Westinghouse PWSC16.5 Manual


Læs gratis den danske manual til Westinghouse PWSC16.5 (2 sider) i kategorien Højtryksrenser. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Westinghouse PWSC16.5, eller vil du spørge andre brugere om produktet?

Side 1/2
WARNING
Do not use for commercial use. User must read and understand the user
manual for the pressure washer before using this accessory to reduce the risk
of injury. Before beginning any cleaning activity, spray the pressure stream in
a safe direction to be sure that all accessories are connected properly in order
to minimize the danger of injury or property damage. This product fits most
pressure washers. Before using this attachment, be sure it is compatible and is
correctly installed. Risk of fluid injections. Do not point at people, pets, electrical
devices, or the unit itself. Wear eye protection designated to conform with ANSI
Z87.1. Before adding, replacing, or modifying accessories, turn off the pressure
washer, release the water pressure in the trigger handle, and lock out the trigger
handle (if one is provided with the pressure washer). Use only with cold water
these instructions to train other users and refer to them frequently. Give the user
of the tool these instructions as well.
PRODUCT SPECIFICATIONS
Connection 1/4 in. Quick Connect Plug Inlet .................................................................
Width of Deck 16.5 in. ..................................................................................................
Maximum Pressure up to 3400 psi ...............................................................................
Minimum Pressure 2500 psi ........................................................................................
Maximum Water Flow 2.7 GPM ....................................................................................
Minimum Water Flow 1.1 GPM .....................................................................................
Maximum Water Temperature 140°F ............................................................................
APPLICATIONS
Use this product for the purpose(s) listed below:
l Cleaning decks, sidewalks, and driveways
INSTALLING THE SURFACE CLEANER
See Figure 1.
l If necessary, remove the nozzle from the end of the lance.
l Pull back the quick-connect collar (1) and insert the inlet adapter (2). Push the
quick-connect collar forward to lock.
Be sure the surface cleaner is securely locked into the lance before use.NOTE:
WARNING
Only use the surface cleaner on flat, horizontal surfaces. To reduce the risk of
injection or injury, never lift the surface cleaner from the cleaning surface while
operating the pressure washer.
USING THE SURFACE CLEANER
l Put the surface cleaner on the horizontal surface being cleaned and start the pressure
washer.
l Squeeze the trigger and move slowly to allow the unit to clean the surface
NOTE: Swirling or striping in the cleaned surface indicates moving too quickly. If a
slower pace doesn’t stop the condition, the surface cleaner nozzles may be clogged.
See to clean the nozzles.Nozzle Maintenance
WARNING
Avoid striking any raised obstacles while using the surface cleaner. Damage may
occur to the unit. If contact occurs and a higher vibration of the unit begins
during use, release the trigger and discontinue use. Continuing use could result
in serious injury or damage to the unit.
NOZZLE MAINTENANCE
See Figure 2.
The surface cleaner comes assembled. The nozzles are approved for use with pressure
washers operating at 2500 to 3400 PSI with a maximum flow rate of 2.7 GPM (1.1
GPM minimum).
A pulsing sensation felt while squeezing the trigger and/or a higher vibration in the
surface cleaner may be the result of a clogged or dirty nozzle.
l Turn off the pressure washer and turn off the water supply. Put the unit on the
ground and pull the trigger to release the water pressure in the lance.
l Pull back the quick-connect collar to disconnect the surface cleaner from the lance.
l Use a nozzle cleaning tool (2) to free any foreign materials that are restricting the
nozzle (1).
l Use a garden hose to back-flush the nozzle and force out the debris.
Never point the nozzle outlet at your face.NOTE:
FIG. 1
FIG. 2
Customer Service: (855) 944-3571
777 Manor Park Drive, Columbus, OH 43228
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by MWE Investments, LLC.
© 2024 MWE Investments, LLC All Rights Reserved.
l Reconnect the surface cleaner to the lance.
l Turn on the water supply and start the pressure washer to resume cleaning.
REPLACING THE HIGH-PRESSURE FILTER
See Figure 3.
If the water still doesn’t flow freely after cleaning the deck nozzles, it may be necessary
to replace the high-pressure filter. Replacement filters are available by going to our
parts website at .parts.wpowereq.com
l Turn off the pressure washer and turn off the water supply. Put the unit on the
ground and pull the trigger to release the water pressure in the lance.
l Disconnect the surface cleaner from the lance.
l Insert a slotted screwdriver into the slot of the filter and turn counterclockwise to
remove.
l Insert the new filter (1) into the inlet plug.
l Turn the filter clockwise with the slotted screwdriver until it is inside the inlet adapter
and no longer visible above the top of the adapter.
REPLACEMENT PARTS
For replacement parts, please call customer service.
Nozzle PWSCRN ...........................................................................................................
High-pressure Filter PWSCHPF ....................................................................................
Nozzle Cleaning Tool PWSCCT .....................................................................................
PWSC16.5 PLASTIC SURFACE CLEANER
FOR WESTINGHOUSE PRESSURE WASHERS UP TO 3400 PSI
FIG. 3
PF130000
10/25/24


Produkt Specifikationer

Mærke: Westinghouse
Kategori: Højtryksrenser
Model: PWSC16.5

Har du brug for hjælp?

Hvis du har brug for hjælp til Westinghouse PWSC16.5 stil et spørgsmål nedenfor, og andre brugere vil svare dig