WestBend 72112 Manual


Læs gratis den danske manual til WestBend 72112 (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om WestBend 72112, eller vil du spørge andre brugere om produktet?

Side 1/18
1
WEST BEND®
ELECTRIC SKILLET
Register this and other West Bend® products through our website: www.westbend.com
Recipes and Instructions
To prevent personal injury or property damage, read and follow the instructions and warnings in this care and use
instruction manual.
L-5486
IMPORTANT SAFEGUARDS
Use electricity safely and wisely! Observe safety precautions when using your skillet including the following:
Read all instructions before using.
If the skillet features unassembled handle/legs, be sure they are assembled and fastened properly. See assembly
instructions on page 2.
Always attach heat control to skillet first, then plug cord into wall outlet. After cooking and serving, turn heat control
to “off” and unplug from wall outlet. Let skillet cool before removing heat control.
Do not leave skillet plugged in when it is not being used.
Skillet should always be unplugged before cleaning.
Do not let cord touch hot surfaces or hang over the edge of counter, table or other surface area.
Your skillet and its heat control should not be used outdoors, placed near a hot gas or electric burner or placed in a
heated oven.
Do not immerse heat control, its cord and plug in water or other liquid.
Do not touch skillet or its cover when they are hot. Use handles and knobs for lifting and carrying. Be very careful
when moving skillet if it contains hot liquid. Let cool before pouring out.
Supervise closely when skillet is being used by or near children.
Use your skillet only for cooking tasks described in this booklet. Do not use attachments with your skillet unless
recommended by The West Bend Company.
Do not use your skillet if it or its cord or heat control has been damaged or if it is not working properly. Contact the
West Bend Company Customer Service Department.
SAVE THESE INSTRUCTIONS
Your skillet needs no special care other than cleaning. If servicing becomes necessary, return your skillet to The West
Bend Company. See Warranty information for service details. Do not attempt to repair it yourself.
WARNING: To prevent personal injury or property damage, always unplug this and other appliances when not in use.
For Household use only.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
SPECIAL NOTE: This booklet contains instructions for electric skillets with different styles of covers made of different
materials such as metal or glass. These different covers require special care and handling. Be sure to follow the correct
care and handling instructions for your particular skillet cover.
INSTRUCTIONS FOR USE AND CARE
Clean Before Using.
CAUTION: To prevent personal injury or electric shock, always remove heat control before immersing this product in
water. Do not immerse the heat control its cord and plug in water or other liquid.
2
Wash skillet, cover and rack if included, in hot soapy water with a sponge or dishcloth to remove any manufacturing oils.
Rinse thoroughly, then dry, including terminal pins inside socket of skillet where heat control fits.
Condition the Non-Stick Interior Surface
The non-stick surface must be conditioned to ensure stick-free cooking. Lightly wipe a teaspoon of cooking oil with paper
toweling or a soft cloth over the entire interior surface. Let oil remain on the surface. The skillet is now ready for use.
Assemble Handle/Legs Before Using (unassembled models only).
CAUTION: To prevent personal injury or property damage, be sure handles/legs are securely attached before use. Never
use skillet without attached handle/legs. Make sure that screws are inserted straight into skillet mounting projections for
proper assembly. To prevent stripping of threads do not over tighten screws.
*Handle/Leg Assembly
Parts Included: Position one handle/leg on
2 Handle/Legs side of skillet with socket.
4 Long Screws
2 Leveling Washers
Tool Required:
Common Slotted or Phillips Screwdriver
1. Place skillet upside down on tabletop or countertop.
2. Position first handle/leg on side of skillet with socket, lining up holes in legs with mounting projections on skillet.
See Diagram 1.
3. Using appropriate screwdriver securely attach handle/leg with two of the long screws provided. See Diagram 1.
Repeat Steps 1 and 2 to assemble second handle/leg on opposite side of skillet.
4. To assure proper installation of skillet handle/legs, place assembled skillet right side up on a flat surface and lift with
handles. Handles should feel tightly secured.
5. If the skillet rocks when placed on a flat surface, remove screw on the leg which is not resting on the surface. Install
one of the enclosed washers between the skillet mounting projection and leg. Replace the screw following instructions
3 and 4 above. If the skillet is not level after the addition of the washer, add the second leveling washer in the same
manner to the opposite leg not resting on surface.
SPECIAL SAFEGUARDS FOR GLASS COVER
CAUTION: Failure to follow these instructions may cause immediate or later breakage of glass cover, which can result in
personal injury or property damage. Carefully read and follow the safeguards below:
CAUTION: Glass cover can shatter from direct heat.
DO NOT place cover under broiler, microwave browning element or in a toaster oven.
DO NOT set glass cover on hot burner or on oven heat vent.
DO NOT use cover if it has been used in the above manners even if it does not look damaged. See Warranty section in
this booklet on how to obtain a replacement cover.
CAUTION: Glass cover can shatter if cooled suddenly. Avoid severe temperature change.
DO NOT set hot glass cover on cold or wet surface; let cover cool before placing in water.
ALWAYS handle hot cover with dry oven mitts; do not use wet cloths.
ALWAYS set hot glass cover on dry, heat-protective surface for gradual cooling.
CAUTION: Chips, cracks, or deep scratches weaken the glass cover. Weakened glass can shatter during use.
DO NOT use cover if chipped, cracked or scratched. Discard immediately. See Warranty section in this booklet on
how to obtain a replacement cover.
ALWAYS follow care and use instructions in this booklet to avoid chip, cracks and scratches due to hitting rims, using
metal utensils, using abrasive scouring pads or cleansers or from accidental impact.
CAUTION: To prevent personal injury or steam burns when removing cover from skillet base:
ALWAYS use oven mitts or hot pads when removing or replacing glass cover.
ALWAYS tilt cover toward you to prevent steam burns.


Produkt Specifikationer

Mærke: WestBend
Kategori: Ikke kategoriseret
Model: 72112

Har du brug for hjælp?

Hvis du har brug for hjælp til WestBend 72112 stil et spørgsmål nedenfor, og andre brugere vil svare dig