Wolf WX36-6B Manual

Wolf Ovn WX36-6B

Læs gratis den danske manual til Wolf WX36-6B (9 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Wolf WX36-6B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

WX RANGE

WX24

WX36

WX60

WX60F

- NOTICE -

This Manual is prepared for the use of trained Hobart Service Technicians and should not

be used by those not properly qualified.

This manual is not intended to be all encompassing. If you have not attended a Hobart Service

School for this product, you should read, in its entirety, the repair procedure you wish to

perform to determine if you have the necessary tools, instruments and skills required to

perform the procedure. Procedures for which you do not have the necessary tools,

instruments and skills should be performed by a trained Hobart Service Technician.

The reproduction, transfer, sale or other use of this manual, without the express written

consent of Hobart, is prohibited.

This manual has been provided to you by ITW Food Equipment Group LLC ("ITW FEG")

without charge and remains the property of ITW FEG, and by accepting this manual you agree

that you will return it to ITW FEG promptly upon its request for such return at any time in the

future.

SERVICE MANUAL

F45992 (1123)

WOLF IS A DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH POINT BLVD., BALTIMORE, MD 21222

TABLE OF CONTENTS

1. GENERAL ............................................................................................... 3

INTRODUCTION ....................................................................................... 3

SPECIFICATIONS ...................................................................................... 3

INSTALLATION, OPERATION AND CLEANING ......................................................... 3

TOOLS ................................................................................................. 3

LUBRICATION ......................................................................................... 3

2. REMOVAL AND REPLACEMENT PARTS .........................................................

MANIFOLD COVER .................................................................................... 4

KICK PANEL ........................................................................................... 4

STANDARD OVEN PILOT ASSEMBLY AND THERMOCOUPLE ......................................... 4

STANDARD OVEN BURNER & ORIFICE HOOD ........................................................ 6

OVEN THERMOSTAT .................................................................................. 7

TOP BURNER PILOT VALVE ........................................................................... 8

TOP BURNER CONTROL VALVE ...................................................................... 8

TOP BURNER ASSEMBLY ............................................................................. 9

OVEN DOOR ......................................................................................... 10

DOOR STOP .......................................................................................... 13

GAS PRESSURE REGULATOR ....................................................................... 13

GRIDDLE PILOT ASSEMBLY AND THERMOCOUPLE ................................................. 14

GRIDDLE BURNER ORIFICE HOOD .................................................................. 15

3. SERVICE PROCEDURES, TEST AND ADJUSTMENTS ...................................

TOP BURNER PILOT ADJUSTMENT .................................................................. 16BURNER AIR SHUTTER ADJUSTMENT ............................................................... 16BURNER NOZZLE CHECK ............................................................................ 16OVEN THERMOSTAT BY-PASS FLAME ADJUSTMENT ............................................... 16OVEN THERMOSTAT TEMPERATURE CALIBRATION ................................................ 17THERMOCOUPLE TEST .............................................................................. 18 OPERATION ........................PILOT CHECKS ..................THERMOCOUPLE CHECKS4. FIRMWARE / SOFTWARE .............................................................................. 20FIRMWARE / SOFTWARE ............................................................................ 205. PROGRAMMING ....................................................................................... 21PROGRAMMING ...................................................................................... 216. ELECTRICAL OPERATION ............................................................................. 2COMPONENT LAYOUT AND FUNCTION .............................................................. 237. SEQUENCE OF OPERATION ........................................................................... 2SEQUENCE OF OPERATION ......................................................................... 258. DIAGRAMS ............................................................................................. 26DIAGRAMS ........................................................................................... 269. TROUBLESHOOTING .................................................................................. 27TROUBLESHOOTING ................................................................................. 27WX RANGE F45992 (1123)Page 2 of 27