Xomax XM-2VRSU717BT Manual

Xomax Ikke kategoriseret XM-2VRSU717BT

Læs gratis den danske manual til Xomax XM-2VRSU717BT (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Xomax XM-2VRSU717BT, eller vil du spørge andre brugere om produktet?

Side 1/14
Please read all instructions carefully before using
INSTRUCTIONS
Panel function description 02
Remote control function 03
Radio Function Operation 06
U Disc SD Card function operation/ 05
Access main interface 05
Turn the Unit On/Off 05
External input operation (Optional)
BT Function Operation 07
08
General setting
09
09
Trouble shooting
Touch calibration
10
Audio setup 09
Language setting
10
Date setting 09
Access setup interface 09
Other Function Operations 08
System setting
09
08
Steering wheel setting
08
EQ setting
CONTENTS
01 10
Trouble shooting
PROBLEM CAUSE CORRECT ACTION
Poor performance of
radio station
After ignition switch
off, setting information
all lose
Reset information and save
Change battery or fuse
Cannot power on
Change fuse same as the old one
Some factors cause MPU wrong operation Press RES button on the panel by
power on
penpoint, then,
Weak signal Move the car to another place, then research
Cannot switch
language/subtitle There is only one language/subtitle If not with multi - language/subtitle, it cannot switch
language/subtitle
No image Other factors cause MPU wrong operation Press [RES] button on the panel by penpoint, then,
power on
Cannot watch image
during driving It’s not allowed to watch image during driving
Check fuse
Park the car in a safe place, put the car stall in “ P
postion, pull up the hand brake, parking brake wire
must be grounded
Touch calibrate
If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibrate”. Click [Touch Calibrate] icon on system
setting interface, to confirm to access touch calibration interface.
Touching methods
Use touch pen to click the center of “+” icon, and move along with center of “+” icon so as to calibrate the screen. It shall automatically
save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be
affected.


Produkt Specifikationer

Mærke: Xomax
Kategori: Ikke kategoriseret
Model: XM-2VRSU717BT

Har du brug for hjælp?

Hvis du har brug for hjælp til Xomax XM-2VRSU717BT stil et spørgsmål nedenfor, og andre brugere vil svare dig