XS Power HD-3400 Manual


Læs gratis den danske manual til XS Power HD-3400 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om XS Power HD-3400, eller vil du spørge andre brugere om produktet?

Side 1/1
HOLD DOWN ASSEMBLY INSTRUCTIONS
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Attach two (2) spindles, and two (2) spacers to the base plate using two (2) of the long screws that are
included with your Hold Down Kit.
Locate where you want to mount the hold down and create the required mounting holes. Mount the
base by using the two (2) long screws and the two (2) washers, and two (2) nuts, included.
Attach the rubber bumpers to the bottom of the battery, one (1) in each corner, to support the ends of
the battery.
Center the battery on the Hold Down base and attach the top bracket with two (2) of the short screws
included. Tighten the screws until the top bracket holds that battery firmly in place. DO NOT OVER-
TIGHTEN OR DAMAGE TO YOUR BATTERY MAY OCCUR.
For Models: HD-1600/HD-1400/HD-3400
Document AI-1600/1400/3400-HD Effective Date 10/18/19Revision 1.00


Produkt Specifikationer

Mærke: XS Power
Kategori: Ikke kategoriseret
Model: HD-3400

Har du brug for hjælp?

Hvis du har brug for hjælp til XS Power HD-3400 stil et spørgsmål nedenfor, og andre brugere vil svare dig