4ms Pingable Envelope Generator Manual

4ms Ikke kategoriseret Pingable Envelope Generator

Læs gratis den danske manual til 4ms Pingable Envelope Generator (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om 4ms Pingable Envelope Generator, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

4ms Pingable Envelope Generator

Eurorack Module User Manual v2015-06-15

Firmware v4.3 / PCB v2.0

The Pingable Envelope Generator (PEG) from 4ms Company is a dual envelope generator whose envelope

lengths are set by the time between clock pulses or “pings”. The PEG has full CV control of envelope shape, skew,

and ping (clock) division/multiplication, as well as a plethora of triggering and cycling options (AD, AR, quantization,

cycle, cycle toggle), and a tap tempo button for each channel.

DOWNLOAD MOST RECENT MANUAL AT:

http://4mspedals.com/peg.php

Features

• Basics:

• Dual “pingable” envelope generator – total envelope time is set by time between pulses ("ping")

• Tap tempo button or external clock/triggers sets the ping time

• Two taps sets the tempo. If a third tap is given close to the tempo to the first two taps, the two timing periods

will be averaged

• Envelope time is a multiple or division of the ping clock (from /8 to x8) set by Ping Div/Mult knob and CV

• Curve knob and CV control the shape of the output envelope. Various combinations of exponential, linear,

logarithmic, and interpolated curves, separately for rise and fall portions

• Skew knob and CV control the ratio between rise and fall times without changing total envelope time.

• Fastest rise time=10µs, fastest fall time=100µs. Slowest rise/fall time=15 min (30 min total)

• Envelope is triggered by Quantized trigger jack, Asynchronous trigger jack, and/or Cycle mode

• Outputs and scaling/shifting:

• Scale knob is an attenuating inverter for main envelope output

• Maximum 0V to +10V non-inverted

• Minimum -10V to 0V inverted

• Bi-polar button centers main envelope output around 0V (-5V to +5V output)

• “+5V ENV” jack is a non-scaling output that always produces a 0V to +5V envelope

• “OR” jack outputs an analog OR mix of the two channels' scaled envelope curves

• Gate/Trigger outputs:

• End-of-Rise (EOR) gate output goes high when envelope finishes a rise portion, and goes low when envelope

begins a rise portion. Optional trigger mode

• End-of-Fall (EOF) gate output goes high when envelope finishes a fall portion, and goes low when envelope

begins a fall portion. Optional trigger mode

• Half-R (Half-Rise) gate outputs 90-degree phase shifted gates that go high when 50% of the of the rise time

portion has elapsed, and goes low after 50% of the of the fall portion (this is different than a voltage time

comparator-based design). Optional trigger mode

• Tap Clock Output: (enabled in System Edit Mode) dedicated Tap Tempo clock output (gate or trigger)

• Triggering/cycling:

• Cycle button for each channel makes envelope self-cycle (LFO mode). Button lights up when on

• “T” jack toggles the state of both channels' Cycle buttons while a gate is applied

• “QNT” jack for each channel triggers an envelope to start at the next quantized beat, with respect to the

divided/multiplied ping clock. Holding a gate high on this jack causes the envelope to repeat.

• “Async” jack for each channel causes an envelope to output immediately (asynchronously). Holding a gate high

results in an AR envelope (rise-sustain-fall). A trigger on Async jack enters Async mode, where the envelope is

no longer phase-locked to the ping clock. A trigger on QNT exits Async mode and enters Sync mode.

• CV input jacks:

• CV control of each channel's Ping Div/Mult, Skew, and Curve using the CV jacks.

• Respective knobs set the center offset for the applied CV

• CV of 0-10V will modulate the parameter's full range – however, a 0-5V CV will modulate the parameter within

a useful range.

• System Mode:

• Special mode to change advanced parameters

• Re-assign the Half-Rise jack to EOR (and vice-versa)

• Re-assign the EOF jack to Tap Tempo Clock output

• Select Gate or Trigger output from EOR/EOF/Half-R jacks

• Require a continuous external ping clock (unit will not free-run if external ping clock stops)

• Enable/disable skew limiting that keeps fastest rise/fall times at 6ms

Dimensions

• 20 HP Eurorack format module

• 1.6” (40mm) deep

Power consumption

+12V rail:

60mA max with 5V Source jumper selecting external 5V

105mA max with 5V Source jumper selecting internal 5V

+5V rail:

40mA max with 5V Source jumper selecting external 5V

not used with 5V Source jumper selecting internal 5V

-12V rail:

35mA max

Page 2

Produkt Specifikationer

Mærke:	4ms
Kategori:	Ikke kategoriseret
Model:	Pingable Envelope Generator

Har du brug for hjælp?

Hvis du har brug for hjælp til 4ms Pingable Envelope Generator stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret 4ms Manualer

4ms Pod 104X Manual

30 Juli 2025

4ms Listen Up Manual

1 Oktober 2024

4ms Buff Mult Manual

22 September 2024

4ms Catalyst Sequencer Manual

2 September 2024

4ms Looping Delay Manual

23 August 2024

4ms Sampler Manual

23 August 2024

4ms VCA Matrix Manual

15 August 2024

4ms Ensemble Oscillator Manual

11 August 2024

4ms Pod 34X Manual

2 August 2024

4ms Rotating Clock Divider Manual

31 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-3811 Manual

30 Juli 2025

Intermatic EI230W Manual

30 Juli 2025

Rockboard LED Light V2 Manual

30 Juli 2025

Advantech USB-5817 Manual

30 Juli 2025

Electro Harmonix 9DC-100 Manual

30 Juli 2025

Advantech UTC-515H Manual

30 Juli 2025

Extron MGP 641 xi 5K Manual

30 Juli 2025

Festo EMME-AS-80-M-LS-AMB Manual

30 Juli 2025

Tiptop Audio Octogain Manual

30 Juli 2025

Artec SE-ADL Manual

30 Juli 2025