Whirlpool WCC48HMSXA Manual

Whirlpool Ovn WCC48HMSXA

Læs gratis den danske manual til Whirlpool WCC48HMSXA (64 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Whirlpool WCC48HMSXA, eller vil du spørge andre brugere om produktet?

Side 1/64
EN
Owner’s Manual
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . register10 . eu
PLEASE SCAN THE QR CODE ON
YOUR APPLIANCE IN ORDER TO
REACH MORE INFORMATION
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
1. Control panel
2. Cavity Fan
(not visible) and
Circular heating element
(not
visible)
3. Ladder racks
(the level is indicated on the front
of the oven)
4. Door
5. Upper heating element/grill
6. Lamp
7. Food probe insert point
(if present)
8. Identification plate
(do not remove)
9. Lower heating element
(not visible)
CONTROL PANEL
1 2 3 54 986 7
1. LEFT-HAND DISPLAY
2. LAMP ON/OFF
For switching the lamp on and off
to save energy in long cooking
cycles.
3. ON/OFF
For switching the oven on and off
and for stopping an active function
at any time.
4. BACK
For returning to the previous step.
A long press (5s) enable/disable
the Keylock function.
5. ROTARY KNOB / 6
th
SENSE
BUTTON
Turn this to navigate through
the functions and adjust all of
the cooking parameters. Press
to select, set, access or confirm
functions or parameters and
eventually start the cooking
program.
6. TEMPERATURE
To adjust the temperature or grill
level.
7. START
For starting functions and
confirming settings.
8. TIME
For setting the time as well as
setting or adjusting the cooking
time.
9. RIGHT-HAND DISPLAY
1
5
9
8
6
3
4
7
2
ACCESSORIES
WIRE SHELF BAKING TRAY
SLIDING SHELVES
RAILS*
(ONLY IN SOME MODELS)
The number of accessories may vary depending on which model is purchased.
*Other accessories can be purchased separately from the After-sales Service.
SLIDING RUNNERS AND LADDER RACKS
Before using the oven remove the protective tape
[a] and then remove the protective foil [b] from the
sliding runners.
REMOVING THE SLIDING RUNNERS [c]
Pull the lower part of the sliding runner to uncouple
the lower hooks (1) and pull the sliding runners
upwards, removing them from the upper hooks (2).
REFITTING THE SLIDING RUNNERS [d]
Hook the upper hooks on the ladder racks (1) then
press the lower part of the sliding runners against the
ladder racks, until the lower hooks are clicking (2).
1
2
1
2
[c] [d]
REMOVING AND REFITTING THE LADDER RACKS
1. To remove the ladder racks, firmly grip the external
part of the guide, and pull it towards you to
extract the support and the two internal pins from
the lodging.
2. To reposition the ladder racks, position them near
the cavity and initially insert the two pins into
their lodgings. Next, position the external part
near its lodging, insert the support, and firmly
press towards the wall of the cavity to make sure
the ladder racks is properly secured.


Produkt Specifikationer

Mærke: Whirlpool
Kategori: Ovn
Model: WCC48HMSXA

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WCC48HMSXA stil et spørgsmål nedenfor, og andre brugere vil svare dig