Yamaha DTX6K-X Manual

Yamaha Musikinstrument DTX6K-X

Læs gratis den danske manual til Yamaha DTX6K-X (4 sider) i kategorien Musikinstrument. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Yamaha DTX6K-X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Thank you for purchasing the Yamaha ELECTRONIC DRUM KIT DTX6K-X. This electronic drum kit can be used in your home or a studio, or onstage for live performances. For proper

assembly and safe use, please read this assembly manual carefully before using it. After you have read the manual, keep it in a safe and handy place for future reference.

This manual describes the standard assembly procedure for the DTX6K-X electronic drum kit. It covers assembly, wiring and setting up the drum trigger module of the kit as shown

below.

ELECTRONIC DRUM KIT

DTX6K-X Assembly Manual

This manual describes the process of assembling a pad set and drum trigger module to

an already assembled electronic drum rack. Before starting the steps below, therefore,

be sure to assemble your electronic drum rack as described in the Owner’s Manual that

came with it.

Lay a drum mat (sold separately) on the floor underneath the hi-hat controller and the

kick pad. Alternatively, you can place cardboard from the drum kit packaging or the like

on the floor to prevent it from being scratched.

IMPORTANT

NOTICE

Example of standard assembly

Crash cymbal pad

Tom pad

Tom pads

Kick pad

Hi-hat controller

Drum trigger module

Hi-hat pad

Ride cymbal pad

Snare

pad

Electronic drum rack

The purpose of the precautions detailed below is to ensure that this electronic drum kit can be used safely without fear of injury or property damage. As a means of indicating the severity and immediacy

of any risk of injury or property damage resulting from incorrect operation, these precautions are classified as either WARNING or CAUTION. The instructions disp these precautions layed together with

are extremely important in terms of ensuring safety, and therefore, they should be fully observed.

* After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for future reference.

* Be sure to also read the Assembly Manuals and/or Owner’s Manuals that came with your pads and rack.

* The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat dif-

ferent from those on your instrument.

* The company names and product names in this manual are the trademarks or registered trademarks of their

respective companies.

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest

manual, access the Yamaha website then download the manual file. Since specifications, equipment or sep-

arately sold accessories may not be the same in every locale, please check with your Yamaha dealer.

NOTICE: Usage Precautions

• When connecting and disconnecting cables, be sure to hold the plug and not the cable itself. In addition,

avoid placing heavy items on top of cables and do not allow them to touch sharp edges. Failure to avoid

these precautions can lead to cable breakage and disconnection.

• Do not climb onto the electronic drum kit and avoid placing heavy objects on it. Failure to observe this pre-

caution can result in malfunction.

• Avoid using or storing the electronic drum kit in very hot locations (i.e., in direct sunlight, in close proximity to

a heater, or in a closed vehicle) or in highly humid locations (i.e., in a bathroom or outdoors in wet weather).

Failure to observe this precaution can lead to warping, discoloration, malfunction, or breakdown.

• Avoid cleaning the electronic drum kit with organic solvents, paint thinner, or alcohol as these substances

can cause warping and discoloration. Instead, we recommend you remove dust using a soft dry cloth or

wipe clean using a moist, tightly-wrung cloth. If the electronic drum kit is very dirty, first wipe the dirt away

using a cloth moistened with a neutral detergent solution and tightly wrung. Following this, wipe away the

detergent solution using a cloth soaked in water and tightly wrung.

Safety Precautions Please read carefully before proceeding.

Failure to observe the precautions described below can result in se-

rious injury or even death.

• Young children using this electronic drum kit should be supervised by a guardian to eliminate any

possibility of injury.

• Holders for cymbal and tom pads have sharp tips. In order to avoid injury, therefore, you should

take special care whenever handling these components.

• The anti-slip stoppers on kick pads and foot pedals have sharp tips. In order to avoid injury, there-

fore, you should take special care whenever handling these components.

• Be sure to securely tighten nuts and other fasteners when setting up this electronic drum kit. In

addition, be sure to proceed slowly when loosening nuts. If this precaution is not observed, pads

may fall off or the rack may collapse or fall over, possibly causing injury.

• Do not setup this electronic drum kit on a slope, on an unstable platform, or on any other unsafe

surface. If this precaution is not observed, it may topple over or fall, possibly causing injury.

• Whenever setting up this electronic drum kit, ensure that cables and the like are arranged safely. If

someone were to trip on a cable, the kit could topple over and cause injury.

• Under no circumstances should this electronic drum kit be disassembled or customized. Failure to

observe this precaution can result in injury or malfunction.

• Do not sit or stand on the rack. Doing so could cause it to fall over or break, possibly causing injury.

WARNING

Failure to observe the precautions described below can result in in-

jury and/or property damage.

• Mind your fingers when adjusting clamps. They can easily be crushed if care is not taken during

this operation.

• Be careful with the tips of supports, arms, screws, and the like. Fingers can easily be injured by

sharp tips if these components are not handled carefully.

• Do not place hands or feet under a kick pad or foot pedal. Doing so could result in injury.

• Do not use the electronic drum kit’s rack to hold acoustic drums. Doing so could cause clamps to

break and the drums to fall off, which in turn could lead to injury.

CAUTION

Manual Development Group

Published 04/2020

POMA*.*- **A0

VCR2740

Open the boxes to reveal their contents.

After opening up the packages containing your electronic drum kit, please verify that all of the following components are present.

Assemble the electronic drum rack.

For instructions on how to assemble the electronic drum rack, refer to the Owner’s Manual that came with it.

Assemble the hi-hat holder, the pads and the drum trigger module to the electronic drum rack.

Components of DTX6K-X

XP80 Snare Pad

(×1)

PCY135 Ride

Cymbal Pad (×1)

 Hi-hat pad (×1) Crash cymbal pad

(×1)

Electronic drum rack (×1)

Electronic drum rack Owner’s Manual (×1)

HH65 Hi-hat

Controller (×1)

 KP65 Kick Pad (×1) Nine-channel snake cable (×1)

Stopper for

PCY135 (×1)

Cable band (×6)

DTX6K-X Assembly Manual (this leaflet; x1)

PCY100 PCY135 PCY155 Owner’s Manual (×1)

HH65 Owner’s Manual (×1)

XP70 XP80 Owner’s Manual (×1)

TP70 Owner’s Manual (×1)

KP65 Owner’s Manual (×1)

DTX-PRO Drum Trigger Module (×1)

AC adaptor (×1)

* May not be included depending on

your particular area. Please check with

your Yamaha dealer.

DTX-PRO Owner’s Manual (×1)

Cubase AI Download information (×1)

Module holder (×1)

Module holder screw (×4)

 TP70 Tom Pad (×3) Clamp bolt

(for XP80; ×1)

Drum key (×1)

Stopper for hi-hat pad and

crash cymbal pad (×2)

Wing bolt

(for TP70; ×3)

* Has a sticker labeled

“CRASH” on the rear side.

* The illustration shows the fully assembled rack.

1. Remove the drum module clamp a and the left leg b from the left side of the rack. 2. Assemble the holder clamp for the hi-hat holder, ensuring that it is oriented as shown in the figure.

Following this, reassemble the left leg b and the drum module clamp a.

Drum module

clamp a

Left leg b

Drum module

clamp a

Left leg b

Holder clamp

Hi-hat holder

Assembling the hi-hat holder

Continued on other side