Vortex Crossfire Riflescope Manual

Vortex Diverse Crossfire Riflescope

Læs gratis den danske manual til Vortex Crossfire Riflescope (4 sider) i kategorien Diverse. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Vortex Crossfire Riflescope, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Congratulations on your Crossfire!
At Vortex, your love for the outdoors is the driving force behind
all we do. Our commitment to you, our customers and dealers,
is unmatched in the industry—and is the strength of our success.
From impressive images to durable construction, our carefully
designed and field-tested optics are the culmination of an
unwavering dedication to deliver quality, reliability and superior
performance to you, our valued customer.
Please read this entire manual before mounting your rifl escope.
A
F
D
BE
C
G
H
Vortex Crossfire Series Riflescopes
A. Fast Focus Ring
B. Magnification Ring
C. Eyepiece
D. Windage Dial
E. Elevation Dial
F. Objective Lens
G. Illuminated Reticle Knob (on select models)
H. Adjustable Objective (AO models only)
Riflescope Adjustments
To set the reticle focus, begin by allowing your eyes to focus on
a distant object for several moments—not looking through the
scope. Then, hold the scope up to the sky and quickly look through
it. Never look directly into the sun! Pay attention to the sharpness
of the reticle, and adjust the eyepiece focus until it is as sharp as
possible. The reticle image should be crisp and sharp immediately
when you look. Since your eyesight may change over time, it’s a
good idea to periodically re-check this adjustment.
Rifl escopes are not intended for looking at the sun or any other intense light
source. Such use could damage the retina and cornea of your eyes—even to the
point of causing blindness.
Caution!
1. Reticle Focusing
Vortex Crossfire riflescopes incorporate fingertip-adjustable
elevation and windage dials with tactile and audible clicks. Each
audible click moves the bullet’s point-of-impact a fraction of
a minute of angle (MOA)—either 1/4 or 1/8 MOA. Refer to
markings on the inner turret knob for click movement.
2. Windage and Elevation Adjustment
• 1/4 MOA* closely corresponds to 1/4 inch at 100 yards, 1/2 inch
at 200 yards, 3/4 inch at 300 yards...taking four (4) clicks to move
the bullet’s point-of-impact one inch at 100 yards.
• 1/8 MOA* closely corresponds to 1/8 inch at 100 yards, 1/4 inch
at 200 yards, 3/8 inch at 300 yards...taking eight clicks to move the
bullet’s point-of-impact one inch at 100 yards.
Begin adjusting the windage and elevation settings by first
removing the outer covers. Folowing the indicator arrows, move
the turret dials in the direction you wish the bullet’s point-of-
impact to change. To make the adjustments, turn the adjustment
dial in the appropriate direction (up/down or left/right) as
indicated by the arrows.
Some Crossfire adjustable objective (AO) models use tall target
turrets for improved adjustability of windage and elevation. These
turrets will also allow you to re-index the zero indicator after
sight-in—without disturbing your settings. This very handy
Tall Target Turret Models
How to Adjust Windage and Elevation Settings
feature allows you to return quickly to your original zero if
temporary corrections are used in the field.
www.vortexoptics.com
1. After final sight-in is complete,
remove the inner turret knob by
loosening the three small screws
located on top of the turret with a
1.5mm hex wrench.
2. Carefully rotate the outer dial until
the zero mark is re-aligned with the
indicator line.
3. Re-tighten the small screws.
Loosen
the 3
screws.
To change the power, turn the magnification ring to the desired level. Use lower powers (which offer a wider field of view) when you may need to
make a quick shot at closer distances.
3. Variable Magnification Adjustments
A fi xed-power rifl escope has no magnifi cation adjustment.
Adjustable Objective
Parallax is a phenomenon that results when the target image does not quite fall on the same optical plane as the reticle within the riflescope.
When the shooter’s eye is not precisely centered in the eyepiece, there can be an apparent movement of the target in relation to the reticle which
can cause a small shift in the point of aim.
4. Parallax Adjustments
Adjustable Objective (AO) Lens
Setting the adjustable objective lens on the AO models is very easy.
1. Be sure that the reticle is properly focused (see page 6).
2. Match the range number on the objective lens barrel(distance you are
shooting) as closely as possible to the indicator arrow on the riflescope body.
For the best accuracy, use a laser rangefinder to measure distances.
3. Check the setting by moving your head up/down and left right while
looking through the scope. The setting is correct if there is no apparent
movement between the reticle and target. If there is movement, continue
adjusting the lens slightly until the movement is eliminated.
Illuminated
Reticle
Knob
Select riflescopes in the Crossfire series
use a variable intensity reticle illumination
knob. Rotate the knob in a clockwise
rotation to increase the illumination
intensity; adjust the dial on the knob to
turn the illumination off and on.
5. Illuminated Reticle Adjustment
Use a coin to remove the outer cover and
replace the battery. The battery operates
on one CR 2032 Lithium battery; typical
life is up to 1,000 hours (Level 1), 70 hours
(Level 6), 25 hours (Level 11).
Battery Operation
Riflescope Installation
To get the best results from your Crossfire riflescope, proper mounting is essential. Although not extremely difficult, the correct steps must be
followed. If you are unsure of your abilities, it would be best to use the services of a qualified gunsmith.
Your Crossfire riflescope is pre-set at the factory with the
reticle centered in both adjustment ranges; this is the ideal
position to begin sight-in. If you have changed the settings and
wish to re-center the reticle, follow this procedure:
1. Centering the Reticle
A. Turn either dial (windage or elevation) as far as you can in
one direction until it stops.
B. Turn the dial in the other direction until it stops, carefully
counting the rotations as you turn the dial.
C. Turn the dial back again to half the number of rotations counted
in Step B—the reticle will be centered for that adjustment only.
D. Repeat for the other adjustment so that the reticle is centered
in both the windage and elevation settings.
Base
Rings
Using high quality, appropriately-sized (1-inch
or 30mm, depending on riflescope model) rings
and bases matched to your rifle, mount the
scope as low as possible on the rifle. Be sure to
follow manufacturer instructions supplied with
the rings and mounting base. Whether you use
high, medium, or low rings will depend on the riflescope model and your
particular firearm. A lower mounting will help assure proper cheek weld,
and aid in a solid shooting position and fast target acquisition.
We recommend using the lowest rings that will give complete clearance of
the riflescope and rifle. Avoid any contact with the barrel, receiver, bolt
handle, or any other part of the rifle. Work the riflescope’s zoom ring and
rifle’s action to assure no contact.
2. Mount As Low as Possible
Parallax causes the greatest problem on small targets at
high magnification as with varmint and target shooting.
Selected models come with
an adjustable objective (AO).
Most other models are set at
the factory to be parallax-free
at 100 yards; Rimfire models
are parallax-free at 50 yards.
www.vortexoptics.com

Produkt Specifikationer

Mærke: Vortex
Kategori: Diverse
Model: Crossfire Riflescope

Har du brug for hjælp?

Hvis du har brug for hjælp til Vortex Crossfire Riflescope stil et spørgsmål nedenfor, og andre brugere vil svare dig


Diverse Vortex Manualer

Vortex

Vortex Razor HD 5-20x50 Riflescope Manual

9 August 2024
Vortex

Vortex DIAMONDBACK HP Riflescope Manual

19 Juli 2024
Vortex

Vortex Crossfire Riflescope Manual

19 Juli 2024

Diverse Manualer

Nyeste Diverse Manualer

GoPro

GoPro LCD Touch BacPac Manual

17 Januar 2025
GoPro

GoPro Wi-Fi Combo Kit Manual

16 Januar 2025
AL-KO

AL-KO AKS 1300 Manual

15 Januar 2025
Schavis

Schavis CIRCLE DUO X-LINE Manual

13 Januar 2025
Schavis

Schavis INDOOR DUO X-LINE Manual

13 Januar 2025
Schavis

Schavis INDOOR DUO Manual

13 Januar 2025
ION

ION ICADE CORE Manual

13 Januar 2025
BeamZ

BeamZ 150.460 - Panther 25 Manual

11 Januar 2025
Walkera

Walkera Goggle 3 Manual

15 Oktober 2024
Walkera

Walkera Goggle 4 Manual

15 Oktober 2024