Wasp WWR2905 Manual

Wasp Stregkodelæser WWR2905

Læs gratis den danske manual til Wasp WWR2905 (41 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Wasp WWR2905, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/41

WandReader

Programming Guide

Please Read

Note:

The Wasp WandReader is ready to scan the most popular

bar codes out of the box. This manual should only be

used to make changes in the configuration of the

scanner for specific applications. This scanner does not

require software or drivers to operate. The scanner enters

data as keyboard data. Please review this manual before

scanning any of the programming bar codes in this manual.

Tech Tip

If you are unsure of the scanner configuration or have

scanned the incorrect codes, please scan the default

bar code on page 6. This will reset the scanner to its

factory settings.

No part of this publication may be reproduced or transmitted in any form

or by any means without the written permission of Wasp Technologies.

The information contained in this document is subject to change without

notice.

Wasp is a trademark of Wasp Technologies. All other trademarks or registered trademarks are the

property of their respective owners.

Produkt Specifikationer

Mærke:	Wasp
Kategori:	Stregkodelæser
Model:	WWR2905
Vægt:	76 g
Opbevaringstemperatur (T-T):	-20 - 60 °C
Driftstemperatur (T-T):	0 - 50 °C
Dimensioner (BxDxH):	150 x 22 x 29.6 mm
Kabellængde:	1.82 m
Indgangsspænding:	5 V
Sensortype:	Fotodiode
Standard grænseflader:	USB
Bølgelængde:	650 nm
Strømforbrug:	60 mA
Lyskilde:	LED