Wells G246 Manual

Wells Grillplade G246

Læs gratis den danske manual til Wells G246 (40 sider) i kategorien Grillplade. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Wells G246, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

BUILT-IN

ELECTRIC

GRIDDLES

MODELS

G136, G196,

G236, G246,

G606,

JG246UL

Includes

INSTALLATION

USE & CARE

PARTS LISTS

WIRING DIAGRAMS

111

p/n 2M-303340 Rev. D M101 110510

Model G136

Model JG246UL

111 p/n 2M-303340 OpManual Built-In Electric Griddles

Unless otherwise specied, all commercial cooking

equipment manufactured by Wells Manufacturing is

warranted against defects in materials and workmanship

for a period of one year from the date of original installation

or 18 months from the date of shipment from our factory,

whichever comes rst, and is for the benet of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW

OR IN FACT, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE, AND/OR FOR

DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES

IN CONNECTION WITH WELLS MANUFACTURING

PRODUCTS. This warranty is void if it is determined

that, upon inspection by an authorized service agency,

the equipment has been modied, misused, misapplied,

improperly installed, or damaged in transit or by re, ood or

act of God. It also does not apply if the serial nameplate has

been removed, or if service is performed by unauthorized

personnel. The prices charged by Wells Manufacturing for

its products are based upon the limitations in this warranty.

Seller’s obligation under this warranty is limited to the repair

of defects without charge by a Wells Manufacturing factory

authorized service agency or one of its sub-service agencies.

This service will be provided on customer’s premises for

non-portable models. Portable models (a device with a cord

and plug) must be taken or shipped to the closest authorized

service agency, transportation charges prepaid, for service.

In addition to restrictions contained in this warranty, specic

limitations are shown in the Service Policy and Procedure

Guide. Wells Manufacturing authorized service agencies are

located in principal cities. This warranty is valid in the United

States and Canada and void elsewhere. Please consult your

classied telephone directory, your foodservice equipment

dealer or contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and

le “CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specied on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility.

Those miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted

for ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). Any use of

non-genuine Wells parts completely voids any

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are not covered by warranty. This

includes institutional and correctional facilities.

Produkt Specifikationer

Mærke:	Wells
Kategori:	Grillplade
Model:	G246

Har du brug for hjælp?

Hvis du har brug for hjælp til Wells G246 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Grillplade Wells Manualer

Wells HDTG6030G Manual

19 August 2024

Wells HDCB2430G Manual

17 August 2024

Wells HDG6030G Manual

15 August 2024

Wells B506 Manual

14 August 2024

Wells B50 Manual

13 August 2024

Wells JG246U Manual

13 August 2024

Wells HDTG4830G Manual

13 August 2024

Wells HDCB1230G Manual

13 August 2024

Wells G246 Manual

12 August 2024

Wells B406 Manual

11 August 2024

Grillplade Manualer

Nyeste Grillplade Manualer

Proctor Silex 38513 Manual

18 Juni 2025

Vulcan VMCS-102 Manual

17 Juni 2025

Blackstone 2287 Manual

16 Juni 2025

Cadco CPG-10F Manual

16 Juni 2025

American Range ARKB-24 Manual

16 Juni 2025

Bakers Pride L-24RS Manual

15 Juni 2025

Browin 330505 Manual

15 Juni 2025

Cadco CPG-15 Manual

15 Juni 2025

Cadco CPG-10 Manual

15 Juni 2025

Cooking Performance Group 351GTUCPG48N Manual

15 Juni 2025