Wells HDHP2430G Manual

Wells Ovn HDHP2430G

Læs gratis den danske manual til Wells HDHP2430G (32 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Wells HDHP2430G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

WELLS BLOOMFIELD, LLC

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

MODELS

HDHP1230G

HDSU1230G

HDHP2430G

HDSU2430G

HDHP3630G

HDSU3630G

Includes

INSTALLATION

USE & CARE

p/n 2M-306627 Rev. F M226 101109

FOR YOUR SAFETY

Do not store gasoline or other flammable liquids

in the vicinity of this or any other appliance.

WARNING:

Improper installation, adjustment, alteration, service or maintenance can cause

property damage, injury or death. Read the installation, operating and mainte-

nance instructions thoroughly before installing or servicing this equipment.

IMPORTANT:

The purchaser of this equipment must post in a prominent location instructions to be followed in the

event the user smells gas. This information shall be obtained by consulting the local gas supplier.

Model HDHP3630G

226

OPERATION MANUAL

HEAVY DUTY GAS HOTPLATE

ENGLISH

226 306627 OpManual for HDHP-Series Hot Plates

Unless otherwise specified, all commercial cooking

equipment manufactured by WELLS MANUFACTURING is

warranted against defects in materials and workmanship for

a period of one year from the date of original installation or

18 months from the date of shipment from our factory,

whichever comes first, and is for the benefit of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN

FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE, AND/OR FOR DIRECT,

INDIRECT OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.

This warranty is void if it is determined that, upon inspection

by an authorized service agency, the equipment has been

modified, misused, misapplied, improperly installed, or

damaged in transit or by fire, flood or act of God. It also

does not apply if the serial nameplate has been removed, or

if service is performed by unauthorized personnel. The pric-

es charged by Wells Manufacturing for its products are

based upon the limitations in this warranty. Seller’s obliga-

tion under this warranty is limited to the repair of defects

without charge by a Wells Manufacturing factory authorized

service agency or one of its sub-service agencies. This

service will be provided on customer’s premises for non-

portable models. Portable models (a device with a cord and

plug) must be taken or shipped to the closest authorized

service agency, transportation charges prepaid, for service.

In addition to restrictions contained in this warranty, specific

limitations are shown in the Service Policy and Procedure

Guide. Wells Manufacturing authorized service agencies

are located in principal cities. This warranty is valid in the

United States and Canada and void elsewhere. Please

consult your classified telephone directory, your foodservice

equipment dealer or contact:

Service Department, Wells Manufacturing

10 Sunnen Dr., St. Louis, MO 63143

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by

skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and file

“CONCEALED DAMAGE” claim with them. This

should be done within fifteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specified on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those

miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted for

ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). Any use of

non-genuine Wells parts completely voids any

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are not covered by warranty. This

includes institutional and correctional facilities.

Produkt Specifikationer

Mærke:	Wells
Kategori:	Ovn
Model:	HDHP2430G

Har du brug for hjælp?

Hvis du har brug for hjælp til Wells HDHP2430G stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ovn Wells Manualer

Wells HDHP2430G Manual

12 Januar 2025

Wells H63 Manual

18 August 2024

Wells H2412G Manual

15 August 2024

Wells HDHP3630G Manual

14 August 2024

13 August 2024

11 August 2024

11 August 2024

11 August 2024

10 August 2024

9 August 2024

Ovn Manualer

Nyeste Ovn Manualer

Smeg SOPU3304TPX Manual

17 Juni 2025

Trisa Gusto 7381.43 Manual

17 Juni 2025

Fagor 9H-195TCX Manual

17 Juni 2025

Rosieres FOFED7253IN Manual

17 Juni 2025

Smeg SOPU3104TPG Manual

17 Juni 2025

Smeg SF68C1PO Manual

17 Juni 2025

Fagor 9H-185AN Manual

17 Juni 2025

Smeg SOU2104TG Manual

17 Juni 2025

Fagor 9H-760TCN Manual

17 Juni 2025

Smeg SOCU2300MX Manual

17 Juni 2025