Yale SR-PC Manual

Yale Bevægelsesdetektor SR-PC

Læs gratis den danske manual til Yale SR-PC (2 sider) i kategorien Bevægelsesdetektor. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Yale SR-PC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Description:

1) Learn/Test Button with LED

hold and release within 3 secs. Send test signal:

This is used when checking accessory range

(See Smart Home Alarm user manual).

hold for 10 secs+. Learn Send learn signal:

button LED will ﬂash when learn signal is sent.

2) Camera Flash

3) Camera

4) 2 x 1.5V AA Alkaline batteries

5) Cover tamper switch

Pack contents

• 1 x PIR Image Camera with batteries

• 4 x wall plugs & screws

Program your PIR before installation and test

afterwards. Please see your current Smart Home

Alarm user manual.

SPECIAL NOTE:

When inserting new batteries, the following are

disabled for 5 minutes.

• Tamper Switch

• Image will not be sent in the ﬁrst 5 minutes

Please make sure you do not trigger the PIR

Video Camera for 5 minutes before testing the

system.

Compatible with Yale Smart Home Alarms

(SR-range) ONLY.

PIR Image Camera

(SR-PC)

smart

Living

Programming & Installation

For more information on this product

and Yale Smart Living Range visit

www.yale.co.uk/smart-living

Consumer Support: info@yale.co.uk

The 2 year guarantee for this

Yale Smart Home Alarm Kit is

active from the date of purchase

(A copy of this guarantee is

available on our website).

Sleep Timer

The PIR features an automatic “sleep time” of

approximately 1 minute for power conservation.

After transmitting a detected motion, the PIR will

not retransmit for 1 minute. Any further motion

detected within this one-minute sleep period will

extend the sleep time by another minute.

LED indicator

Off Normal operation

LED ﬂash

(2 sec)

When motion is detected and the

LED ﬂashes for 2 seconds, this

indicates one of the following:

• Low battery

• Tamper switch activated

• PIR in test mode

WARNING:

When you delete the PIR Video Camera from

the system, please ensure the PIR batteries are

removed to avoid unnecessary drain.

Environmental conditions:

-10oc to 40oc , relative humidity 85%

non-condensing. Indoor use only

Radio:

2.4GHz

Motion Detection Range:

110o

Speciﬁcation

Operation

Note: Waste electrical products and batteries should not be disposed

of with household waste. Please recycle where facilities exist. Check

with your local authority or retailer for recycling advice.

Issue No. 1A

Information and illustrations are subject to change.

Yale reserves the right to alter the speciﬁcation and

product design at any time without notice.

Produkt Specifikationer

Mærke:	Yale
Kategori:	Bevægelsesdetektor
Model:	SR-PC

Har du brug for hjælp?

Hvis du har brug for hjælp til Yale SR-PC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bevægelsesdetektor Yale Manualer

Yale SR-A100-3PIR Manual

10 August 2024

Yale SR-A100-0PIR Manual

8 August 2024

Yale SR-PC Manual

8 August 2024

Yale SR-A100-3PET Manual

16 December 2022

Yale SR-EIR Manual

4 November 2022

Bevægelsesdetektor Manualer

Nyeste Bevægelsesdetektor Manualer

Crestron GLA-LDL-PC-0-10-WL Manual

9 September 2025

Biltema 46-2010 Manual

3 September 2025

Biltema 46-2009 Manual

2 September 2025

Leviton OSD10-I0I Manual

30 August 2025

Leviton OSC04-I0W Manual

30 August 2025

Leviton OSC05-M0W Manual

29 August 2025

Leviton OSC10-M0W Manual

29 August 2025

Leviton OSC20-M0W Manual

29 August 2025

Leviton OSC04-IAW Manual

29 August 2025

Leviton OSC20-RMW Manual

29 August 2025