WarmlyYours TWS4-MLT11KH Manual

WarmlyYours Elektrisk håndklædetørrer TWS4-MLT11KH

Læs gratis den danske manual til WarmlyYours TWS4-MLT11KH (4 sider) i kategorien Elektrisk håndklædetørrer. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om WarmlyYours TWS4-MLT11KH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

TOOLS REQUIRED ACCESSORIES FOR SQUARE/ROUND MOUNTING TUBES

INSTALLATION GUIDE

For TWS4 Series hardwired towel warmers.

INSTRUCTIONS

Before using this product, please read the following instructions carefully and keep this

pamphlet for future reference.

ABOUT THE PRODUCT:

This heated towel warmer is designed for drying/warming towels or clothes, it has a surface

stabilized temperature of 122-131ºF, and it is used in household bathrooms and kitchens, as

well as in hotels and restaurants or other public areas. This appliance uses a voltage of 120

VAC, and is manufactured according to cULus standards.

SAFETY PRECAUTIONS:

1. The towel warmer must be used with a Ground Fault Circuit Intercepter (GFCI) circuit.

2. This product is supplied with a three-prong plug or three-wire cable.

To avoid unnecessary risk or danger, this product must be properly grounded.

3. Any repairs must be done by a qualified technician who is deemed qualified by industry

standards. When any external wire fittings are required, the unit must be disconnected

from the circuit.

NOTE:

1. In the event of any difference in technical specifications, please refer to the actual product.

2. Please wipe the towel rail with a soft, dry cloth when cleaning it.

Installation Support •(800) 875-5285 • WarmlyYours

Installation Fittings:

(1+2): Mounting tubes (4 pieces) & Set screws (4 pieces)

(3) 4 brackets (4 pieces)

(4) Short mounting screws (3 pieces) Long mounting screw (1 piece)

(5) Drywall anchor (4 pieces)

(6) Long screws (4 pieces)

This product must be installed in accordance with the instructions in

the manual and the NEC and CEC guidelines relating to electrical

fixtures in bathrooms. The Towel Warmer must be on a GFCI

protected circuit and be wired by a professional who is certified

to do electrical wiring.

In order to reduce electrical shock, this towel warmer should be

installed on a 15A GFCI protected branch circuit (14AWG) and to an

outlet box that is 4 inches (10.16 cm) high by 2 Inches

(5.08 cm) wide.

1+2

3 5

4 6

1+2

3 5

4 6

WARNING:

1. Only use for drying textiles which have been dampened by water.

Please note: silk fabrics can not be used on the towel warmer.

2. If heating wire is damaged, the whole product should be replaced.

3. If warming multiple towels on the device simultaneously, make sure that the towels do not

overlap one another.

ACCESSORIES

INSTALLATION GUIDE

For TWS4 Series hardwired towel warmers.

Installation Support •(800) 875-5285 • WarmlyYours

3 PCS

INSTALLATION: (WARNING: The electrical

connection should avoid all water.)

Please refer to all the following steps if the wall

brackets are taken apart from the vertical bars.

Please refer to Steps 5-11 if the wall brackets are

fixed on vertical bars already.

1 PCS

4 PCS

3 PCS

1 PCS

3 PCS

2 PCS

STEP 1

STEP 2

STEP 3

STEP 1: As shown in the picture, insert the short mounting

screw (d) through the tube in the center of the mounting

tube (a).

STEP 2: Use the short mounting screw (d) to fix the

mounting tube (a) to the threaded metal pad on the

vertical bar on the back of the towel warmer.

STEP 3: Screw down the short mounting screw (d) with a

screwdriver. Note that the set screw of the tube (a) should

point towards the floor when the towel warmer is wall mount-

ed. Fix the remaining two mounting tubes (a) to the vertical

bars with threaded metal pads by repeating Step 1-3.

STEP 4: Guide the electrical cord through the electrical

connection mounting tube (b) and use the long mounting

screw (e) to tighten the electrical connection mounting tube

to the vertical bar.

STEP 4

Produkt Specifikationer

Mærke:	WarmlyYours
Kategori:	Elektrisk håndklædetørrer
Model:	TWS4-MLT11KH

Har du brug for hjælp?

Hvis du har brug for hjælp til WarmlyYours TWS4-MLT11KH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Elektrisk håndklædetørrer WarmlyYours Manualer

WarmlyYours Classic TWS7-ROM10BH Manual

11 December 2024

WarmlyYours TWS4-MLT11KH Manual

11 December 2024

WarmlyYours Maple TWS6-MPL08KH Manual

11 December 2024

WarmlyYours Infinity TW-F10KS-HP Manual

11 December 2024

WarmlyYours Barcelona TW-BC-08BS-FS2 Manual

28 September 2024

WarmlyYours Tahoe TWS2-TAH07GH Manual

22 August 2024

Elektrisk håndklædetørrer Manualer

Nyeste Elektrisk håndklædetørrer Manualer

PAX TR65 Manual

1 April 2025

PAX Momento II Manual

1 April 2025

SereneLife SLTLW600 Manual

24 September 2024

SereneLife SLTLW700 Manual

23 September 2024

SereneLife SLTLW800 Manual

23 September 2024

Hacienda TR100 Manual

2 September 2024

Lenoxx TR120 Manual

2 September 2024

SereneLife SLTLW105 Manual

27 August 2024

ProfiCare PC-EHW 3115 Manual

25 August 2024

Solac Tromsø TE8986 Manual

24 August 2024