Worx WX696L.1 Manual

Worx Multiværktøj WX696L.1

Læs gratis den danske manual til Worx WX696L.1 (32 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Worx WX696L.1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
20V Cordless Oscillating Tool EN
Outil sans fil à action oscillante 20V F
Herramienta oscilante inalámbrica de 20V ES
P02
P13
P22
2
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construct ion activit ies contains
chemicals known to the State of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based pain ts;
• Crystalline silica from bricks and cement
and other masonry products;
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work wit h approved safety equipment,
such as those dust masks that are specially
designed to filt er out microscopic particles.
WARNING: This product can expose
you to chemicals including lead and
Di(2-ethylhexyl)phthalate (DEHP) which
are known to the State of California to
cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving part s.
Damaged or entangled cords increase the risk
of electric shock.
e) When operat ing a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
batt ery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair and
clothing away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection
facilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.

Produkt Specifikationer

Mærke: Worx
Kategori: Multiværktøj
Model: WX696L.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX696L.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Multiværktøj Worx Manualer

Worx

Worx WX696L.1 Manual

4 Oktober 2024
Worx

Worx WX693.9 Manual

2 September 2024
Worx

Worx WX822L.9 Manual

16 August 2024
Worx

Worx WX679 Manual

31 Juli 2024
Worx

Worx Sonicrafter WX671.3 Manual

30 Juli 2024
Worx

Worx Sonicrafter WX671.5 Manual

27 Juli 2024
Worx

Worx Sonicrafter WX671.7 Manual

21 Juli 2024
Worx

Worx WX686 Manual

20 Maj 2024
Worx

Worx WX106L Manual

26 Februar 2024
Worx

Worx WX822L Manual

18 Oktober 2023

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Draper

Draper 58300 Manual

6 Juni 2025
Draper

Draper Storm Force 58307 Manual

6 Juni 2025
Meec Tools

Meec Tools 010-644 Manual

2 Juni 2025
Draper

Draper 19392 Manual

31 Maj 2025
Vonroc

Vonroc OT505DC Manual

9 Januar 2025
Einhell

Einhell TE-MG 18/1 Li Manual

30 December 2025
Alpha Tools

Alpha Tools A 180 Manual

28 December 2024
Powerblade

Powerblade PC4MT5 Manual

10 December 2024
EGO

EGO PH1420E Manual

8 December 2024
Einhell

Einhell TE-MG 200 E Manual

23 November 2024