Worx WG401E Manual

Worx Høvlemaskine WG401E

Læs gratis den danske manual til Worx WG401E (12 sider) i kategorien Høvlemaskine. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Worx WG401E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

WARNING! Read all safety

warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁre and/or serious

injury.

Save all warnings and instructions for

future reference.

- This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

- Children should be supervised to ensure

that they do not play with the appliance.

If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualiﬁed persons in order

to avoid a hazard.

SAFETY INSTRUCTIONS

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

SAFE OPERATING PRACTICES

1. TRAINING

Become familiar with the owner’s manual

before attempting to operate this equipment.

2. PREPARATION

1) Do not allow children to operate this

equipment.

2) Do not operate this equipment in the

vicinity of bystanders.

3) Wear ear protection and safety glasses at

all times while operating the machine.

4) Avoid wearing clothing that is loose ﬁtting

or that has hanging cords or ties.

5) Only operate the machine in open space

(e.g. not close to a wall or other ﬁxed

object) and on a ﬁrm, level surface.

6) Do not operate the machine on a paved or

gavel surface where ejected material could

cause injury;

7) Before starting the machine, check that all

screws, nuts, bolts, and other fasteners

are properly secured and that guards and

screens are in place. Replace damaged or

unreadable labels.

3. OPERATION

1) Before starting the machine, look into the

feeding chamber to make certain that it is

empty.

2) Keep your face and body away from the

feed intake opening.

3) Do not allow hands or any other part of

the body or clothing inside the feeding

chamber, discharge chute, or near any

moving part.

4) Keep proper balance and footing at all

times. Do not overreach. Never stand at a

higher level than the base of the machine

when feeding material into it.

5) Always stand clear of the discharge zone

when operating this machine.

6) When feeding material into the machine

be extremely careful that pieces of metals,

rocks, bottles, cans or other foreign objects

are not included.

7) If the cutting mechanism strikes any foreign

objects or if the machine should start

making any unusual noise or vibration,

switch off the machine, disconnect the

supply and take the following steps:

 •Inspectfordamage;

 •Checkforandtightenanylooseparts;

 •Haveanydamagedpartsreplacedor

repaired with parts having equivalent

speciﬁcations.

8) Do not allow processed material to build

up in the discharge zone; this may prevent

proper discharge and can result in kickback

of material through the feed intake

opening;

9) If the machine becomes clogged, shut off

the power source and disconnect from

supply before cleaning debris. Keep the

power source clear of debris and other

accumulations to prevent damage to the

power source or possible ﬁre. Remember

that operating the starting mechanism on

engine powered machines will still cause

Produkt Specifikationer

Mærke:	Worx
Kategori:	Høvlemaskine
Model:	WG401E
Vægt:	28000 g
Produktfarve:	Black, Metallic
Strøm:	2500 W
Støjniveau:	90 dB
Klippe-system:	Blade
Skærekapacitet:	40 mm
Gennemløbs-materiale:	140 kg/t
Kapacitet for indsamlingsboks:	- L
Automatisk feeder:	Ja