Worx WX530L.9 Manual

Worx Rundsave WX530L.9

Læs gratis den danske manual til Worx WX530L.9 (32 sider) i kategorien Rundsave. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Worx WX530L.9, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Cordless Circular Saw EN

Scie circulaire sans ﬁl F

Sierra circular inalámbrica ES

P02

P14

P23

WARNING: Some dust created by power

sanding, sawing, grinding, drilling

and other construction activit ies contains

chemicals known to the State of California

to cause cancer, birth defects or other

reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement

and other masonry products

• Arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemicals, work in a well ventilated area,

and work with approved safet y equipment,

such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

WARNING: This product can expose you

to chemicals including lead, phthalate

or bisphenol A which are known to the State

of California to cause cancer, birth defects or

other reproductive harm. Wash your hands

after use. For more information go to www.

P65Warnings.ca.gov.

WARNING: Read all safety warnings,

instructions, illustrat ions and

speciﬁcations provided wit h this power tool.

Failure to follow the warnings and instructions may

result in electric shock, ﬁre and/or serious injury.

Save all warnings and instruct ions for future

reference.

The term power tool in the warnings refers to your

electric (corded) power tool or battery-operated

(cordless) power tool.

1. WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2. ELECTRICAL SAFETY

a) Power tool plugs must mat ch the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with grounded

power tools. Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with grounded

surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk

of electric shock if your body is grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving part s.

Damaged or entangled cords increase the risk

of electric shock.

e) When operating a power tool outdoors,

use an extension cord suitable for

outdoor use marked “W-A” or “W”. Use of

a cord suitable for outdoor use reduces the risk

of electric shock.

f) If operating a power tool in a damp

location is unavoidable,use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3. PERSONAL SAFETY

a) Stay alert, watch what you are doing

and use common sense when operating

a power tool. Do not use a power tool

while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment

of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or

batt ery pack, picking up or carrying the

tool. Carrying power tools with your ﬁnger on

the switch or energizing power tools that have

the switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair and

clothing away from moving parts. Loose

clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

Produkt Specifikationer

Mærke:	Worx
Kategori:	Rundsave
Model:	WX530L.9

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX530L.9 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Rundsave Worx Manualer

13 Oktober 2024

13 Juli 2024

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

Rundsave Manualer

Nyeste Rundsave Manualer

Truper SICI-4-1/2A Manual

13 Januar 2025

DeWalt DW378GT Manual

13 Oktober 2024

Triton TSA 001 Manual

12 Oktober 2024

Skil 5401 Manual

9 Juli 2024

Hitachi C 7D Manual

8 Juli 2024

Hitachi C 7SB2 Manual

8 Juli 2024

Malmbergs PLCYL-92 Manual

8 Juli 2024

Black And Decker KS865KN Manual

5 Oktober 2022

Makita LS0714 Manual

5 Oktober 2022

Makita EK7650H Manual

5 Oktober 2022