Whirlpool WH6IB16AM6T0 Manual

Whirlpool Opvaskemaskine WH6IB16AM6T0

Læs gratis den danske manual til Whirlpool WH6IB16AM6T0 (44 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Whirlpool WH6IB16AM6T0, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/44
EN
Quick Guide
1
THANK YOU FOR BUYING AWHIRLPOOL PRODUCT.
In order to receive amore complete assistance, please
register your appliance on: www.whirlpool.eu/register
SETTING MENU
1. Switch on the appliance by pressing the ON-OFF button.
2. Hold the Settings (Half Load ) button for 3 seconds, until you hear
a beep and the display shows „SEt”.
3. After one second the rst available setting (letter „ ”) will be displayed.
4. Press PREVIOUS /NEXT to scroll through the list of available settings
(see table below), then press START/Pause to view and change the
value of the currently selected setting.
5. Press PREVIOUS /NEXT to change the value, then press START/Pause
to save the new value or return to the main menu.
6. To change another setting, repeat points 4 and 5.
7. Press ON-OFF or wait 30 seconds to exit the menu.
LETTER
SETTING
VALUES
(Default - in bold)*
Cycle Counter - number of washing cycles
carried out by the dishwasher.
Eg. 25 cycles: 025;
Eg. 13.947 cycles:
13_947
(scrolling
for 3 times)
Water Hardness Level (see “SETTING THE WA-
TER HARDNESS” and “WATER HARDNESS TABLE”)
1 | 2 | 3 | 4 | 5
Rinse Aid Level
(see “ADJUSTING THE DOSAGE OF RINSE AID”)
0 | 1 | 2 | 3 | 4 | 5
NaturalDry (see “OPTIONS AND FUNCTIONS”)
“1” = On, “0” = O
1 | 0
Time on the oor (see “OPTIONS AND FUNCTIONS”)
“1” = On, “0” = O
1 | 0
Sound
“1” = On, “0” = O
1 | 0
Factory Settings - press START/Pause to re-
store to the factory default all the values of the
settings included in the settings menu.
-
*) The default value does not apply to the Cycle Counter.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on
the dishes and on the machine’s functional components.
The salt reservoir is located in the lower part of the dish-
washer (under the lower rack on the left side).
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
• Salt must be lled when the SALT REFILL indicator light on the control
panel is lit.
1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Position the funnel (see gure) and ll the salt reservoir right up to its
edge (approximately 0,5 kg); it is not unusual for alittle water to leak out.
3. Only the rst time you do this: ll the salt reservoir with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Run aprogram every time as soon as you completed relling the salt
reservoir to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on the heater, contributing also to better cleaning ef-
ciency. This system regenerates itself with salt, therefore it is required
to rell the salt container when empty.
The frequency of regeneration depends on the water hardness level setting
- regeneration takes place once per 4-6 Eco cycles with the water hardness
level set to 3. The regeneration process occurs at the beginning of the cycle
with additional fresh water.
• Single regeneration consumes ~3 L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
B
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dis-
penser Ashould be lled when the RINSE AID REFILL
indicator light in the control panel is lit.
1. Open the dispenser B by pressing and pulling up
the tab on the lid.
2. Pour in the rinse aid (max. 110 ml), making sure it
does not overow from the dispenser. If this hap-
pens, clean the spill immediately with adry cloth.
3. Press the lid down until you hear aclick to close it.
NEVER pour the rinse aid directly into the appli-
ance tub.
D
C
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening
device C. Introduce the detergent into the dry dis-
penser D only. Place the amount of detergent for
pre-washing directly inside the tub.
1. When measuring out the detergent refer to the
mentioned earlier information to add the proper
quantity. Inside the dispenser D, there are indica-
tions to help the detergent dosing.
2. Remove detergent residues from the edges of the dispenser and close
the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing
device is secured in place.
The detergent dispenser automatically opens up at the right time accord-
ing to the program.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
CONTROL PANEL
PLEASE SCAN THE QR CODE
ON YOUR APPLIANCE IN
ORDER TO HAVE MORE
DETAILED INFORMATION
FIRST TIME USE
More information in the Daily Reference Guide on website.
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
1. ON-OFF/Reset button with indicator light
2. PREVIOUS program button
3. NEXT program button
4. FAVOURITE program button
with indicator light
5. Salt reservoir empty indicator light
6. Rinse Aid reservoir empty indicator light
7. DESCALE indicator light
8. Closed Water Tap indicator light
9. Display
10. Program number and remaining time indicator
11. Power Clean Pro option button with indicator light
12. Half Load option button with indicator light/ Settings - 3 sec. press
13. Extra Dry option button with indicator light
14. Delay option button with indicator light
15. START/Pause button with indicator light
W11553946 panel 2023-01-17
W11572189 button R 2021-10-01
W11572083 button L 2022-02-15
W11569647 display 2023-02-17
1 2 3 4 5 6 7 8 9 10
11 12 13
14
15
P
3 sec.
21
65°
3 4 5 6 7 8 9 10
50 °
Eco
65°
A
55°
A
50°
A
45°
65°
SELF CLEAN
DISPLAY ON THE FLOOR
1
3
2
1. Delay Time on the oor - indicator of the time
left to the start of the cycle, when the Delay
option is set
2. Salt reservoir empty - indicator light on the
oor
3. Remaining Time on the oor - indicator of the
time left to the end of the cycle

Produkt Specifikationer

Mærke: Whirlpool
Kategori: Opvaskemaskine
Model: WH6IB16AM6T0

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WH6IB16AM6T0 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Opvaskemaskine Whirlpool Manualer

Whirlpool

Whirlpool WIC3C34PE Manual

14 November 2025
Whirlpool

Whirlpool W0ID561S Manual

13 November 2025
Whirlpool

Whirlpool WDT745SASZ Manual

12 November 2025
Whirlpool

Whirlpool WH3UC10BS7A0W Manual

7 November 2025
Whirlpool

Whirlpool WIP 4T233 PFEG B Manual

3 November 2025
Whirlpool

Whirlpool WH6UC14BN7A0X Manual

1 November 2025
Whirlpool

Whirlpool WH6UC14BN7A0W Manual

30 Oktober 2025
Whirlpool

Whirlpool W8F HP51BS Manual

8 Oktober 2025
Whirlpool

Whirlpool W8F HP51X Manual

8 Oktober 2025
Whirlpool

Whirlpool W8F HS61BS Manual

8 Oktober 2025

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Arçelik

Arçelik 6586 SC Manual

11 December 2025
Siemens

Siemens SN63EX22AE Manual

11 December 2025
Arçelik

Arçelik 6386 SC Manual

11 December 2025
Siemens

Siemens SX65ZX01CH Manual

11 December 2025
Siemens

Siemens SR63EX25KE Manual

11 December 2025
Arçelik

Arçelik 6343 S Manual

11 December 2025
Siemens

Siemens SR63EX24KE Manual

11 December 2025
Siemens

Siemens SX53ES22CE Manual

11 December 2025
Siemens

Siemens SR63HX74ME Manual

11 December 2025
Siemens

Siemens SN55ZS07CE Manual

11 December 2025