Whirlpool OMR555RR0X Manual

Whirlpool Ovn OMR555RR0X

Læs gratis den danske manual til Whirlpool OMR555RR0X (20 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Whirlpool OMR555RR0X, eller vil du spørge andre brugere om produktet?

Side 1/20
EN
Quick guide
SLIDING SHELVES AND SHELF GUIDES
Before using the oven remove the protective tape [a] and then
remove the protective foil [b] from the sliding runners.
REMOVING THE SLIDING RUNNERS [c]
Pull the lower part of the sliding runner to uncouple the lower
hooks (1) and pull the the sliding runners upwards, removing
them from the upper hooks (2).
REFITTING THE SLIDING RUNNERS [d]
Hook the upper hooks on the shelf guides (1) then press the
lower part of the sliding runners against the shelf guides, until
the lower hooks are clicking (2).
1
21
2
[c] [d]
REMOVING AND REFITTING THE SHELF GUIDES
1. To remove the shelf guides,rmly grip the external part of
the guide, and pull it towards you to extract the support and
the two internal pins from the lodging.
2. To reposition the shelf guides, position them near the cavity
and initially insert the two pins into their lodgings. Next,
position the external part near its lodging, insert the support,
and rmly press towards the wall of the cavity to make sure
the shelf guide is properly secured.
FIRST TIME USE
1. SETTING THE TIME
You will need to set the time when you switch on the
appliance for the rst time: Press until the icon and the
two digits for the hour start ashing on the display.
Use or to set the hour and press to conrm. The
two digits for the minutes will start ashing. Use or to
set the minutes and press to conrm.
Please note: When the icon is ashing, for example following
lengthy power outages, you will need to reset the time.
2. SET THE POWER CONSUMPTION
By default the oven is programmed to work at a power
higher than 3 kW (Hi): To operate the oven at a power that is
compatible with a domestic power supply less than 2,9 kW
(Lo), you will need to change the settings.
To go to the change menu, turn the selection knob to ,
then turn it back to .
CONTROL PANEL DESCRIPTION
1 32 4 5 6
1. SELECTION KNOB
For switching the oven on by selecting
a function. Turn to position to switch
the oven o.
2. LIGHT
With the oven switched on, press
to turn the oven compartment lamp on
or o.
3. SETTING THE TIME
For accessing the cooking time settings,
delayed start and timer.
For displaying the time when the oven
is o.
4. DISPLAY
5. ADJUSTMENT BUTTONS
For changing the cooking time settings.
6. THERMOSTAT KNOB
Turn to select the temperature you require
when activating manual functions.
Please note: Type of knobs may vary from
model type. If the knobs are push-activated,
push down on the center of the knob to
release it from seating.
THANK YOU FOR BUYING A WHIRLPOOL
PRODUCT
In order to receive a more complete
assistance, please register your product on
www . whirlpool . eu/register
Before using the appliance carefully read the Safety
Instruction.
FUNCTIONS & DAILY USE
CONVENTIONAL
For cooking any kind of dish on one shelf only.
RISING
For helping sweet or savoury dough to rise eectively.
Turn the thermostat knob to the icon to activate this function.
CONVECTION BAKE
For cooking dierent foods that require the same
cooking temperature on several shelves (maximum three) at
the same time. This function can be used to cook dierent
foods without odours being transferred from one food to
another.
PIZZA
For baking dierent types and sizes of pizza and bread.
It is a good idea to swap the position of the baking trays
halfway through cooking.
ECO CONVECTION BAKE
For cooking roasts and stued roasting joints on a
single shelf. Food is prevented from drying out excessively by
gentle, intermittent air circulation.
When this ECO function is in use, the light will remain
switched o during cooking but can be switched on again by
pressing .
GRILL
For grilling steaks, kebabs and sausages, cooking
vegetables au gratin or toasting bread.
When grilling meat, we recommend using a DRIP TRAY to
collect the cooking juices: position the pan on any of the
levels below the wire shelf and add 200 ml of drinking water.
TURBO GRILL
For roasting large joints of meat (legs, roast beef,
chicken). We recommend using a DRIP TRAY to collect the
cooking juices: position the pan on any of the levels below the
wire shelf and add 200 ml of drinking water.
FLEXI CLEAN PACK
SMAR TCLEAN
The action of the steam released during this special
low-temperature cleaning cycle allows dirt and food residues
to be removed with ease. To activate the Smart Clean”
function, pour 100-120ml of drinking water on the bottom
of the oven and only then turn the selection knob and
the thermostat knob to the icon. Activate the function
when the oven is cold. The position of the icon . Does not
correspond to the temperature reached during the cleaning
cycle.
AUTOMATIC CLEANING - PYRO
For eliminating cooking spatters using a cycle at very
high temperature. To activate this function move thermostat
knob to .
The position of the icon does not correspond to the real
temperature reached during the cleaning cycle.
1. SELECT A FUNCTION
To select a function, turn the selection knob to the symbol
for the function you require: the display will light up and an
audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the thermostat
knob to set the temperature you require.
Please note: During cooking you can change the function by
turning the or adjust the temperature by turning the selection knob
thermostat knob. The function will not start if the thermostat knob
will be on position. You can set the cooking time, cooking
end time (only if you set a cooking time) and a timer.
RISING
To start the “Rising function, turn the thermostat knob
to Rising position (40 deg) and put function knob in
Conventional position; if the oven is set to a dierent
temperature, the function will not start.
Please note: You can set the cooking time, cooking end time (only if
you set a cooking time) and a timer.
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a ashing icon
on the display indicate that the preheating phase has
been activated.
At the end of this phase, an audible signal and thexed icon
on the display will indicate that the oven has reached
the set temperature: at this point, place the food inside and
proceed with cooking.
Please note: Placing the food in the oven before preheating has
nished may have an adverse eect on the nal cooking result.
Press and hold and forve seconds immediately
afterwards.
Use or to change the setting, then press and hold for
at least two seconds to conrm.
3. HEAT THE OVEN
A new oven may release odours that have been left behind
during manufacturing: this is completely normal.
Before starting to cook food, we therefore recommend heating
the oven with it empty in order to remove any possible
odours. Remove any protective cardboard or transparentlm
from the oven and remove any accessories from inside it.
Heat the oven to 250 °C for about one hour. The oven must be
empty during this time.
Please note: It is recommended to ventilate the room after using
the appliance for the rst time.


Produkt Specifikationer

Mærke: Whirlpool
Kategori: Ovn
Model: OMR555RR0X

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool OMR555RR0X stil et spørgsmål nedenfor, og andre brugere vil svare dig