GB AWM 9100 PROGRAMME CHART
5019 301 15169
Whirlpool is a registered trademark of Whirlpool USA
Programme
Care
labels
Type of wash/Notes
Max.
Load
kg
Detergents and additives Special Options Spin
Speed
max
Te m p e r a t u r e
°C
max
Softener Bleach Main
Wash
Prewash Start
Delay
Pre-
wash
Stain
Tr e a t
Auto
Soak
2nd
Rinse
Extended
Spin
Sanitary
For heavily soiled colourfast cotton which needs sanitization.
This programme complies to the UK Care Standard Act 2000
(CSA) Standard 26.
9.0
❉❉
Ye s
❉❉❉❉❉ ❉ ❉
1000 Max
White Cotton
For white cotton loads which you would like to bleach. An
additional rinse provides optimal rinse performance to avoid
chlorine residues on your laundry.
9.0
❉❉
Ye s
❉❉❉❉❉ ❉ ❉
1000 60
Heavy Duty
For normally soiled, sturdy and colourfast cotton. Use Stain
Treat option for optimal removal of organic stains like blood,
egg yolk etc.
9.0
❉❉
Ye s
❉❉❉❉❉ ❉ ❉
1000 60
Normal/Casual
For no-iron fabrics such as sport shirts, permanent press
blends, cotton and linens.
3.5
❉❉
Ye s
❉❉❉❉❉ ❉ ❉
1000 60
Express Wash
For slightly soiled overalls and sports wear made of cotton,
polyester, polyamide and blends with cotton.
2.0
❉❉
Ye s —
❉
——
❉❉ ❉
1000 60
Delicate
For curtains, delicate dresses, skirts, shirts and blouses.
2.5
❉❉
Ye s
❉❉❉
—
❉❉
— 800 50
Silk
For washable silk. Check care label instructions to make sure
that garment is identified as machine washable.
2.0
❉
—Yes—
❉
———
❉
—0 50
Wool
For washable wool. Check care label instructions to make
sure that garment is identified as machine washable.
2.0
❉
—Yes—
❉
———
❉
— 800 50
Ultra Handwash For handwashable and special-care garments.
2.0
❉
—Yes—
❉
———
❉
— 600 50
Rinse / Spin
—
For a rinse and an extra high speed spin. If you wish you can
reduce the speed.
9.0
❉
———
❉
———
❉❉
1000 50
Drain / Spin
—
For draining the washer with an additional extra high speed spin.
If you wish you can reduce the speed.
9.0
————
❉
——— —
❉
1000 —
A. Programme Sequence Indicator
B. Wash Cycles
C. “Start” Button
D. “Start Delay” button
E. Options
F. “Water Temperature” Modifier
G. “Spin Speed” Modifier
H. “End of Cycle” Signal Modifier
I. “Pause/Reset” Button
J. “Soil Level” Modifier
When you select an option an indicator lights
up.
If an option is not recommended for the
selected programme, the indicator light will
not light up and a warning sound advises that
this option is not possible.
If an option is selected after the programme
has started a sound will indicate that it is not
possible to select it at this stage.
❉
: optional / yes: dosing required.
E
F
B
C
A
D
{
G H
I
J
