Worx WX915L Manual

Worx Boremaskine WX915L

Læs gratis den danske manual til Worx WX915L (28 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Worx WX915L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

20V Cordless Drill Driver EN

Perceuse visseuse sans ﬁl 20 V F

Taladro inalámbrico 20V ES

P02

P12

P20

WARNING: Some dust created by power

sanding, sawing, grinding, drilling

and other construction activities contains

chemicals known to the state of California

to cause cancer, birth defects or other

reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement

and other masonry products;

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemical: work in a well ventilated area, and

work with approved safety equipment, such as

those dust masks that are specially designed

to ﬁlter out microscopic particles.

WARNING: This product can expose you

to chemicals including lead, phthalate or

bisphenol A which are known to the State of

California to cause cancer, birth defects or other

reproductive harm. Wash your hands after use. For

more information go to www.P65Warnings.ca.gov.

WARNING: Read all safety warnings and

instructions. Failure to follow the warnings

and instructions may result in electric shock, ﬁre and/

or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) ELECTRICAL SAFETY

Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

Produkt Specifikationer

Mærke:	Worx
Kategori:	Boremaskine
Model:	WX915L

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX915L stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Boremaskine Worx Manualer

21 Januar 2025

22 April 2024

4 April 2024

12 Februar 2024

4 Februar 2024

1 Februar 2024

25 Januar 2024

17 November 2023

15 November 2023

15 November 2023

Boremaskine Manualer

Nyeste Boremaskine Manualer

Draper 70257 Manual

8 Juni 2025

Draper 56382 Manual

8 Juni 2025

Draper Storm Force 89523 Manual

8 Juni 2025

Draper Storm Force 56360 Manual

8 Juni 2025

Draper 18937 Manual

7 Juni 2025

Draper D20 55517 Manual

7 Juni 2025

Draper 56404 Manual

7 Juni 2025

Draper Storm Force 89512 Manual

7 Juni 2025

Draper 56369 Manual

7 Juni 2025

Draper Expert 56405 Manual

7 Juni 2025