Workzone Heavy Duty Chipboard Shelving Manual

Workzone Ikke kategoriseret Heavy Duty Chipboard Shelving

Læs gratis den danske manual til Workzone Heavy Duty Chipboard Shelving (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 78 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 39.5 anmeldelser. Har du et spørgsmål om Workzone Heavy Duty Chipboard Shelving, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
DESCRIPTION OF SIGNAL WORDS
WARNING indicates a hazardous
situation that, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous
situation that, if not avoided, could
result in minor or moderate injury.
NOTICE indicates information
considered important, but not
hazardrelated (e.g. messages
related to property damage).
Heavy Duty Shelving Unit
Introduction
Congratulations on the purchase of your new
shelving unit. You have purchased a high-quality
shelving unit. Please familiarize yourself with the
shelving unit before assembling it. Read and follow these
assembly instructions and the safety messages. Only use
the shelving unit as specied and for the indicated pur-
poses. Keep these assembly instructions in a safe loca-
tion. If you pass the shelving unit on to others, always
include these assembly instructions.
Intended Use
The shelving unit is intended for storage. The shelving
unit is only intended for private indoor use. Use only the
enclosed mounting hardware and never modify the shelv-
ing unit since this can result in injuries and / or damage the
shelving unit. The manufacturer assumes no liability for in-
juries and damage due to improper use. The shelving unit
is not intended for commercial use.
Never leave children unattended! The shelving
unit is not intended for climbing or playing! Do not allow
people, especially children, to climb on or lean against
the shelving unit. This may result in death, injuries
and / or damage.
Contents / Parts Description
8 x 1 Upright
10 x 2 Cross piece (35.59 inch x 20.67 inch/
904 mm x 52.5 mm)
10 x 3 Cross piece (17.48 inch x 20.67 inch/
444 mm x 52.5 mm)
8 x 4 Connector piece
8 x 5 End cap
5 x 6 Shelf
2 x 7 Countersunk head screw (6 x 1.97 inch/6 x 50 mm)
2 x 8 Plain washer
2 x 9 Dowel
9 8 7
5 46
3
3
122
Dimensions / Material
The heavy duty shelving unit can be assembled
vertically or horizontally.
Vertical assembly:
36.22 x 70.86 x 18.11 inch /
92 x 180 x 46 cm
Horizontal
assembly:
70.86 x 36.22 x 18.11 inch /
180 x 92 x 46 cm
Material:
Shelves: wood
Braces, connectors,
crossbars: metal
HEAVY DUTY SHELVING UNIT
Assembly instructions 01 / 17
The arrows indicate work steps you have to take.
AFTER SALES SUPPORT
Model: Heavy Duty Shelving Unit 305 704 3882 www.tkt-usa.com
Corner brackets: plastic
Maximum weight: 385.80 lbs / 175 kg per shelf
Safety Notices
KEEP ALL SAFETY MESSAGES AND INSTRUCITONS
FOR FUTURE REFERENCE!
–
Never leave children unsupervised with the
packaging material. Suffocation hazard. Keep
the shelving unit out of the reach of children. The shelving
unit is not a toy.
– Make sure you will not be drilling into electrical, gas or
water lines inside the wall. Death or injury due to elec-
tric shock may otherwise result!
– Always wear safety gloves to protect hands
from cuts, pinching and bruising.
– Verify that all assembly hardware is undamaged and
the shelving unit is assembled correctly.
–
385.80 lbs
Never exceed the maximum load of 385.80 lbs
per shelf. Otherwise the shelving unit might
break or collapse and cause death, injuries
or damage.
– The post with the weight limit must be installed in plain
sight (front). Exceeding the weight limit may cause
the shelving unit to collapse or tip, resulting in
death, injuries and / or damage to the shelving unit!
– Make sure the person assembling the shelving unit has
read the assembly instructions. If assembled incor-
rectly, the shelving unit may collapse or tip, result-
ing in death or injuries!
– Always set up the shelving unit on solid, level ground.
The shelving unit may otherwise tip, possibly re-
sulting in death or injuries!
– Verify the shelving unit is sturdy before using it.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
– Always spread the load evenly – do not overload.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
– After assembly, verify all parts are connected rmly.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
– Anchor the shelving unit securely to the wall! The
shelving unit may otherwise tip, possibly resulting
in death or injuries!
– Before anchoring, verify the wall will support the shelv-
ing unit. When in doubt, consult a licensed contractor.
The shelving unit may otherwise tip, possibly
resulting in death or injuries!
– Wall-mounting hardware ( 7, 8) suitable for standard
solid brickwork are included. The type of screw required
varies by wall construction. Always use screws and
mounting hardware suitable for the actual wall. Other-
wise the shelving unit may tip potentially resulting
in death or injuries!
Assembly
The heavy duty shelving unit can be assembled vertically or
horizontally.
vertical horizontal
Assembly and anchoring in the wall
You will need the following tools (not included):
· Philips head screwdriver
· Power drill
· for brick walls: ⅜ masonry bit
· for walls with studs (2 x 4): 1/8 wood drill bit
· Rubber mallet
Vertical assembly
Step 1
– Always wear safety gloves to protect hands
from cuts, pinching and bruising.
Attach corner brackets 5 to the posts 1 to
prevent scratching the oor.
Attach 2 long crossbars 2 and 2 short crossbars 3 to
the posts 1 by inserting them in the designated notches
and carefully tapping in place with a rubber mallet.
HEAVY DUTY SHELVING UNIT
Assembly instructions
01 / 17
AFTER SALES SUPPORT
Model: Heavy Duty Shelving Unit www.tkt-usa.com 305 704 3882

Produkt Specifikationer

Mærke: Workzone
Kategori: Ikke kategoriseret
Model: Heavy Duty Chipboard Shelving

Har du brug for hjælp?

Hvis du har brug for hjælp til Workzone Heavy Duty Chipboard Shelving stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Workzone Manualer

Workzone

Workzone 76 Piece Socket Bit Set Manual

17 August 2024
Workzone

Workzone GT-MM-08 Manual

12 August 2024
Workzone

Workzone BT-CK 18 2B-1,5 KIT Manual

12 Juli 2024
Workzone

Workzone WZEN 20 Manual

12 Juli 2024
Workzone

Workzone BT-CK 18 Li Manual

12 Juli 2024
Workzone

Workzone WW 152 Manual

12 Juli 2024
Workzone

Workzone WZ-HT 50-2 Manual

12 Juli 2024
Workzone

Workzone WW 154 Manual

12 Juli 2024
Workzone

Workzone WW 151 Manual

12 Juli 2024
Workzone

Workzone GT-MM-12 Manual

11 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

2N Telecommunications

2N Telecommunications VoiceBlue Next Manual

11 Juli 2025
Geovision

Geovision GV-IPSH30 V2 Manual

11 Juli 2025
Allsee

Allsee PT75H2 Manual

11 Juli 2025
TP-Link

TP-Link DeltaStream DS-P7500-16 Manual

11 Juli 2025
Yamazen

Yamazen TKRO-304 Manual

11 Juli 2025
Yamazen

Yamazen SSY-C8580GCST Manual

11 Juli 2025
GLP

GLP impression Wash One Manual

11 Juli 2025
Hedbox

Hedbox UNIX-FX9 Manual

11 Juli 2025
Ikea

Ikea POPPARE 204.714.62 Manual

11 Juli 2025
MuxLab

MuxLab 500514 Manual

11 Juli 2025