Zanussi-Electrolux DA4142 Manual


Læs gratis den danske manual til Zanussi-Electrolux DA4142 (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Zanussi-Electrolux DA4142, eller vil du spørge andre brugere om produktet?

Side 1/8
1
Instruction Book - Part 1
- Before use
- Maintenance
- Installation
Contents
Before use 2
Setting the water softener 2
Filling with salt 2
Filling with rinse aid and adjusting the dose 3
Use of detergent 3
Hints and tips 4
Maintenance and cleaning 5
Internal cleaning 5
Cleaning the filters 5
External cleaning 5
Prolonged periods of non-operation 5
Frost precautions 5
Moving the machine 5
Something not working 6
Installation 7
Water supply connections 7
Water outlet connection 7
Electrical connection 7
DISHWASHER
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance
be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is
left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety
information.
This information has been provided in the interest of your safety.You MUST read it carefully before installing or using the
appliance.
Installation
This appliance is heavy. Care should be taken when
moving it.
It is dangerous to alter the specifications or attempt to
modify this product in any way.
Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
Any electrical work required to install this appliance should
be carried out by a qualified electrician or competent
person.
Any plumbing work required to install this appliance should
be carried out by a qualified plumber or competent person.
Child Safety
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls
or play with the product.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children's reach.
During Use
Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
Under no circumstances should you open the door whilst
the appliance is in operation. Always turn off the appliance
before opening the door.
Only use detergent specifically designed for use in
dishwashers.
Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
When finishing loading or unloading close the door, as an
open door can be a hazard.
Do not sit or stand on the open door.
Isolate the appliance from the power supply and turn off the
water supply after use.
Care should be taken when cleaning the bottom door seal
and hinge area as any exposed metal edges may cut if
care is not taken.
This product should be serviced by an authorised Service
engineer, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre.
Always insist on genuine spare parts.
Conservation
In the interest of the environment:
Materials marked with the symbol are recyclable.
Check with your local Council or Environmental Health
Office to see if there are facilities in your area for re-cycling
this appliance.
When the appliance is to be scrapped, cut off the power
supply cable and make the door closing device unusable to
prevent young children from being trapped inside.
Help to keep your country tidy - use authorised disposal
sites for your old appliance.
Important safety information
Before using your dishwasher for the
first time:
1. Ensure that the electrical and water connections comply
with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with salt
5. Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke,
French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener should be
adjusted.
If your water is level 1 it is already soft and therefore
there is no need to use salt.
In this case adjust the water softener on level 1 without
using salt.
Only for dishwasher models with salt refill
indicator light:
if the water softener has been adjusted on level 1 without use
of salt, the salt refill indicator light on the control panel will
always remain illuminated when the machine is switched on.
Filling with salt
Attention!
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
dishwasher, especially table salt, will damage the water
softener.
Only fill with salt just before starting a washing
programme.This will prevent any grains of salt or salty
water, which may have been spilled, remaining on the
bottom of the machine, which may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3. Using the funnel (if
provided), pour in the salt
until the container is full.
Do not worry if water over
flows from the unit when
filling with salt, this is quite
normal.
4. Replace the cap making
sure that there is no trace
of salt on the screw thread
or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
According to the model, an indicator reminds you when filling
with salt:
A) The salt cap has a refill
indicator window in the
centre.
A green float is clearly
visible when there is salt
inside the container, and
almost disappears when
the salt has finished
reminding you to add salt.
B) A salt indicator light on the
control panel will come on
when the salt has finished.
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer.
The function of the machine is not affected.
2
Before use
SR11
SALE
SALT
SALZ
SEL
SR06
Level
Water hardness
French
degrees
(°TH)
Clarke
degrees
Use
of
salt
Water
softener
adjustment
Adjustment
on the machine
AB
PPM
(parts per
million)
1
2
3
4
5
0 - 8
9 - 20
21 - 40
41 - 70
71 - 90
0 - 6
7 - 14
15 - 28
29 - 49
50 - 63
0 - 80
81 - 200
201 - 400
401 - 700
701 - 900
NO
YES
YES
YES
YES
-
-
+
-
+
NO 1
NO 1
NO 1
YES 2
YES 2
To adjust the water softener, follow the instructions given
in the chart
AA01
A
AA04
1
2
AA03
Water softener adjustment
Adjustment on the machine
AB


Produkt Specifikationer

Mærke: Zanussi-Electrolux
Kategori: Opvaskemaskine
Model: DA4142

Har du brug for hjælp?

Hvis du har brug for hjælp til Zanussi-Electrolux DA4142 stil et spørgsmål nedenfor, og andre brugere vil svare dig