Zalman CNPS4X Manual
Zalman
Hardwarekoeling
CNPS4X
Læs gratis den danske manual til Zalman CNPS4X (16 sider) i kategorien Hardwarekoeling. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Zalman CNPS4X, eller vil du spørge andre brugere om produktet?
Side 1/16

User's Manual
www.zalman.com
Ver. 111219
* To ensure safe and easy installation, please read the following precaution.
* Product design and specications may be revised to improve quality and performance without notice.
Intel Socket LGA775/115X CPUs
AMD Socket AM4/AM3+/AM3/FM2+/FM2 CPUs

2
Precautions English
■ Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage
and injuries.
■ Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash o
with water. If irritation persists, seek medical attention.
■ To prevent possible injuries, gloves must be worn while handling this product.
■ Excessive force exerted on the fan may cause damage to the fan and/or system.
■ Use and keep product away from reach of children.
■ Check the components list and condition of the product before installation. If any problem is found, contact the
retailer to obtain a replacement.
■ Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes
other than its designated purposes and/or the carelessness of the consumer.
■ Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system
components.
■ During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not
responsible for any damages that occur during the transport of a system.
■ Product design and specications may be changed to improve quality and performance without notice.
Précautions
■ Ne pas insérer d’objets ou les mains dans le ventilateur pendant son fonctionnement an d’éviter des
dommages au produit et des blessures.
■ Ne pas ingérer la graisse thermique et éviter tout contact avec la peau et les yeux. Si elle entre en contact
avec la peau, rincer avec de l’eau. Si l'irritation persiste, consulter un médecin.
■ Pour éviter d’éventuelles blessures, il est obligatoire de porter des gants pour manipuler ce produit.
■ Une force excessive exercée sur le ventilateur peut endommager le ventilateur et/ou le système.
■ Veuillez utiliser et garder le produit hors de portée des enfants.
■ Avant l'installation, vériez la liste des composants et l'état du produit. En cas de problème, contactez le
détaillant an d'obtenir un remplacement.
■ Notre société n’assume aucune responsabilité pour tout problème se produisant en raison de l’utilisation du
produit à des ns autres queses objectifs désignés et/ou la négligence du consommateur.
■ Zalman Tech Co., Ltd. n'est pas responsable des dommages éventuels résultant de l'overclocking du
microprocesseur, tel que le microprocesseur et les composants du système.
■ Au cours du transport du système, le refroidisseur doit être retiré. Zalman Tech Co., Ltd. n'est pas responsable
de tout dommage qui pourrait survenir au cours du transport d'un système.
■ La conception et les caractéristiques du produit peuvent être modiées an d'améliorer la qualité et la
performance.
Français
Produkt Specifikationer
Mærke: | Zalman |
Kategori: | Hardwarekoeling |
Model: | CNPS4X |
Har du brug for hjælp?
Hvis du har brug for hjælp til Zalman CNPS4X stil et spørgsmål nedenfor, og andre brugere vil svare dig
Hardwarekoeling Zalman Manualer
5 Februar 2025
4 December 2024
4 December 2024
11 September 2024
11 September 2024
11 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
Hardwarekoeling Manualer
- SilentiumPC
- Evolveo
- Crestron
- Intel
- Arctic Cooling
- Gigabyte
- Dynatron
- Silverstone
- Akasa
- Alphacool
- MSI
- Emerson
- Iceberg Thermal
- EK Water Blocks
- Noctua
Nyeste Hardwarekoeling Manualer
9 April 2025
12 Februar 2025
13 Januar 2025
9 Januar 2025
8 Januar 2025
3 Januar 2025
26 December 2024
25 December 2024
25 December 2024
25 December 2024