Wells RWN1 Manual

Wells Varmeskuffe RWN1

Læs gratis den danske manual til Wells RWN1 (20 sider) i kategorien Varmeskuffe. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Wells RWN1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

WELLS MANUFACTURING

10 Sunnen Dr., St. Louis, MO 63143

telephone: 314-678-6314

fax: 314-781-2714

www.wellsbloomfield.com

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

FREE STANDING

DRAWER WARMERS

with THERMOSTATIC

CONTROL

MODELS

RW1HD

RW2HD

RW3HD

RWN1

RWN2

RWN3

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

041

p/n 2M-303335 Rev. F M041 140124

Model RW2HD

Model RWN2

M041 p/n 2M-303335 Owners Manual Free-Standing Drawer Warmer

Unless otherwise specied, all commercial cooking

equipment manufactured by WELLS MANUFACTURING is

warranted against defects in materials and workmanship for a

period of one year from the date of original installation or 18

months from the date of shipment from our factory, whichever

comes rst, and is for the benet of the original purchaser

only.

THIS WARRANTY IS THE COMPLETE AND ONLY

WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN

FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR ANY

PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT

OR CONSEQUENTIAL DAMAGES IN CONNECTION

WITH WELLS MANUFACTURING PRODUCTS. This

warranty is void if it is determined that, upon inspection by an

authorized service agency, the equipment has been modied,

misused, misapplied, improperly installed, or damaged in

transit or by re, ood or act of God. It also does not apply

if the serial nameplate has been removed, or if service is

performed by unauthorized personnel. The prices charged

by Wells Manufacturing for its products are based upon the

limitations in this warranty. Seller’s obligation under this

warranty is limited to the repair of defects without charge by

a Wells Manufacturing factory authorized service agency

or one of its sub-service agencies. This service will be

provided on customer’s premises for non-portable models.

Portable models (a device with a cord and plug) must be

taken or shipped to the closest authorized service agency,

transportation charges prepaid, for service. In addition to

restrictions contained in this warranty, specic limitations are

shown in the Service Policy and Procedure Guide. Wells

Manufacturing authorized service agencies are located in

principal cities. This warranty is valid in the United States and

Canada and void elsewhere. Please consult your classied

telephone directory, your food-service equipment dealer or

contact:

Wells Manufacturing

10 Sunnen Dr., St. Louis MO 63143 USA

phone (314) 678-6314 or fax (314) 781-2714

for information and other details concerning warranty.

LIMITED WARRANTY STATEMENT

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

NOTE: For your protection, please note that equipment

in this shipment was carefully inspected and packaged

by skilled personnel before leaving the factory. Upon

acceptance of this shipment, the transportation company

assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or

express receipt, and that the note of loss or damage is

signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is

unnoticed until the merchandise is unpacked, notify the

transportation company or carrier immediately, and le

“CONCEALED DAMAGE” claim with them. This

should be done within fteen (15) days from the date

the delivery was made to you. Be sure to retain the

container for inspection.

Wells Manufacturing cannot assume liability for damage or

loss incurred in transit. We will, however, at your request,

supply you with the necessary documents to support your

claim.

SHIPPING DAMAGE CLAIM PROCEDURE

1. Resetting of safety thermostats, circuit breakers, over

load protectors, and/or fuse replacements are not

covered by this warranty unless warranted conditions

are the cause.

2. All problems due to operation at voltages or phase other

than specied on equipment nameplates are not covered

by this warranty.

Conversion to correct voltage and/or phase must be

the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements and

wiring diagrams supplied with the equipment are not

covered by this warranty.

4. Replacement of items subject to normal wear, to

include such items as knobs, light bulbs; and,

normal maintenance functions including adjustments

of thermostats, adjustment of micro switches and

replacement of fuses and indicating lights are not

covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied

with each machine. Noted maintenance and

preventative maintenance items, such as servicing

and cleaning schedules, are customer responsibility.

Those miscellaneous adjustments noted are customer

responsibility. Proper attention to preventative

maintenance and scheduled maintenance procedures

will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an

Authorized Service Agency or one of its sub-service

agencies.

8. All labor shall be performed during regular working

hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted for

ninety (90) days from date of purchase on non-warranty

equipment. This parts warranty is limited only to

replacement of the defective part(s). Any use of non-

genuine Wells parts completely voids any warranty.

10. Installation, labor, and job check-outs are not considered

warranty and are thus not covered by this warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability

to perform service are not covered by warranty. This

includes institutional and correctional facilities.

Produkt Specifikationer

Mærke:	Wells
Kategori:	Varmeskuffe
Model:	RWN1

Har du brug for hjælp?

Hvis du har brug for hjælp til Wells RWN1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeskuffe Wells Manualer

14 August 2024

13 August 2024

13 August 2024

12 August 2024

9 August 2024

8 August 2024

8 August 2024

7 August 2024

7 August 2024

7 August 2024

Varmeskuffe Manualer

Nyeste Varmeskuffe Manualer

3 Marts 2025

4 Januar 2025

4 Januar 2025

1 Januar 2025

Bertazzoni WD60Z Manual

31 December 2025

Bertazzoni WD60N Manual

31 December 2025

V-Zug WarmingDrawer V4000 31 Manual

29 December 2024

Miele ESW 6129 Manual

23 December 2024

Miele ESW 6114 Manual

23 December 2024

Bosch BIC7101B1 Manual

22 December 2024