Western Digital Caviar SE WD800BB Manual

Western Digital Harddisk Caviar SE WD800BB

Læs gratis den danske manual til Western Digital Caviar SE WD800BB (7 sider) i kategorien Harddisk. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Western Digital Caviar SE WD800BB, eller vil du spørge andre brugere om produktet?

Side 1/7
Internal Desktop
WD Caviar®SE
EIDE Hard Drive
Quick Install Guide
EN
-1-
This document was designed to aid in the quick installation of your new WD EIDE hard drive.
For further information regarding the installation and use of your drive, visit our website at
support.wdc.com.
Compatibility
Windows® XP (SP 1 or higher needed for drives >137 GB)
Windows 2000 (SP 3 or higher needed for drives >137 GB)
Windows Me and Windows 98SE (may require an
Ultra ATA controller card)
Mac® OS X v10.2 or later requires a Mac-compatible ATA
controller card (for drives larger than 137 GB)
Note: Compatibility may vary depending on user’s
hardware configuration and operating system.
Unpacking & Drive Handling Information
WD hard drives are precision instruments and should be
handled with care during unpacking and installation. Hard
drives can be damaged by rough handling, shock and
vibration, or electrostatic discharge (ESD). Be aware of the
following precautions:
This product contains no user-serviceable parts; refer
servicing to WD authorized personnel only.
Do not unpack your hard drive until you are ready to
install it. Your hard drive is packaged in an anti-static
bag.
To avoid ESD problems, ground yourself by touching the
metal chassis of the computer before handling the hard
drive. Articles of clothing generate static electricity. Do
not allow clothing to come in direct contact with the hard
drive or circuit board components.
Handle the hard drive by its sides only. Avoid touching
the circuit board components on the bottom of the hard
drive.
Do not drop, shake, or knock down the hard drive.
Do not stack hard drives or stand your WD hard drive on
its edge.
1. Before Getting Started
1. Gather these materials and tools: WD hard drive kit;
standard 40-pin, 80-conductor cable; computer system
manual; operating system manual and installation
diskette/CD; Phillips and flat-blade screwdrivers.
2. Before performing any hardware installation, back up
your existing data.
3. Before handling the hard drive or any other components,
discharge static electricity by touching the metal chassis
of your computer or by using an anti-static wrist strap.
4. Record your WD hard drive serial number, model
number, and date code.
5. Power off the computer and unplug the power cord.
6. Remove the system cover (refer to your system manual
for instructions).
Operating System Information
Installing Your New WD Hard Drive as an Upgrade
From a Previously Installed Hard Drive
To ensure the optimal settings for your drive configuration,
we recommend you run the Installation Tutorial in the
Windows version of Data Lifeguard Tools
prior to the
hardware installation. Data Lifeguard Tools for Windows
will generate your custom installation instructions based on
the configuration you choose. For more information on
using Data Lifeguard Tools, visit our website at
support.wdc.com.
Windows XP (Service Pack 1 or higher) and 2000
(Service Pack 3 or higher)
If you are running one of these operating systems, run the
Data Lifeguard Tools Installation Tutorial, carefully following
the on-screen instructions to set up your larger than 137
GB hard drive without a controller card.
Windows 98SE and Windows Me
If your system does not support 48-bit Logical Block
Addressing (LBA), WD recommends installing an Ultra
ATA controller card to access the full capacity of your hard
drive greater than 137 GB. Make sure that your system
BIOS supports the card and that its drivers have been
properly installed prior to connecting the hard drive. You
can purchase an Ultra ATA/100 PCI controller card at the
WD Online store at store.wdc.com (U.S.A. only) or your
local computer retailer. For more information, visit our
website at support.wdc.com.
Alternate Solution
Intel® offers drivers for certain chipsets which provide BIOS
support for the full capacity of drives larger than 137 GB.
Contact your motherboard or system manufacturer for
compatibility and installation instructions.
WD Hard Drive
Utilities and software CD
Documentation
Mounting Screws and
Jumper Shunt
Kit Contents


Produkt Specifikationer

Mærke: Western Digital
Kategori: Harddisk
Model: Caviar SE WD800BB

Har du brug for hjælp?

Hvis du har brug for hjælp til Western Digital Caviar SE WD800BB stil et spørgsmål nedenfor, og andre brugere vil svare dig