Press to start recording
- Depending on which channel is active, you will see the LED turn red when recording.
Press again to stop recording and automatically begin playing your loop back.
- Depending on which channel is active, you will see the LED turn green when playing
back loops. Each time the recorded loop cycles, you’ll see the Stomp switch LED blink.
Hold to undo a recording
- Holding once will undo the last loop recorded.
- If you have multiple loops overdubbed, holding a second time will erase all of them.
Left Stomp Switch
RIGHT Stomp Switch
Press to stop loop playback
- Depending on which channel is active and your current state of speed FX, you will see the LED
turn white or blue when stopping.
• White means at least one loop is recorded and stopped, waiting to be played back again.
• Blue means at least one loop is recorded and stopped, waiting to be played back again, plus
Speed FX is active.
Hold to activate speed FX
- Depending on which channel is active and your current state of playback/recording, you will
see the LED turn yellow, cyan, pink, or blue.
• If the LED is yellow, that means speed FX is active, but there are no loops recorded.
• If the LED is cyan, that means a loop is playing back with Speed FX engaged.
• If the LED is pink, that means you are recording with Speed FX active.
• If the LED is blue, that means Speed FX is active, there is at least one loop recorded, and
playback is stopped.
- Note that when you record another loop while Speed FX is active, turning Speed FX back off will
then impact the playback of that loop.
• For example, if you are in 2x playback speed and record a loop, when you go back to 1x
playback speed, that loop will now be in 0.5x speed.
• Vice versa, if you are in 0.5x playback speed and record a loop, when you go back to 1x
playback speed, that loop will now be in 2x speed.
Hold again to turn off speed FX
- Depending on which channel is active and your current state of playback/recording, you will
see the LED turn white, green, red, or turn off. Continue to the next page for the LED color key.
