Whirlpool WP 88 Manual

Whirlpool Opvaskemaskine WP 88

Læs gratis den danske manual til Whirlpool WP 88 (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Whirlpool WP 88, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Whirlpool is a registered trademark of Whirlpool USA

5019 396 01167

WP 88

Before using the dishwasher, read the

installation and maintenance instructions carefully!

1) Programme data obtained in conformity with European standard EN 50242. The data may vary, for example, according to

different loads, extra functions, sensor settings (only with sensor programmes), water supply temperatures, water hardness

and power supply voltage.

2) Programme for energy data label in conformity with EN 50242. - Information for Test Laboratories:

for more detailed information

on the conditions of the EN comparison test and other tests, contact the following address: “nk_customer@whirlpool.com”.

1. OVERVIEW

On button

Off button

Fault indication and wash time display

With “Delayed start” selected, it indicates the time

remaining until the start of the programme (hh). Toward

the end of the programme, during the drying cycle, the

display will indicate the time remaining in minutes.

If “F..” – appears on the display, see chapter 5 “What to do if…”.

elayed start button

The wash cycle can be programmed to start after 1- 24

hours. (With each successive touch of the button, the

delayed start indicator increases by 1 hour, and after 24

returns to 00).

Then press the START button. The wash programme

will start after the set time.

Detergent setting upon initial use and when using a different type of

detergent

1. Press and hold down the program selector, then press the Delayed Start

button. The last detergent type selected will be shown on the display.

2. With the Delayed Start button, set the required detergent

(“--” = powder, “2 l” = 2 in 1, “3 l” = 3 in 1, “A l” = all the other

combined detergents) (in this way the rinse aid and salt level

indicator lamps are deactivated). The type of detergent selected

will be shown on the display.

3. Wait 5 seconds or switch off the appliance, the selected detergent

type is memorised. It is shown on the display for about 3 seconds

after switching on. Note that only after changing the detergent type

it is possible to select the desired programme and, if necessary,

select the delayed start button.

Programme selector

Press the button (repeatedly) until the indicator of the

required programme lights up.

START button

The indicator lights up during operation, flashes if a fault

occurs and goes off at the end of the programme.

START

button RESET function:

Press this button for at least 2 seconds and the started

programme and the extra functions selected are cancelled.

The main fault indications (repeated flashing of the START

indicator) can be cancelled with a RESET. Detailed

instructions are given in chapter 5 “What to do if...”.

Rinse aid level indicator and salt level indicator

These indicator lamps light up when rinse aid or salt

need to be added.

Only add just before starting a wash cycle.

Table 1.1.

Programme Table

Detergent

dispenser

Consumption

Programmes

Available

options

Description of

programme

large small Litres kWh Minutes

Sensor Intensive 60-70°C

Recommended programme

for heavily soiled crockery,

with dried-on food, e.g. pots

and pans.

X X 13-20 1.10-2.00 100-150 ±

Sensor Normal 40-55°C

Automatic program for

routine washes, for crockery

with no dried-on food (not for

EN 50242).

X X 10-13 0.80-1.05 60-120 ±

Eco

50°C

Normally soiled crockery. X X 12.0 1.05 170 ±

Half Load 50°C

Ideal for washing a half load of

lightly or normally soiled

crockery.

X X 10.0 1.04 145 ±

Power Clean 70°C

Recommended programme

for heavily soiled crockery,

particularly suitable for pots

and pans. Intensive wash with

additional water jets.

X X 16.0 1.80 220 ±

Produkt Specifikationer

Mærke:	Whirlpool
Kategori:	Opvaskemaskine
Model:	WP 88

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WP 88 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Opvaskemaskine Whirlpool Manualer

Whirlpool ADPU 3004 Manual

25 December 2025

Whirlpool ADP 4529 WH Manual

25 December 2025

Whirlpool WFC 3C26 P Manual

25 December 2025

Whirlpool WFC3C26 Manual

25 December 2025

Whirlpool WP 88 Manual

25 December 2025

Whirlpool WUIE2B19 Manual

25 December 2025

Whirlpool ADP 7570 IX Manual

25 December 2025

Whirlpool ADG 555 IX Manual

25 December 2025

Whirlpool ADP 650 WH Manual

23 December 2025

Whirlpool ADP 6949 C IX Manual

23 December 2025

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Bosch SMS2HTI19E Manual

25 December 2025

Siemens SK26E82208 Manual

24 December 2025

Siemens SX67E800BE Manual

24 December 2025

Aspes AJ13601EDX Manual

24 December 2025

Bosch SMV4EMX01N Manual

23 December 2025

PITSOS DVF61X02 Manual

23 December 2025

Bosch SMV4HTX00N Manual

23 December 2025

Siemens SN65ZX09CE Manual

23 December 2025

Fulgor Milano F7DWS24FI1 Manual

23 December 2025

Fulgor Milano F7DWT24FI1 Manual

23 December 2025