Wells RCP-7300ST Manual

Wells Køleskab RCP-7300ST

Læs gratis den danske manual til Wells RCP-7300ST (20 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Wells RCP-7300ST, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING the operators of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OPERATIONS MANUAL

DROP-IN REFRIGERATED

COLD PANS, NSF7

RCP-7050, RCP-7067,

RCP-7100, RCP-7200,

RCP-7300, RCP-7400,

RCP-7500, RCP-7600.

DROP-IN REFRIGERATED

COLD PANS, NSF2

RCP-050, RCP-067,

RCP-100, RCP-200,

RCP-300, RCP-400,

RCP-500, RCP-600.

DROP-IN REFRIGERATED

COLD PANS, SLOPE TOP NSF7

RCP-7100ST, RCP-7200ST,

RCP-7300ST, RCP-7400ST,

RCP-7500ST, RCP-7600ST.

DROP-IN REFRIGERATED

COLD PANS, SLOPE TOP NSF2

RCP-100ST, RCP-200ST,

RCP-300ST, RCP-400ST,

RCP-500ST, RCP-600ST.

INCLUDES INSTALLATION, USE,

CARE, SERVICE AND DIAGRAMS.

405

p/n 2M-305101 Rev. G M405 150902

Model RCP-7200

M405 p/n 2M-305101 Owmers Manual Drop-In Refrigerated Cold Pans

Unless otherwise specied, all commercial cooking

equipment manufactured by WELLS MANUFACTURING is

warranted against defects in materials and workmanship

for a period of one year from the date of original installation

or 18 months from the date of shipment from our factory,

whichever comes rst, and is for the benet of the original

purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW

OR IN FACT, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE, AND/OR FOR

DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES

IN CONNECTION WITH WELLS MANUFACTURING

PRODUCTS. This warranty is void if it is determined

that, upon inspection by an authorized service agency,

the equipment has been modied, misused, misapplied,

improperly installed, or damaged in transit or by re,

ood or act of God. It also does not apply if the serial

nameplate has been removed, or if service is performed

by unauthorized personnel. The prices charged by Wells

Bloomeld for its products are based upon the limitations

in this warranty. Seller’s obligation under this warranty is

limited to the repair of defects without charge by a Wells

Bloomeld factory authorized service agency or one of its

sub-service agencies. This service will be provided on

customer’s premises for non-portable models. Portable

models (a device with a cord and plug) must be taken

or shipped to the closest authorized service agency,

transportation charges prepaid, for service. In addition to

restrictions contained in this warranty, specic limitations are

shown in the Service Policy and Procedure Guide. Wells

authorized service agencies are located in principal cities.

This warranty is valid in the United States and Canada and

void elsewhere. Please consult your classied telephone

directory, your foodservice equipment dealer or contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and le

“CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells cannot assume liability for damage or loss incurred in

transit. We will, however, at your request, supply you with

the necessary documents to support your claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase

other than specied on equipment nameplates are

not covered by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements

and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and, normal

maintenance functions including adjustments of

thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those

miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted

for ninety (90) days from date of purchase on non-

warranty equipment. This parts warranty is limited only

to replacement of the defective part(s). Any use of non-

genuine Wells parts completely voids any warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this

warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to

perform service are not covered by warranty. This

includes institutional and correctional facilities.

Produkt Specifikationer

Mærke:	Wells
Kategori:	Køleskab
Model:	RCP-7300ST

Har du brug for hjælp?

Hvis du har brug for hjælp til Wells RCP-7300ST stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Wells Manualer

Wells RCP-7500 Manual

16 Juni 2025

Wells RCP-7400 Manual

15 Juni 2025

Wells RCTS-4 Manual

11 Juni 2025

Wells ICP600ST Manual

19 August 2024

Wells RCP-7300ST Manual

17 August 2024

Wells ICP200SL Manual

16 August 2024

Wells RCP543 Manual

15 August 2024

Wells ICP600 Manual

15 August 2024

Wells RCP-7300SLST Manual

15 August 2024

Wells RCP-7400SL Manual

15 August 2024

Køleskab Manualer

Nyeste Køleskab Manualer

Grundig GQN1232FX Manual

1 August 2025

RCA RFR320 Manual

1 August 2025

Liebherr ECBN 9471 Manual

1 August 2025

Grundig GSMI1030N Manual

1 August 2025

Liebherr BAY 250m Manual

1 August 2025

Hotpoint SZ 12 A2 D/HA Manual

1 August 2025

Grundig GWN21230XRN Manual

1 August 2025

Liebherr CBNbsc 778i Manual

1 August 2025

Grundig GKN4582VN Manual

1 August 2025

Liebherr ICNbsci 5173 Manual

1 August 2025