7inova 7W225 Manual

7inova Wifi repeater 7W225

Læs gratis den danske manual til 7inova 7W225 (2 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 12 anmeldelser. Har du et spørgsmål om 7inova 7W225, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

300Mbps Wireless Ceiling Mount Access Point

Quick Installation Guide

Model: 7W225

Package Contents:

The device’s interface description

Power supply mode

Before you start to use this device, please check if there’s anything missing in the

package, and contact your dealer of purchase to claim for missing items:

This manual suit for quick installation of indoor 300m 11N wireless AP & High Power Router.

This manual will instruct you how to configure and manage this 7W225 indoor 300m 11N

wireless AP & High Power Router in right ways.

Gatewy:

WAN/LAN Connection, from

internet to user

AP:

Conversion from Wired

networking to Wireless

networking

Repeater/WDS:

Bridge the Wireless

networking via two or more

APs, to booster the wi-fi signal

and extend Range

WISP:

Wireless Access, Wireless out

or LAN out, DHCP Enable

1. DC power supply: the DC’s electronic standard is 12V/1A, connection diagram as follow:

2. Powered over Ethernet: Connect device’s WAN/LAN Port with PoE adapter by LAN Cable (Both

LAN port and WAN port support the 12V/24V PoE.)

3. When powered by 24V/1A PoE, this ceiling AP 7W225 can be PSE power supply for another

7W225 from Wan port or Lan port

Attention: line 4,5 must be positive electrode, Line 7,8 must be negative electrode in RJ45

Port.Just as the picture shows below, Device A’s WAN port connect with 24V/1A PoE Power

Adapter, then A’s LAN port supply 12V/1A power for B.

1st .Connection and power supply

2nd.login and launch

Wrong connection or unauthorized power adapter may damage the device.

If you computer include 802.11b/g/n functions but cannot find wireless connection,please

contact the after-sell departement of your computer supplier when in those situation.

1)Right click“network neighborhood”and chose "attribute" no wireless connection exist.，

2)Wireless connection existed, Right click it and chose "attribute",there are "normal" and

"advance" in the menu,but no "wireless network configuration" exist.

3)Other computer or wireless device connection is normal.

1x Ceiling AP

1x DC 24V 1000mA POE adapter

1x auxiliary tools for installation

1x Quick installation guide manual

1x Quality certificate

1x Warranty Card

Working mode Description

Wire connect

Wireless connection

1)connect 7W225 device and computer by Wired/Wireless

2)Get the IP address automatically or manually configure

A. manually configure

configure local IP address as 192.168.0.x(X can be selected from 2-254) the same network

segment as 7W225 subnet mask 255.255.255.0 As P2 and P3 shows.，，

After basic configuration, if you want use wireless internet,you can configure computer wireless

connection as local connection settings mentioned above. Right click "wireless network

configuration",chose "check available wireless connection",find the connecting name"7W225" the ，

default Passwords is"66666666"

P2 IP configuration of computer network

P4 IP Address setting

P 5 Wireless Connection

P1 7W225`s Interface

P3 IP configuration of computer network card

LAN Setting

3) Log in the CPE: Open your web browser, type

192.168.0.1 in the address bar, enter the User

name/Passwords: preset as admin/admin, then

you can found on the label attached to the router,

click OK

Enter into the page of WEB software management page, then set the ceiling AP as requirement. The

default working mode is Gateway, but we take Repeater for example to show how to select the right

working mode. Click Wizard, then select the Operation modem, then next to enter into another page.

● Basic Setting: configure the SSID, Channel, passwords if require, like P13

● Setting Finish: Click Finish after configure all the data, pop up a window and ask whether

continue to changing even the 7W225 will reboot. Choose OK to continue and waiting system

reboot.

● Checking Status: After reboot, the working mode of 7W225 Ceiling AP is Repeater. Our PC and

other wireless device can access to and get Ethernet from the top end AP or router by 7W225 in

Repeater Mode. The user should change PC’s IP address to one from 192.168.0.2~254, then can

access to 7W225 and checking the status.

After checking the status successful, we finished the Repeater working mode setting.

For other mode, can be configured and setted similiar like WDS.

Click Management to enter into the management page as follow P15

Set Working Mode: Select Repeater Mode in P8, click Next

LAN IP Address Setting: Fill in the IP Address we need, it will show like P9 after configure

DHCP Server: DHCP Server is unable in default under Repeater mode, click Next to continue

● Connect with Wireless AP: Click Search Wireless AP in page P10, then choose the right wireless

AP in P11. Then input the right passwords and click Next to continue in P12

3nd steps: Operation mode setting

Management

Trouble Shooting

● System: export the default data, or load the new configure file to restore the AP’s system, or

reboot to default setting.

● Manager: set the the manager and passwords for 7W225

● Log: Log Enable or disable, or view the system log from here

● Firmware upgrade: Upgrade new firmware to access stable function

P9 LAN Setting

P10 Scan AP

P11 AP List after scan

P12 Passwords input

P7 Wizard Page

P8 Operation mode select

P13 Basic Setting

P14 Change the working mode

P15 Management Page

P6 User name and passwords input

Form 1 Symptoms and Treatment

Forget the login user name and

passwords

Forget the AP’s SSID and

passwords

Restore to factory default

Can’t access to AP’s IP address

1. Check the AP’s DHCP and make it enable in Gateway mode and WISP mode

2. Check the connection between 7W225 and the top networking in AP and

Repeater mode

No Power indicator 1. If DC Power, check the local power supplier

2. If PoE Power, check the PoE adapter and Internet cable

1、Pls make sure the PC and 7W225’s IP Address are in same network

segment, can be checked through Ping: PC start--input CMD in Run,

then ping 192.168.0.1

2 Login after Restore 7W225 to factory default、

3、Make sure there isn’t any equipment take IP address of 192.168.0.1 in

7W225 networking

4、Check your computer and network cable to avoid any problem,

recommend to use unshielded twisted pair 10/100M Ethernet cable.

Can’t login 7W225 through WEB

management

Symptoms Treatment

The 7W225 can restore to factory default by press the Reset button last more than 10

seconds. Then 7W225 will restore to factory default setting after WiFi LED flash off and

System reboot.

Produkt Specifikationer

Mærke:	7inova
Kategori:	Wifi repeater
Model:	7W225

Har du brug for hjælp?

Hvis du har brug for hjælp til 7inova 7W225 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Wifi repeater 7inova Manualer

15 August 2024

15 August 2024

15 August 2024

15 August 2024

Wifi repeater Manualer

Nyeste Wifi repeater Manualer

Crestron DM-TX-401-S2 Manual

24 September 2025

Crestron DM-TX-201-S2 Manual

23 September 2025

ComNet NetWave NW1/M Manual

23 September 2025

ComNet RLFDX232S2/24DC Manual

22 September 2025

ComNet NetWave NWK2 Manual

22 September 2025

ComNet RLFDX485S2/24DC Manual

22 September 2025

ComNet RLFDX485M2/48DC Manual

22 September 2025

ComNet NetWave NW1DR Manual

22 September 2025

ComNet RLFDX232S2/48DC Manual

22 September 2025

ComNet Netwave NW2 Manual

22 September 2025