Westinghouse PWSCSS Manual

Westinghouse Højtryksrenser PWSCSS

Læs gratis den danske manual til Westinghouse PWSCSS (2 sider) i kategorien Højtryksrenser. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Westinghouse PWSCSS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
 WARNING
Do not use for commercial use. User must read and understand the
operator’s manual for their pressure washer before using this accessory
to reduce the risk of injury. Before beginning any cleaning activity,
spray the pressure stream in a safe direction to make sure that all
accessories are connected properly in order to minimize the danger
of injury or property damage. Fits most pressure washers. Before
using this attachment, make sure it is compatible and is correctly
installed. Risk of uid injections. Do not point at people, pets, electrical
devices, or the unit itself. Wear eye protection designated to conform
with ANSI Z87.1. Before adding, replacing, or modifying accessories,
turn off the pressure washer, release the water pressure in the trigger
handle, and lock the trigger handle’s lock out (if one is provided with
your pressure washer). Use only with cold water and only outdoors.
Store the accessory indoors. Save these guidelines. Use them to train
other users and refer to them frequently. Give the user of the tool these
instructions as well.
PRODUCT SPECIFICATIONS
Connection 1/4 in. Quick Connect Plug Inlet ..................................................
Width of Deck 16.5 in. ....................................................................................
Maximum Pressure..................................................................up to 4000 psi
Minimum Pressure............................................................................2200 psi
Maximum Water Flow 4.0 GPM ......................................................................
Minimum Water Flow 2.0 GPM .......................................................................
Maximum Water Temperature ..............................................................194°F
Consult your pressure washer’s operator manual for its maximum
operating water temperature.
APPLICATIONS
You may use this product for the purpose(s) listed below:
l Cleaning decks, sidewalks, and driveways
INSTALLING THE SURFACE CLEANER
l If necessary, remove the nozzle from the end of the lance.
l Pull back the quick-connect collar and insert the inlet adapter. Push the
quick-connect collar forward to lock.
Be sure the surface cleaner is securely locked into the lance before
use.
 WARNING
Only use the surface cleaner on at, horizontal surfaces. To reduce the
risk of injection or injury, never lift the surface cleaner from the cleaning
surface while operating the pressure washer.
USING THE SURFACE CLEANER
l Place the surface cleaner on the horizontal surface being cleaned and start
the pressure washer.
l Squeeze the trigger and move slowly allowing the unit to clean the surface
Swirling or striping in the cleaned surface indicates you may be
moving too quickly. If a slower pace doesn’t stop the condition, the surface
cleaner nozzles may be clogged. See to clean the Nozzle Maintenance
nozzles.
 WARNING
Avoid striking any raised obstacles while using the surface cleaner as
damage may occur to the unit. If contact occurs and a higher vibration
of the unit begins during use, release the trigger and discontinue use.
Continuing use could result in serious injury or damage to the unit.
NOZZLE MAINTENANCE
The surface cleaner comes assembled. The nozzles are approved for use
with pressure washers operating at 2200 to 4000 PSI with a maximum ow
rate of 4.0 GPM (2.0 GPM minimum).
A pulsing sensation felt while squeezing the trigger and/or a higher vibration
in the surface cleaner may be the result of a clogged or dirty nozzle.
FIG. 1
FIG. 2
A - Inlet adapter [adaptador de entrada, adaptateur d’entrée]
B - Quick connect coupler [acoplador de conexión rápida, coupleur à connexion
rapide]
A
B
777 Manor Park Drive, Columbus, OH 43228
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by MWE Investments, LLC.
© 2023 MWE Investments, LLC All Rights Reserved.
l Turn off the pressure washer and shut off the water supply. Place unit on
the ground and pull the trigger to release the water pressure in the lance.
l Pull back the quick-connect collar to disconnect the surface cleaner from
the lance.
l Use a nozzle cleaning tool or a ne needle to free any foreign materials
that are clogging or restricting the nozzle.
l Use a garden hose to back-ush the nozzle and force out the debris.
Never point the nozzle outlet at your face.
l Reconnect the surface cleaner to the lance.
l Turn on the water supply and start the pressure washer to resume cleaning.
REPLACING THE FILTER SCREEN
If the water still doesn’t ow freely after cleaning the deck nozzles, it may be
necessary to replace the lter screen. Replacement lter screens are available
by calling our Service Hotline at (855)944-3571.
l Turn off the pressure washer and shut off the water supply. Place unit on
the ground and pull the trigger to release the water pressure in the lance.
l Disconnect the surface cleaner from the lance.
l Using a screwdriver or pair of tweezers, remove the retaining ring and lter
screen from the inlet plug.
l Once the lter screen is removed from the inlet plug, replace it with a new
lter screen (not included).
l Make sure the lter screen is seated inside the inlet adapter and no longer
visible above the top of the adapter.
l Reinstall the retaining ring and push into place until it is secure against the
lter screen.
REPLACEMENT PARTS
Replacement parts are available from our Service Hotline at (855) 944-3571.
Nozzle...................................................................................... BSSC165A01
Filter Screen BSSC165A02 ............................................................................
PWSCSS SURFACE CLEANER
FOR WESTINGHOUSE PRESSURE WASHERS UP TO 4000 PSI
FIG. 3
A
B
FIG. 4
A - Nozzle [boquilla,
buse]
B - Nozzle cleaner
[limpiador de
boquillas, nettoyeur
de buse]
BSSC165M01 11/2/23 (REV:01)

Produkt Specifikationer

Mærke: Westinghouse
Kategori: Højtryksrenser
Model: PWSCSS

Har du brug for hjælp?

Hvis du har brug for hjælp til Westinghouse PWSCSS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højtryksrenser Westinghouse Manualer

Westinghouse

Westinghouse WPX3000 Manual

20 August 2025
Westinghouse

Westinghouse WPX3400e Manual

7 August 2025
Westinghouse

Westinghouse WPX2300e Manual

7 August 2025
Westinghouse

Westinghouse WPX2700e Manual

7 August 2025
Westinghouse

Westinghouse WPX3200e Manual

6 August 2025
Westinghouse

Westinghouse WPX3000e Manual

6 August 2025
Westinghouse

Westinghouse ePX3030 Manual

10 Juli 2025
Westinghouse

Westinghouse PWSC16.5 Manual

9 Juli 2025
Westinghouse

Westinghouse PWTN Manual

17 December 2024
Westinghouse

Westinghouse PWUC Manual

17 December 2024

Højtryksrenser Manualer

Nyeste Højtryksrenser Manualer

Lavor

Lavor Thermic 10.1 Manual

3 November 2025
Simpson

Simpson Powerwasher PW61431 Manual

2 November 2025
Simpson

Simpson Powerwasher PW61429 Manual

2 November 2025
Simpson

Simpson SuperPro SRC5040141E Manual

30 Oktober 2025
Euromac

Euromac Force 1400 Manual

9 Oktober 2025
Stanley

Stanley FatMax SXPW20E Manual

1 Oktober 2025
Simpson

Simpson Pro Series PS61433 Manual

29 September 2025
Einhell

Einhell HYPRESSO 36/105 Manual

28 September 2025
Simpson

Simpson SuperPro SW4440SCBDM-S Manual

28 September 2025
Simpson

Simpson SuperPro SRC7040133E Manual

24 September 2025