Yamaha SPS-900 Manual

Yamaha Hi-Fi system SPS-900

Læs gratis den danske manual til Yamaha SPS-900 (12 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Yamaha SPS-900, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
1 En
GJ
English Français Deutsch Español
SPEAKER STAND
SPS-900
Thank you for selecting this Yamaha product. Be sure to read this instruction thoroughly before using this stand. After you
have read this instruction, keep it in a safe place for future reference.
■ ■DIMENSION FIGURES SPECIFICATIONS
Dimensions (W x H x D):
360.3 x 603 x 415.3 mm
(14-3/16” x 23-3/4” x 16-3/8”)
Weight/unit: 6.5 kg (14 lbs. 5 oz.)
■USABLE SPEAKERS
•Soavo-2
Use the front and the rear screw holes in the bottom of the
speaker to fix the speaker.
•Soavo-900M
Use the front screw hole in the bottom of the speaker to fix
the speaker.
PRECAUTIONS
•This speaker stand is only for the speaker systems listed in “USABLE SPEAKERS” below. Do not use the speakers
other than these listed.
•To prevent the speaker from falling, use the screws and parts provided with the stand.
•To prevent the speaker stand from falling over, select a location which is flat and stable.
•To avoid accidents resulting from tripping over loose speaker cables and to prevent the speaker stand from falling over,
fix the speaker cables to the wall, etc.
•Do not let the children lean or sit on the stand as this might cause the serious accidents resulting from the falling over of
the speaker stand.
•To prevent the speaker stand from discoloring and warping, keep the speaker stand away from the stoves and places
where it will be exposed to direct sunlight, etc.
•Do not attempt to clean the speaker stand with chemical solvents as this might damage the finish. Use a clean, dry
cloth.
•When moving the speaker and stand, be sure to hold the support detached from the speaker.
•Secure placement or installation is the owner’s responsibility. Yamaha shall not be liable for any accident caused by
improper placement or installation of speakers.
415.3 (16-3/8)
175
(6-7/8)
77
(3-1/16)
49
(1-15/16)
37.5
(1-1/2)
48.5
(1-15/16)
360.3 (14-3/16)
180 (7-1/16)
73.2
(2-7/8)
320.3 (12-5/8)
572 (22-1/2)
4
(3/16)
603 (23-3/4)
25
(1)
2
(1/16)
15
(9/16)
Front view unit: mm (inch)
Top view
ASSEMBLY
INSTRUCTION
2 En
■ASSEMBLY
Before beginning assembly, check the parts list and make
sure all the parts are included.
You need a screwdriver for the assembly.
•Parts list (for 2 units)
Attaching the spikes
When setting up this unit on a thick carpet etc., attach
spikes on the bottom side of the base in order to increase
stability of this unit and to enhance sound quality.
•Attaching procedures
1.For each spike, screw a nut to the tip of the spike.
2.Screw the spike into the hole of the bottom side of
the base.
3.Place the base with the topside up in the desired
location and adjust the length of the spike to match
the depth of the carpet.
The tip of the spike may scratch or damage the flooring.
Please be careful when positioning the stand.
•Assembly procedures
Do not overtighten the screws. Doing so may damage screws or
screw holes.
1. Attach the base and the support.
Align holes in the base with holes in the support,
and then fasten 1 flat-head Phillips screws using a
screwdriver.
2. Attach the plate and the support.
Align holes in the plate with holes in the support,
and then fasten 2 flat-head Phillips screws using a
screwdriver.
When attaching the plate, put the plate with the spacer-side up on
the support.
3. Attach a speaker.
Align holes on the bottom of the speaker with holes
in the plate, and then fasten 3 speaker mounting
screws using a screwdriver.
The screw hole(s) which is (are) used varies (vary) depending on
the speaker. For details about the screw hole(s) which is (are)
used, refer to “USABLE SPEAKERS” on page 1.
4. Fix speaker cables.
Put 4 cable clamps into the conduit to fix speaker
cables after setting speaker cables into the conduit
on the back of the support.
NAME QUANTITY
1
Flat-head Phillips screws (M6 x 40 mm (1-9/16”))
6
2
Flat-head Phillips screws (M6 x 20 mm (13/16”))
6
3
Speaker mounting screws (M4 x 14 mm (9/16”))
4
4Cable clamps 8
5Spikes 8
6Nuts 8
1
3
2
4
Example:
Soavo-2
Speaker
cable
Plate
Spacer
Support
Base
Assembly figure
Note
Note
Note
Note
6
5
1
2
Bottom side of the base

Produkt Specifikationer

Mærke: Yamaha
Kategori: Hi-Fi system
Model: SPS-900
Bredde: 360.3 mm
Dybde: 415.3 mm
Højde: 603 mm
Vægt: 6500 g
Produktfarve: Sølv

Har du brug for hjælp?

Hvis du har brug for hjælp til Yamaha SPS-900 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hi-Fi system Yamaha Manualer

Yamaha

Yamaha CD-C603 Manual

10 August 2025
Yamaha

Yamaha MCR-332 Manual

31 December 2025
Yamaha

Yamaha MusicCast SRT-1500 Manual

6 Oktober 2024
Yamaha

Yamaha R-N1000A Manual

21 August 2024
Yamaha

Yamaha MusicCast NP-S303 Manual

20 August 2024
Yamaha

Yamaha R-N800A Manual

20 August 2024
Yamaha

Yamaha R-N2000A Manual

3 August 2024
Yamaha

Yamaha CRX-E300 Manual

31 Juli 2024
Yamaha

Yamaha CRX-E200 Manual

30 Juli 2024
Yamaha

Yamaha MCR-N570 Manual

21 Juli 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Elta

Elta 2444MP3 Manual

14 September 2025
Meridian

Meridian F80 Manual

14 September 2025
Panasonic

Panasonic SC-PM91D Manual

13 September 2025
Samsung

Samsung DA-E550 Manual

12 September 2025
Aiwa

Aiwa MSBTU-700DAB Manual

12 September 2025
JK Audio

JK Audio AutoHybrid IP2 Manual

11 September 2025
Shure

Shure MVX2U Manual

10 September 2025
Lynx

Lynx AES16 Manual

10 September 2025
Medion

Medion P85444 (MD 89295) Manual

9 September 2025
Reflexion

Reflexion HIF1937 Manual

8 September 2025