4¾"
H G D C A
F E
B
WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the
equipment. Liquid inside the equipment could cause an
electrical shock.
CAUTION
Burn Hazard
Do not touch hot food, liquid or heating surfaces while
equipment is heating or operating.


Produkt Specifikationer

Mærke: Vollrath
Kategori: Komfur
Model: 6950020

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath 6950020 stil et spørgsmål nedenfor, og andre brugere vil svare dig