Wasp WPA1200 Manual

Wasp Stregkodelæser WPA1200

Læs gratis den danske manual til Wasp WPA1200 (44 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Wasp WPA1200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

WPA1200

Product Reference Guide

Wasp Barcode Technologies

WPA1200 Product Reference Guide

Laser Information

The WPA1200 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J

and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The

WPA1200 series contains an internal Visible Laser Diode (VLD) The VLD emissions do not exceed the maximum

limits set forth in the above regulations. The scanner is designed so that there is no human access to harmful

laser light during normal operation, user maintenance or during prescribed service operations.

The laser safety warning label required by the DHHS/IEC for the WPA1200 series' optional laser scanner module

is located on the memory compartment cover, on the back of the unit.

Caution: Use of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous laser light. Use of optical instruments with the scanner will increase

eye hazard. Optical instruments include binoculars, microscopes and magnifying glasses. This

does not include eyeglasses worn by the user.

Notices

This unit is equipped with a battery pack and backup batte he WPA1200 may not power-on ry. It is possible that t

due to battery discharge as a result of storage.

In the above situation, plug the WPA1200 to the USB charging cable that is with DC in port or put the unit into the

WPA1200 Cradle (with 5V/3A AC-DC adapter), and recharge the unit for 16 hours in order to fully charge its

backup battery.

The backup battery will charge from external power or the main battery (if the main battery still has enough power

to turn on). In the event the main battery is fully charged, refrain from using the WPA1200 for 16 hours in order for

the main battery to fully charge the backup battery.

Backing-up data by backup battery only without the main battery installed in battery compartment may take as

long as 2 hours. Therefore, in order to prevent data protection failure due to backup battery failure, do not leave

the WPA1200 without the rechargeable ba nnection to AC power for an extended ttery pack installed, or without co

period of time.

Battery charge notice

It is important to consider the atmospheric temperature whenever you are charging the Lithium-Ion battery pack.

The process is most efficient at normal room temperature or slightly cooler. It is essential that you charge

batteries within the stated range of -5°C to 50°C. Charging batteries outside of the specified range could damage

the batteries and shorten their charging life cycle.

Storage and safety notice

Although charged Lithium-Ion batteries may be left unused for several months, their capacity may be depleted

due to build up of internal resistance. If this happens they will require recharging prior to use. Lithium-Ion batteries

may be stored at temperatures between-20°C to 60°C; however, they may be depleted more rapidly at the high

end of this range. It is recommended to store batteries within normal room temperature ranges.

Produkt Specifikationer

Mærke:	Wasp
Kategori:	Stregkodelæser
Model:	WPA1200
Kode for international beskyttelse (IP):	IP54
Type:	Håndholdt stregkodelæser
Bredde:	72.1 mm
Dybde:	26.6 mm
Højde:	149.5 mm
Vægt:	290 g
Produktfarve:	Grå
Batterikapacitet:	1950 mAh
Indbygget skærm:	Ja
Skærmopløsning:	240 x 320 pixel
Bluetooth:	Ja
Batteriteknologi:	Lithium-Ion (Li-Ion)
Skærmteknologi:	LCD/TFT
Scanner type:	1D
Intern hukommelse:	128 MB
Kabler inkluderet:	AC, USB
Bluetooth-version:	1.2
Forbindelsesteknologi:	Kabel & trådløs
Certificering:	CE, FCC, BSMI, VCCI, CCC, RoHS
Strømkilde type:	Batteri
Batteritype:	3.7 V
Processorfrekvens:	520 MHz
Sensortype:	Laser
Standard grænseflader:	Bluetooth, USB
RAM kapacitet:	64 MB
Understøtter lineær (1D) stregkoder:	Code 11, Code 32, Code 39, Code 93, EAN-13, EAN-8, U.P.C.
Understøtter matrix (2D) stregkoder:	Ikke understøttet