Westinghouse Bendan Manual

Westinghouse Ventilator Bendan

Læs gratis den danske manual til Westinghouse Bendan (24 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Westinghouse Bendan, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

ETL-ES-Bendan-WH12

OWNER'S MANUAL

MANUAL DEL USUARIO

Net Weight: 16.72 LBS

Peso Neto: 7.6 KGS

Bendan

Please write model number here for future reference: /

Por favor, incluya el número del modelo aquí para futura referencia:

Model: GFP Series

ETL-ES-Bendan-WH12

1. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards (ANSI/NFPA 70-1999), including fire-rated construction.

2. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

3. After making the wire connections, gently push connections into outlet box with wire nuts pointing up. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on

one side of the outlet box and ungrounded conductor on the other side of the outlet box.

4. Before you begin installing the fan, switch power off at service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be

locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5. Be cautious! Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

8. To reduce the risk of fire, electric shock, or personal injury, this fan must be mounted to an outlet box marked suitable for fan support, and use the mounting screws provided with the outlet box. (Mounting must

support at least 35 lbs.)

9. WARNING! Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

10. Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to be mounted to an outlet box marked “Acceptable for Fan Support”.

11. WARNING! To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

12. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

13. NEVER place a switch where it can be reached from a tub or shower.

14. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline safety standards such as those

published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

15. Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be

locked, securely fasten a prominent warning device, such as a tag, to the service panel.

16. All set screws must be checked and re-tightened where necessary before installation.

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT",

AND USE THE OUTLET SCREWS PROVIDED WITH THE OUTLET BOX. MOST OUTLET BOXES COMMONLY USED FOR THE SUPPORT OF LIGHTING FIXTURES

ARE NOT ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.

TOOLS REQUIRED

Phillips Screwdriver Wire Cutters Pliers Step Ladder

SAFETY TIPS

Produkt Specifikationer

Mærke:	Westinghouse
Kategori:	Ventilator
Model:	Bendan
Type:	Husholdning ventilator
Vekselstrømsindgangsspænding:	230 V
Vekselstrømsindgangsfrekvens:	50 Hz
Vægt:	7600 g
Produktfarve:	Hvid
Indbygget lys:	Ja
Pakkevægt:	8700 g
Pakkedybde:	325 mm
Pakkebredde:	223 mm
Pakkehøjde:	595 mm
Strømforbrug (typisk):	56 W
Husmateriale:	Glas
Støjniveau:	50 dB
Fjernbetjening inkluderet:	Ja
Certificering:	CE
Placering:	Loft
Luftstrøm:	159 m³/t
Bæredygtighedscertifikater:	RoHS
Ventilator diameter:	1320 mm
Antal ventilatorblade:	5
Blæser, hastighed (maks.):	175 rpm